Thread Tools
Aug 27, 2009, 04:38 PM
Pro Bro #1008
birdie_in_texas's Avatar
Nice..!
Sign up now
to remove ads between posts
Aug 27, 2009, 06:30 PM
Ready, Post, Aim
wedgewing's Avatar
Quote:
Originally Posted by wedgewing
can anyone provide the wing measurements (each side) for a 51" Slick wing?

lengths for Leading edge, wing tip, trailing edge, and inside edge (fuselage side)?

Building a rack system and my 51" Slick is on the boat

Thanks in advance

Keith
need some help on the above question if anyone has their tape measure handy

thanks
Aug 27, 2009, 08:57 PM
The RED filters through
RedTalon's Avatar
per my tape measure...

Fuselage edge = 12 15/16
Leading Edge = 22 7/16
Trailing Edge = 23 3/4
Wing Tip = 7 3/4
Aug 27, 2009, 08:58 PM
55' Edge is too sweet!
dprc's Avatar
Quote:
Originally Posted by birdie_in_texas
Ok..no laughing, but this seems "ok"..and I still need servos and batteries..so "cheap" is good for me..

http://www.hobbyking.com/hobbyking/s...idproduct=7393
Birdie,

Go with this one. We are running one of ours on this one with a 14 x 7 with great results. 60 am Turnigy ESC.

dp

http://www.hobbyking.com/hobbyking/s...0_750Kv_/_600W
Aug 27, 2009, 09:04 PM
It's gone...
_OZ_'s Avatar
Reaper GR-45 or Hacker A30-12XL
Aug 27, 2009, 09:08 PM
The RED filters through
RedTalon's Avatar
Love the Reaper - I've got 7 flights on mine now... Good times
I have no experience with the Hacker.
Aug 27, 2009, 09:12 PM
Pro Bro #1008
birdie_in_texas's Avatar
The reaper and the hacker are great motors..just out of my price range..

that Turnigy is out of stock, but this one is in, and it seems like a powerhouse!
http://www.hobbyking.com/hobbyking/s...idProduct=7393
Aug 27, 2009, 09:17 PM
It's gone...
_OZ_'s Avatar
a $75-$99 motor for a $219.00 plane is out of your price range?
Aug 27, 2009, 09:17 PM
55' Edge is too sweet!
dprc's Avatar
Quote:
Originally Posted by birdie_in_texas
The reaper and the hacker are great motors..just out of my price range..

that Turnigy is out of stock, but this one is in, and it seems like a powerhouse!
http://www.hobbyking.com/hobbyking/s...idProduct=7393
KV seems a little high..but JMO.


Good luck...post results.


dp
Aug 27, 2009, 09:18 PM
Go guerrilla
jfv61's Avatar
3S or 4S? If we're talking 4S then I agree kv is a little high.
Aug 27, 2009, 09:18 PM
OOPS
Manta1's Avatar
Quote:
Originally Posted by _OZ_
a $75-$99 motor for a $219.00 plane is out of your price range?
reaper
Aug 27, 2009, 09:19 PM
55' Edge is too sweet!
dprc's Avatar
Quote:
Originally Posted by jfv61
3S or 4S? If we're talking 4S then I agree kv is a little high.
I was assuming 4S.

dp
Aug 27, 2009, 09:20 PM
Go guerrilla
jfv61's Avatar
Quote:
Originally Posted by dprc
I was assuming 4S.

dp
Right, I agree. That's what most of us run, Birdie didn't say though.
Aug 28, 2009, 05:41 AM
Registered User
dgrainger's Avatar

Glow Slick Questions


Quote:
Originally Posted by JClark
Update on the Glow-slick.
Ready to go just need a header and it will be here Thurs.
What Header/Muffler are you using?
Smoke?
Do you anticipate adding weight to the tail?
What changes did you have to make to the motor mount/firewall?
Aug 28, 2009, 07:28 AM
Ready, Post, Aim
wedgewing's Avatar
Quote:
Originally Posted by RedTalon
per my tape measure...

Fuselage edge = 12 15/16
Leading Edge = 22 7/16
Trailing Edge = 23 3/4
Wing Tip = 7 3/4
thanks very much

Keith


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need New 3d Plane from Previes gear. NoMercy 3D Flying 2 Jun 06, 2006 04:07 AM
New 3D planes from GWS? assib GWS (Grand Wing Servo) 4 Feb 24, 2005 12:34 AM
Sneak Peak At NEW 3D Plane from Dick Rankin thechosen1one Foamies (Kits) 5 Oct 11, 2004 01:27 PM
New 3D Planes from Fliton LTChip Parkflyers 1 Jun 19, 2003 02:17 PM
New "3D Aircraft" Discussion Group Proposal Tim H. Foamies (Kits) 1 May 02, 2003 09:57 PM