New Products Flash Sale
Thread Tools
Old May 09, 2009, 07:58 PM
benovsoff is offline
Find More Posts by benovsoff
Registered User
benovsoff's Avatar
the spoilerons worked much better than the flaps today.
Sign up now
to remove ads between posts
Old May 09, 2009, 09:15 PM
Toppers is offline
Find More Posts by Toppers
Registered User
Toppers's Avatar
I stalled onto the nose wheel, causing it to push back into the fusilage.

Fixed it up using about 1" of a popsicle stick and 5 minute epoxy. Nothing fancy, no removal of foam, the stick just slides down the gap. Seems to be stronger that the original stock, so we'll have to see if it holds up.
Old May 09, 2009, 10:36 PM
W. X. Davis is offline
Find More Posts by W. X. Davis
Registered User
W. X. Davis's Avatar
I'm trying for a more scale look. Want to upgrade the cockpit along with
retracts, lights and maybe flaps. Right now using flaperons and they seem to work ok.
Questions:
1) Has anyone fiberglassed this? I'm thinking 3/4 oz w/ wbpu
2) Any motor upgrades?
3) Any three bladed props that will work here?
4) Anyone know the c/g?

Any info will be appreciated.
Woody
Old May 09, 2009, 10:46 PM
Prof100 is offline
Find More Posts by Prof100
Registered User
Prof100's Avatar
Quote:
Originally Posted by W. X. Davis
I'm trying for a more scale look. Want to upgrade the cockpit along with
retracts, lights and maybe flaps. Right now using flaperons and they seem to work ok.
Questions:
1) Has anyone fiberglassed this? I'm thinking 3/4 oz w/ wbpu
2) Any motor upgrades?
3) Any three bladed props that will work here?
4) Anyone know the c/g?

Any info will be appreciated.
Woody
Smoke if you got 'em and watch the replies. I will take #2. Search for "35-36C motor mount" in this thread and you'll find tons of posts. Here is a link to on board video of it wearing out a lipo. The video camera weighs another 5 ounces.

T28 Trojan RC plane with Turnigy 35-36c and 11x7 prop (3 min 25 sec)
Old May 09, 2009, 11:15 PM
W. X. Davis is offline
Find More Posts by W. X. Davis
Registered User
W. X. Davis's Avatar
Jeeze, " We're going ballistic Mav "

Ok, that's a start. THX
Woody
Old May 10, 2009, 01:07 AM
Texasredrider is offline
Find More Posts by Texasredrider
Mines faster than your's
Texasredrider's Avatar
I stripped an aeileron servo on a belly landing and have to replace it. I have a couple of HXT900's that I will put in. Has anyone used these? Are they slower than the original digital servos?
Old May 10, 2009, 08:52 AM
Prof100 is offline
Find More Posts by Prof100
Registered User
Prof100's Avatar
Quote:
Originally Posted by Texasredrider
I stripped an aeileron servo on a belly landing and have to replace it. I have a couple of HXT900's that I will put in. Has anyone used these? Are they slower than the original digital servos?
Yes, they work fine. All of the planes I have of this size fly with the venerable HXT 900 servos. They're too cheap to even bother repairing.
Old May 10, 2009, 08:55 AM
Prof100 is offline
Find More Posts by Prof100
Registered User
Prof100's Avatar
Quote:
Originally Posted by W. X. Davis
Jeeze, " We're going ballistic Mav "

Ok, that's a start. THX
Woody
You are welcome. The video is from last year and the plane is still flying fine. I took the gear off for more air speed. It's also suffered one crash due to making a final approach into the setting sun. I had to pluck it from a farmer's muddy corn field.
Last edited by Prof100; May 10, 2009 at 06:38 PM.
Old May 10, 2009, 04:50 PM
robj is offline
Find More Posts by robj
Registered User
robj's Avatar
Quote:
Originally Posted by Texasredrider
I stripped an aeileron servo on a belly landing and have to replace it. I have a couple of HXT900's that I will put in. Has anyone used these? Are they slower than the original digital servos?
I found out like some did here you have to replace both with the hxt900. When I tried replacing just 1, they both moved in the same direction if I recall. I guess it's the 2 digital servos, have no idea. Just a heads up.
Old May 10, 2009, 04:51 PM
Kmart is offline
Find More Posts by Kmart
Registered User
Kmart's Avatar
I replaced my ailerons with them, even though only one stripped. Its good to have them the same.

Works fine for me.
Old May 10, 2009, 06:31 PM
finchkid24 is offline
Find More Posts by finchkid24
100% addicted to RC :)
finchkid24's Avatar
Well, I CRUNCHED my T-28 today. It was totally pilot error...I took of with my TX set to my Mini Pulse XT and ailerons were reversed. It went in to a shipping container at about 3/4 throttle and really exploded on impact. They all have to die sometime, and at least mine went out with a bang. Not sure if I will get another T-28, try the Corsair out, or wait for PZs suspected release later this summer.
Old May 10, 2009, 07:41 PM
datsfubar is offline
Find More Posts by datsfubar
another damned tree!
datsfubar's Avatar
Quote:
Originally Posted by finchkid24
Well, I CRUNCHED my T-28 today. It was totally pilot error...I took of with my TX set to my Mini Pulse XT and ailerons were reversed. It went in to a shipping container at about 3/4 throttle and really exploded on impact. They all have to die sometime, and at least mine went out with a bang. Not sure if I will get another T-28, try the Corsair out, or wait for PZs suspected release later this summer.
Bummer.
Old May 10, 2009, 07:46 PM
datsfubar is offline
Find More Posts by datsfubar
another damned tree!
datsfubar's Avatar
Quote:
Originally Posted by Toppers
I stalled onto the nose wheel, causing it to push back into the fusilage.

Fixed it up using about 1" of a popsicle stick and 5 minute epoxy. Nothing fancy, no removal of foam, the stick just slides down the gap. Seems to be stronger that the original stock, so we'll have to see if it holds up.
I hit a rock on take off today and the same happened to me. I'm gonna have to come out with something like that also.
Old May 10, 2009, 08:07 PM
steelydan is offline
Find More Posts by steelydan
Registered User
What is the rumor mill saying about the PZ release later this summer????



Quote:
Originally Posted by finchkid24
Well, I CRUNCHED my T-28 today. It was totally pilot error...I took of with my TX set to my Mini Pulse XT and ailerons were reversed. It went in to a shipping container at about 3/4 throttle and really exploded on impact. They all have to die sometime, and at least mine went out with a bang. Not sure if I will get another T-28, try the Corsair out, or wait for PZs suspected release later this summer.
Old May 10, 2009, 08:24 PM
benovsoff is offline
Find More Posts by benovsoff
Registered User
benovsoff's Avatar
Quote:
Originally Posted by steelydan
What is the rumor mill saying about the PZ release later this summer????
they are going to release another warbird like the t-28/corsair. not sure what it is though


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article ParkZone T-28 Trojan RTF Review Jim Walker Electric Warbirds 893 Oct 31, 2016 01:25 AM
Official Parkzone P-51 Owners Thread - Part 2 monitor Parkflyers 2602 Jun 15, 2014 05:51 PM
Discussion Parkzone T-28 Trojan Thread Edge767 Parkflyers 6527 Jun 04, 2008 06:29 AM
Sold Parkzone T-28 Trojan, 480 960kv Motors (2) Joe in Dublin Aircraft - Electric - Power Systems (FS/W) 4 Jan 17, 2008 02:34 PM
Wanted Parkzone T-28 Trojan webejpn01 Aircraft - Electric - Airplanes (FS/W) 4 Oct 25, 2007 03:48 PM