3DHobbyShop 51" Andrew Jesky SLICK - Page 1593 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 28, 2012, 10:23 PM
Registered User
Alex Schauer's Avatar
Quote:
Originally Posted by JetPlaneFlyer
Terrible in actual use, or was it just the internal design issues which you listed?
I had one die right when I hooked one up and another one got suuuuper hot just holding it with no load. other two were fine....but that was enough for me to send em all back!
Sign up now
to remove ads between posts
Dec 28, 2012, 11:50 PM
bryansifsof44's Avatar
Quote:
Originally Posted by AeroKen
I saw a guy at our field carefully start his plane with a starter and all the proper precautions on the starting bench. He taxied out and it died on the runway. And then he got impatient, hand flipped it right there on the runway with no protection, and got his fingers cut. Safety equipment only works when you use it

I fly electric, so no starting worries. But I do keep a rubber band holding the left stick down when I'm not flying. I've thought about a throttle cut switch, but I worry that I'd accidentally hit it during a flight and not fumble it back fast enough to avert disaster. So far dealing with what I want the plane to do, what it actually is doing, two sticks and a dual rate switch uses up all of my available brain power - nothing left over for another switch Maybe more practice will change that.
The switch I use is my throttle hold on my helis, so I am pretty quick with it.
Dec 29, 2012, 01:06 AM
Registered User
hertzrepkeith's Avatar
Quote:
Originally Posted by stormz
Same here with my 30cc/ not a issue anymore my hand is coming towards me after the flip anyway
I will add one to your hand coming back towards you. (I am also taking a step sideways as I flip it!
Dec 29, 2012, 11:18 AM
Registered User
tacdriver's Avatar
+1 on getting your hand out of the way, and turning it via the spinner or front of prop to index it before flipping since the DLE will send a spark when the magnets pass, despite any rpm. the OS ignition has an rpm cutoff so the pop won't happen.

hey wait... isnt' this an electric thread? Hah!
Dec 29, 2012, 05:32 PM
Don't give in to gravity
Gravitycheat's Avatar
Name: 2012-12-23_14-14-31_113.jpg
Views: 140
Size: 166.8 KB
Description: Had some excitement the other day. About to take off, gave it full throttle, heard a screech and the motor quit. Then some smoke appeared followed shortly there after by flames. I ripped the battery out with a pair of pliers and a buddy poured some water on the motor box.

Just charred the wood around the motor box and put a small melted spot on the cowl. New ESC and i should be back in the air.
Dec 29, 2012, 05:37 PM
Registered User
chq28's Avatar
Wow, that looks like it was exciting!
Dec 29, 2012, 05:51 PM
Don't give in to gravity
Gravitycheat's Avatar
It was excitingly scary in a " I wish it had not happened to my plane" kind of way.
Dec 29, 2012, 06:11 PM
Well, now that you know ...
Bigster's Avatar
Well, there's your problem.
Dec 29, 2012, 06:35 PM
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by Bigster
That's Funny!
Last edited by Gravitycheat; Dec 29, 2012 at 06:51 PM.
Dec 29, 2012, 06:57 PM
Addicted to 3DHS and EF
3Daddict's Avatar
Quote:
Originally Posted by Gravitycheat
Attachment 5405334Had some excitement the other day. About to take off, gave it full throttle, heard a screech and the motor quit. Then some smoke appeared followed shortly there after by flames. I ripped the battery out with a pair of pliers and a buddy poured some water on the motor box.

Just charred the wood around the motor box and put a small melted spot on the cowl. New ESC and i should be back in the air.
Did you ever figure out why your speed control caught fire? what brand was it?
Dec 29, 2012, 07:03 PM
Sippin the Koolaid!
losifanatic's Avatar
It caught fire so l would be willing to bet its a castle. Wait crap l have all castle escs
Dec 29, 2012, 07:06 PM
Addicted to 3DHS and EF
3Daddict's Avatar
Quote:
Originally Posted by losifanatic
It caught fire so l would be willing to bet its a castle. Wait crap l have all castle escs
I have several castles and have not had issues. But I have heard of others having problems since they started making them in china. I still feel they are a good speed control. I just ordered a ZTW 50 amp for my 47'' extra because my hacker X-55 was bad out of the box and is out of warranty.
Dec 29, 2012, 08:35 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by losifanatic
It caught fire so l would be willing to bet its a castle. Wait crap l have all castle escs
Not Castle....Castle ESCs have red, black and white motor wires (at leas all of mine do)....

SteveT
Latest blog entry: My hangar...
Dec 29, 2012, 08:47 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
It's bad enough when it's a 51" Slick.....even worse when it's an 89" Slick!!

SteveT
Latest blog entry: My hangar...
Dec 30, 2012, 12:05 AM
Registered User
This happened on my 51" slick to but it was my Hacker A30-12XL2 that took out my ICE 75.
Lucky for me the damage to the plane was minimal so a new esc + Motrofly motor & I was back in the air


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need New 3d Plane from Previes gear. NoMercy 3D Flying 2 Jun 06, 2006 05:07 AM
New 3D planes from GWS? assib GWS (Grand Wing Servo) 4 Feb 24, 2005 01:34 AM
Sneak Peak At NEW 3D Plane from Dick Rankin thechosen1one Foamies (Kits) 5 Oct 11, 2004 02:27 PM
New 3D Planes from Fliton LTChip Parkflyers 1 Jun 19, 2003 03:17 PM
New "3D Aircraft" Discussion Group Proposal Tim H. Foamies (Kits) 1 May 02, 2003 10:57 PM