Simple Delta... a quick build "prop on the front" delta
This is my Simple Delta.
Its inspiration came from a thread on the Wattflyer... Delta and Flying Wings forum.. http://www.wattflyer.com/forums/showthread.php?t=17498
I was looking for a simple easy to build Delta
I also needed something that would make a lot less noise than the more common pusher or prop in a slot Delta designs, as I like to fly at a local park early in the mornings
The design that interested me seemed to be popular with a group of flyers in the Seattle area...of the several designs used, I picked on a triangular design with the point chopped off, as the roll rate looked very impressive.
You don't really need a plan for this one
WS is 20"
LE is 7" long
LE to TE (hinge line) is 14.25"
Elevons are 2" wide
Fus is 8.5x1.75"
Try 5" as a CG start point from LE, mine works ok at 6"
The Fin is 5" tall by 10.5" long.The Fin proper starts 8" from it's front and slopes back 2.5"
There are 3mmx.5mm CF flats on the leading edges....prevents damage from weeds! There is also a 3mmx.5mm CF spar
My plane has a 6mm floormate wing(cheap Depron subsitute) and a Fus and Fin from 10mm Epp Scrap. The feet/underfins are also made of 10mm Epp
The running gear is an Ele C20 2500kv on 5x3 prop with a 10A esc
I use a Thunder Power 730mA 3s lipo AUW 5.8oz
A BW would also be a good choice
Thanks Kosh and Seattle's flyers...
Goldguy's posts #371 & 467 provide additional info, covering his improved & tidied up SD
His Slofly SD info is to be found in post #1972 and 1980, Thanks for the help Frank
Chewy's Tiled plans are in Post #516.. Thanks to Box for tileing them
Another plan for the SD by Leebospeed Thanks Lee... post#538
More help from Aeronot " post 1086 has plans: One simple set of 22inch wingspan simple delta plans is at post 1076 good for windy days...
Fin: A simple Fin with an aft angle of 105 is at post 1073 extra links added to post 1076
FFF, alternative simple delta and counterbalanced elevons, Kosh's post post 1172 looks very nice for small spaces, slow flight"
Last edited by dekan; Feb 15, 2010 at 06:01 PM.
I think that you perhaps have inspired me to finish this one.
After trying this one of mine, I think yours will be next. I really like its lines and simplicity. Mine is a shameless pilfering of other designs of basically the Pribos for the airfoil, the hyperflea for shape shrunk to 20" WS and 17" nose to tips of elevons, and a dart fuse and vert stab. I too want a tractor for silent flight. The rudder and wheels will allow for control on the ground as well as ROG. Yours will be for a knock around plane to use at the farm. I don't have anything without wheels to land in tall grass. I think that yours will be the ticket. Maybe I will just sell my two HF cores. It is so much fun to make something out of flat plate foam. I am amazed by the full fuse planes, but these are so simple. I was never sure about the CG on my design but will play around with the suggestion on yours as well.
My middle Name is Simple ....Just ask the misses. Just started to cut it out but just come up from the Dungeon to check the picture. I'm just going off your measurements and Yep its simple Dekan.
Mate its blow'n and raining here at the moment. Good cutting weather. So back to it.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Looking for info or chart on the park 400 4200 motor for prop size, amps||himeros||Electric Plane Talk||1||Oct 17, 2005 09:47 AM|
|Outrunner: Prop on shaft or can?||XTheOwl||Power Systems||2||Aug 31, 2005 10:46 PM|
|Question||Prop on left or right DD tail?||pike||Micro Helis||7||Apr 06, 2005 01:42 PM|
|Can I use a 3 or 4 bladed prop on my GWS Corsair???||Valid8r||GWS (Grand Wing Servo)||10||Jan 18, 2005 08:38 AM|
|prop ? on B50 13s (Kmashima or Ed Lyerly)||rcman||Sport Planes||11||Apr 12, 2003 03:21 AM|