Thread Tools
Old Feb 20, 2013, 07:57 PM
rdcskkrose is online now
Find More Posts by rdcskkrose
TEAM HILLBILLY
rdcskkrose's Avatar
WOW! (maybe watch out for the thread police after this one! Big Jim Graham is watching. LOL.)

I like the sound so much, I just built a 73" 35CC gasser because my buddy got himself a 88" 60CC gasser and I couldn't handle it anymore. LOL.

That sound is worth every penny too me.

Quote:
Originally Posted by 1crazyflyer View Post
That seems like a gross waste of money.
It don't even sound good.
The T28 makes pleanty of sound on it's own.
But then again it's your money.
or was your money till you spent it.
Last edited by rdcskkrose; Feb 20, 2013 at 08:05 PM.
Sign up now
to remove ads between posts
Old Feb 20, 2013, 09:37 PM
ronaldj is offline
Find More Posts by ronaldj
Ottawa, Canada - Summer
Question - I am getting ready to maiden my PZ T28. I loaded the DX8 settings from Spektrum.

As I am a beginner, I am planning to start with the easy settings, position 2, on the dx8. But in that switch position the DR for the elevator is 47. Is that enough elevator to get off the ground. It seems low but if it will work why not.
Old Feb 20, 2013, 09:42 PM
cmdl is offline
Find More Posts by cmdl
http://www.sgvhumane.org/
cmdl's Avatar
i use a dx4e and low rates on that are sufficient - 70% travel for that radio. so you should be fine with 70%. you may be fine with 47% too - i'm just suggesting what worked for me.
Old Feb 21, 2013, 12:47 AM
Danny_l is offline
Find More Posts by Danny_l
Registered User
Danny_l's Avatar
RonaldJ,
I strongly advise that you get an experienced person to check the plane and possibly do the maiden for you.

If you are inexperienced and anything is out of balance or needs trimming while flying it can be overwhelming and turn a lovely occassion into a regretable one.

Brgds,
Danny
Old Feb 21, 2013, 12:49 AM
ty_horn is offline
Find More Posts by ty_horn
Philippians 4:13
Quote:
Originally Posted by BlinkguY View Post
to be honest.. im not an expert guy but the t28 is the one i learned to do knife edges and low level inverted passes
me too. Exactly what I was going to say. I love to fly in circles for several minutes in a knife edge with my t-28. It almost feels like it wants to be in a KE
Old Feb 21, 2013, 12:55 AM
Justwingit is online now
Find More Posts by Justwingit
They call me Lipo.....
Justwingit's Avatar
Quote:
Originally Posted by Danny_l View Post
RonaldJ,
I strongly advise that you get an experienced person to check the plane and possibly do the maiden for you.

If you are inexperienced and anything is out of balance or needs trimming while flying it can be overwhelming and turn a lovely occassion into a regretable one.

Brgds,
Danny
+1

Unless you have some sort of prior experience with model airplanes or a good, working knowledge of aerodynamics and basic flight principles, a wonderful day could turn into a really bad one in about 30 seconds....

Strongly encourage you to seek the help of a friend who has experience with RC aircraft before the maiden; although the T-28 is a very good model for a relatively new(ish) pilot, it's also a very capable airframe and can get away from an inexperienced pilot fairly quickly...

Not trying to rain on your parade...just trying to be the umbrella

John
RCG Plus Member
Old Feb 21, 2013, 05:35 AM
PittSpecial is offline
Find More Posts by PittSpecial
Right Rudder
PittSpecial's Avatar
What John and Ty said.....
Old Feb 21, 2013, 08:06 AM
walter3rd is offline
Find More Posts by walter3rd
I just want to go fly!
walter3rd's Avatar
the elevator works very well so it should be enough... but... some guidance at the field might be needed. MAKE SURE THE AILERONS ARE CORRECT! what a easy way to crash a pretty plane. standing behind the plane, move stick left, left should go up. double check that. she does not stall easily but experience is still needed. visually trim the surfaces perfectly flat and do this with the clevises not the radio. thats a good start. she flys just fine on low rates too. get her up high right away and trim her out way up there. dont mess around low to the ground. she is VERY floaty and once trimmed will almost fly herself. ALMOST!
Old Feb 21, 2013, 10:13 AM
danike_42 is offline
Find More Posts by danike_42
Registered User
Quote:
Originally Posted by ArneHu View Post
I had a lot of trouble with the front ski cracks, when it's deep snow. Or it hits a hole or a hard lump. Thinking of buying the Jay Dee skis, but they are expensive.
The front small Dubro, have a tendency to bury down in the snow, or cracks when it's lumpy ground. Still thinking how to fix the problem. I have belly landing also, but it's more fun ROG.
The Dubro Snowbird are made for 4 mm undercarriage. T-28 have 2,9 mm.
Thanks Arne,
I just might try the floats off of my Flyzone Beaver.. you can pick up a set of those for around $15.
Old Feb 21, 2013, 10:17 AM
Tom Moody is offline
Find More Posts by Tom Moody
Registered User
Well, I fly electric because it is nearly SILENT and anyone that adds sound to make it noisy must be nuts. If you want noise get a gasser. Just my 2 cents.

I fly at our field early in the morning with a few other e flyers and when the gas and glow guys show up I pack up and leave.

Tom Moody
Old Feb 21, 2013, 10:43 AM
ronaldj is offline
Find More Posts by ronaldj
Ottawa, Canada - Summer
Danny, John: Thanks for the warnings. In fact there is a fun fly this weekend so maybe I will take it there and see if someone will maiden it for me.

I have checked the aileron and they are operating correctly, as walter3rd describes. I had to adjust a couple of the linkages to align the surfaces and the left and right aileron now have the same amount of movement up & down. But I am sure some fine tuning will be required once in the air. I understand these models are a bit nose heavy so I expect some elevator trim may be needed.

I have been able to master the t28d with Phoenix set on the advanced setting for this model. My heli experience should be of some help as well.

So I think I am as ready as I am going to be. But that said, I'll see if I can find a mentor for the 1st flight. If I can't, I have foam ready ca standing by. Wish me luck.
Old Feb 21, 2013, 10:57 AM
dstewart51 is offline
Find More Posts by dstewart51
When in doubt, gas it!
dstewart51's Avatar
^ Just dont be in a rush to get it in the air on take off. Let it role and pick up speed as you increase the power progressively to about 3/4. Then very gently give just a bit of up elevator and it will float off the ground with good airspeed.

Be prepared to give pitch and role corrections once off the ground just in case your not trimmed very well at first. With each of my PZ T-28s I've found they want to climb slightly with perfectly neutral control surfaces with > 1/2 power. I mechanically trim the elevator linkage down maybe 1 to 2 turns from flat.
Last edited by dstewart51; Feb 21, 2013 at 11:02 AM.
Old Feb 21, 2013, 11:47 AM
walter3rd is offline
Find More Posts by walter3rd
I just want to go fly!
walter3rd's Avatar
once airborn climb out at a steady rate but dont get her to steep. sounds like with heli experience you should be plenty coordinated to tackle fixed wing.
Old Feb 21, 2013, 12:47 PM
ronaldj is offline
Find More Posts by ronaldj
Ottawa, Canada - Summer
Quote:
Originally Posted by walter3rd View Post
once airborn climb out at a steady rate but dont get her to steep. sounds like with heli experience you should be plenty coordinated to tackle fixed wing.
That\s what I'm hoping. As everything is frozen here, I am looking at a nice smooth private rink on a nearby river to take off on. I have lots of open space there and the smooth rink will provide a good take off and landing spot.

I just need a nice sunny, no wind day. They are few and far between.
Old Feb 21, 2013, 12:56 PM
chucksolo69 is offline
Find More Posts by chucksolo69
Registered User
Ronald, please DO NOT equate "mastering" the T-28 Trojan on a sim to actually flying the plane for real. Sims teach you somethings and lie to you about others. I believe you are doing the right thing in going to a club and getting someone to setup and maiden it for you. You may even get one of those folks to "buddy box" it with you. Good Luck.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article ParkZone T-28 Trojan RTF Review Jim Walker Electric Warbirds 893 Oct 31, 2016 01:25 AM
Official Parkzone P-51 Owners Thread - Part 2 monitor Parkflyers 2602 Jun 15, 2014 05:51 PM
Discussion Parkzone T-28 Trojan Thread Edge767 Parkflyers 6527 Jun 04, 2008 06:29 AM
Sold Parkzone T-28 Trojan, 480 960kv Motors (2) Joe in Dublin Aircraft - Electric - Power Systems (FS/W) 4 Jan 17, 2008 02:34 PM
Wanted Parkzone T-28 Trojan webejpn01 Aircraft - Electric - Airplanes (FS/W) 4 Oct 25, 2007 03:48 PM