Zwarte Zee Setup help
I have purchased the Zwarte Zee (billing kit) and want to convert it
I am a flyboy and not a water rat and wish to know what I need to do
to keep the water out, or to a minimum and what I should do to keep
the radio gear dry.
Does anyone have a piccie of their setup that i could use.
Any other hints also welcome (keep it clean...)
Thanks In advance for your help
Blueskies (or in this case smooth sailing)
Re: Zwarte Zee Setup help
If it is the ABS version then no problems - just put in a standard prop
shaft etc. The wood version is more difficult - you need to first ensure
thathe hull is waterproof - You can line the inside with skinning epoxy
thinned down - it will then soak in to the wood- once dry (overnight) fill
the hull with water and look for leaks. Fix them before going on.
Graupner used to do a prop shaft assy for this boat but if it's not
available buy one or go to AsTec Models who can supply to order....
www.astecmodels.co.uk . For the rudder it is difficult. I built the rear
most deck fitting (the little gear cover) as a removable piece of deck then
mounted the rudder stock under it with the actuatore on top. The servo motor
etc was all in the main hull.
,"michael" <email@example.com> wrote in message
> Hi Everyone,
> I have purchased the Zwarte Zee (billing kit) and want to convert it
> to rc.
> I am a flyboy and not a water rat and wish to know what I need to do
> to keep the water out, or to a minimum and what I should do to keep
> the radio gear dry.
> Does anyone have a piccie of their setup that i could use.
> Any other hints also welcome (keep it clean...)
> Thanks In advance for your help
> Blueskies (or in this case smooth sailing)
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Logo 10 setup help||rcdude||Electric Heli Talk||10||Jan 09, 2002 08:46 PM|
|Crazy Max Setup Help Please||ETKing||Parkflyers||3||Dec 23, 2001 07:02 PM|
|Piccolo Setup Help!||rcastab||Electric Heli Talk||6||Dec 16, 2001 02:39 AM|
|logo 16 setup help||mkurosaka||Electric Heli Talk||0||Jul 27, 2001 12:09 AM|
|9Z and JR Voyager E Setup Help Wanted Please||Brett||Electric Heli Talk||3||Jul 01, 2001 08:00 PM|