Thread Tools
Nov 13, 2012, 12:24 AM
They call me Lipo.....
Justwingit's Avatar
Mine's had packing tape on it now for months...

100+ degree heat and dozens of flights...still holding wonderfully

Maybe once that goes I'll go for the blenderm, but for now, the ol' packing tape isn't showing any signs of wearing out
Sign up now
to remove ads between posts
Nov 13, 2012, 04:43 AM
Dirtnap Certified
Flyindude's Avatar
I reckon the 3 blade takes around 1-1.5mins off an average mixed flight vs the 2 blade. The 3 blade (MA I used) sounds better and looks better but you do lose some speed. The T-28 stock is a little underpowered as is, upgrades have been well documented in this thread already (G10, Power 10 etc).
Nov 13, 2012, 02:23 PM
Registered User
I don't think I saw anyone using Headsuprc's Power 15, or if they did I don't recall reading much about it like you do with the Power 10. Digging it so far, time will tell.
Nov 13, 2012, 03:06 PM
Registered User
Link dosen't seem to work.
Last edited by john97618; Nov 13, 2012 at 03:06 PM. Reason: Messed up. Not where it should be.
Nov 13, 2012, 06:11 PM
Blacked out 350z - Texas
Wrice4's Avatar
Hey everyone I got my t-28 in the mail today. Is the prop shaft supposed to be this noticeably bent
Nov 13, 2012, 06:14 PM
Freedom Isn't Free
Warningshot's Avatar
Quote:
Originally Posted by Wrice4
Hey everyone I got my t-28 in the mail today. Is the prop shaft supposed to be this noticeably bent
Yes. It should be down and to the side.
Nov 13, 2012, 06:24 PM
Blacked out 350z - Texas
Wrice4's Avatar
Quote:
Originally Posted by Warningshot
Yes. It should be down and to the side.
Thank you I thought it was bent.
Nov 14, 2012, 11:53 AM
Registered User
If you take off the cowl, you will notice it is the motor mount that causes it to point down and to the right a bit..
Nov 14, 2012, 12:00 PM
Blacked out 350z - Texas
Wrice4's Avatar
Quote:
Originally Posted by chucksolo69
If you take off the cowl, you will notice it is the motor mount that causes it to point down and to the right a bit..
Awesome, thanks for the response guys. I opened it up and was like that SOB bent it.
Nov 14, 2012, 01:06 PM
Registered User
justin144's Avatar
Quote:
Originally Posted by cmdl
does home depot sell tiny magnets? they're much closer than the LHS.
Radio Shack does
Nov 14, 2012, 01:57 PM
Go 4th Air Force
pmacko's Avatar
Quote:
Originally Posted by BlinkguY
do you guys like my new rc plane hanger???

and this is a pic with my new friends at the park... great sunday it was.... guess who im I in the picture
Looks like a fun bunch of guys
Nov 14, 2012, 03:43 PM
Registered User
BlinkguY's Avatar
anyone has used the Turnigy D3536/9 910KV on it???? Any test? i want to buy that motor right now
Nov 14, 2012, 05:07 PM
WrongRudderR/C
FlattyFlier's Avatar
Delete
Last edited by FlattyFlier; Nov 14, 2012 at 05:45 PM. Reason: Moving on
Nov 14, 2012, 05:14 PM
Registered User
BlinkguY's Avatar
Jesus christ man.... God is going to punish you
Nov 14, 2012, 05:24 PM
build, fly, crash...repeat
marksp's Avatar
Quote:
Originally Posted by BlinkguY
anyone has used the Turnigy D3536/9 910KV on it???? Any test? i want to buy that motor right now
Pretty close - I have the D3536/8 1000kV motor in one of my T-28's. Running a 10x10E on 3S and it's super fast!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article ParkZone T-28 Trojan RTF Review Jim Walker Electric Warbirds 893 Oct 31, 2016 12:25 AM
Official Parkzone P-51 Owners Thread - Part 2 monitor Parkflyers 2602 Jun 15, 2014 04:51 PM
Discussion Parkzone T-28 Trojan Thread Edge767 Parkflyers 6527 Jun 04, 2008 05:29 AM
Sold Parkzone T-28 Trojan, 480 960kv Motors (2) Joe in Dublin Aircraft - Electric - Power Systems (FS/W) 4 Jan 17, 2008 01:34 PM
Wanted Parkzone T-28 Trojan webejpn01 Aircraft - Electric - Airplanes (FS/W) 4 Oct 25, 2007 02:48 PM