3DHobbyShop 51" Andrew Jesky SLICK - Page 620 - RC Groups
Thread Tools
Oct 09, 2009, 12:38 PM
Sippin the Koolaid!
losifanatic's Avatar
Quote:
Originally Posted by YamaDan
LOWER!!! lol
Thats the words I was thinking of too
Sign up now
to remove ads between posts
Oct 09, 2009, 12:43 PM
Guerilla Huck Power..activate!
smelyal8r's Avatar
Quote:
Originally Posted by hugocraft
The landing gear is fixed as well as the innards of the fuse. The cowling will get touched up with paint and the wheel pants will get epoxied. I was just looking for an excuse to get a new 51" but glad cayars motivated me to fix it. Save the $$$ and get a bigger slick.
Check the connectors on your battery and ESC. I was blaming a signal loss that put my Slick in (without any damage luckily) when after further investigation I found a loose deans connection on the positive wire. Check it out.

Brett
Oct 09, 2009, 02:08 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
Hey guys, my Slick is almost built, I am going to put an AR6200 in it. Anyone see any issues with that?
Oct 09, 2009, 02:09 PM
Test your skills....fly IMAC!!
sun.flyer's Avatar
Quote:
Originally Posted by i love nachos
Hey guys, my Slick is almost built, I am going to put an AR6200 in it. Anyone see any issues with that?

Nope, should work out great in the Slick.

Tim
Oct 09, 2009, 02:19 PM
Registered User
rcdrum's Avatar
Quote:
Originally Posted by i love nachos
Hey guys, my Slick is almost built, I am going to put an AR6200 in it. Anyone see any issues with that?
That's what's in mine, no problems

RC
Oct 09, 2009, 02:31 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
6200 should be great, I continue to fly my 51" Slicks on AR6100 just to see how it works. Perfect for well over a year now.
Oct 09, 2009, 02:35 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
Quote:
Originally Posted by blucor basher
6200 should be great, I continue to fly my 51" Slicks on AR6100 just to see how it works. Perfect for well over a year now.

Ohhhh you are tempting the cheap @$& in me Ben!!!
I may just have to do that.
Oct 09, 2009, 02:37 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
Be aware, I spread magic pixie dust on mine.

Or so I've been told.
Oct 09, 2009, 02:43 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
Gotcha. If I have the money I will go AR6200. Unless I can find some pixie dust for less than $30.
Oct 09, 2009, 03:26 PM
OOPS
Manta1's Avatar
i wouldnt be scared of the 6100s in the slick at all. i dont like the 6200,but its a personal issue for me
Oct 09, 2009, 03:29 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
haha I knew you would chime in on this. Did you replace your Slick? Do you use the 6100?
Oct 09, 2009, 03:34 PM
JUNK RADIO
Flazo's Avatar

issues


Quote:
Originally Posted by i love nachos
Hey guys, my Slick is almost built, I am going to put an AR6200 in it. Anyone see any issues with that?
Never.

Fred
NYC.

BTW I use a BEC.
Oct 09, 2009, 03:38 PM
Sippin the Koolaid!
losifanatic's Avatar
Quote:
Originally Posted by i love nachos
Hey guys, my Slick is almost built, I am going to put an AR6200 in it. Anyone see any issues with that?
I dont know how you hold out. If I didnt get my planes built the night I got I would be upset with myself. Then I maiden the next morning(even if I have to call in from work) How do you guys have that much self control?
Oct 09, 2009, 03:45 PM
Some Sharp Looking Cheddar
i love nachos's Avatar
HAHAHA. I did that with the Vyper. Lack of funds is how I manage to wait it out. That and waiting for that little brown box from China full of goodies.
Oct 09, 2009, 04:58 PM
May the Farce be with you...
refugeefromcalif's Avatar
Quote:
Originally Posted by blucor basher
Be aware, I spread magic pixie dust on mine.
You know, that can be taken a Few Different ways...

Jorge61


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need New 3d Plane from Previes gear. NoMercy 3D Flying 2 Jun 06, 2006 04:07 AM
New 3D planes from GWS? assib GWS (Grand Wing Servo) 4 Feb 24, 2005 12:34 AM
Sneak Peak At NEW 3D Plane from Dick Rankin thechosen1one Foamies (Kits) 5 Oct 11, 2004 01:27 PM
New 3D Planes from Fliton LTChip Parkflyers 1 Jun 19, 2003 02:17 PM
New "3D Aircraft" Discussion Group Proposal Tim H. Foamies (Kits) 1 May 02, 2003 09:57 PM