3DHobbyShop 51" Andrew Jesky SLICK - Page 1098 - RC Groups
Thread Tools
Apr 18, 2011, 12:37 PM
Registered User
robj's Avatar
Quote:
Originally Posted by propnut07
I am ready to buy a new 3dhobby ship and want to buy an AJslick.The indecision is whether or not to order the 51 or 59 size.I currently fly the 55edge and SHP and have flown other 3d hobby planes just never a slick.

am I better off starting out with a 51 or should I just plunge ahead and get the new 59..

I stayed away from the slicks but given everyones testimonials I have to believe its an easy 3d plane given my experience with bens planes/
I love my 51, flys like it's a lot bigger. looks it to!. But I can still get it in my CRV without taking the wings off. The 59 I would have to remove them. So I'm sticking with a 51 and 70 for now. Actually going to a 70 would be my next move for you flying a 55. Bigger more expsnsive parts though.
Sign up now
to remove ads between posts
Apr 18, 2011, 12:41 PM
Registered User
Quote:
Originally Posted by robj
I love my 51, flys like it's a lot bigger. looks it to!. But I can still get it in my CRV without taking the wings off. The 59 I would have to remove them. So I'm sticking with a 51 and 70 for now. Actually going to a 70 would be my next move for you flying a 55. Bigger more expsnsive parts though.
Speaking of SLICKS, how would you say the new 59" compares to the 57" Extra SC?
Apr 18, 2011, 12:48 PM
iumop ap!sdn w,I
G.P.'s Avatar
Quote:
Originally Posted by collinss
Speaking of SLICKS, how would you say the new 59" compares to the 57" Extra SC?
Not many people can answer that question yet.
Apr 18, 2011, 01:40 PM
Ta-dah!
blakevan's Avatar
Quote:
Originally Posted by FireyFate
I keep hearing that the 51" motor and servos don't really transfer to any other plane, while the 59" is closer to a few other models.
Can you say Byper?
Apr 18, 2011, 02:07 PM
Registered User
FireyFate's Avatar
Quote:
Originally Posted by blakevan
Can you say Byper?
Ohhhh yeah forgot about that. Well speaking current generation then!

Also I reaaaally don't want to wait until I total my Slick to build a bipe... but I hate to have two identical power systems!
Apr 18, 2011, 04:18 PM
Sippin the Koolaid!
losifanatic's Avatar
Quote:
Originally Posted by collinss
Speaking of SLICKS, how would you say the new 59" compares to the 57" Extra SC?
Ask Joe, Arron, or AJ that. They are about the only one that can answer that one right now
Apr 18, 2011, 05:16 PM
Registered User
Well, I just killed my AMR last week - still hard to say that - so I guess I'll wait around for 3DHS bipe. Anyone wanna start a new rumor?? I'm sure Ben would love that.

In the meantime, I guess I'll just have to amuse myself with the Hyperion Enigma that is due to arrive tomorrow. Anyone who hasn't checked it out should do so - kinda crazy.

Hyperion Enigma 3D with Thrust Vectoring (1 min 58 sec)


Not bad for $99.95, incl the motor and delivery, huh? And if you break it, I think the motor would work nicely in the Buck Huck.

Steve
Last edited by sgomes; Apr 18, 2011 at 05:24 PM.
Apr 18, 2011, 11:06 PM
OOPS
Manta1's Avatar
Quote:
Originally Posted by blakevan
Can you say Byper?
oh you mean the one we were playing pass the tx with on sunday after everyone left?
Apr 18, 2011, 11:09 PM
Ta-dah!
blakevan's Avatar
Quote:
Originally Posted by Manta1
oh you mean the one we were playing pass the tx with on sunday after everyone left?

FLI is just around the corner.
Apr 18, 2011, 11:11 PM
OOPS
Manta1's Avatar
hehe i was joking i saw no byper at seff.doesnt mean it wasnt there but i didnt saw it.
Apr 19, 2011, 04:49 PM
Registered User
Dahly's Avatar
Hi all,

Going to order a 51" in orange (104" already coming) for the evening practice in the back yard...

I have a couple of questions.

Is the recommened Hacker set-up the "best" around.

Also, have been reading about several stripped servos HS85 MG.

I am planning to go the HS5085 digital.

Any thoughts / recommendations would be appreciated.
Last edited by Dahly; Apr 19, 2011 at 05:07 PM.
Apr 19, 2011, 05:17 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
Quote:
Also, have been reading about several stripped servos HS85 MG.
The 85's have been very durable for us. We sometimes fly on Hs-65MG, but those really are marginal and are prone to stripping. Upgrading the recommendation to 85MG solved this for us during the original development of the airplane.
Apr 19, 2011, 05:33 PM
Registered User
Dahly's Avatar
Hi blucor....

You guys do a great job on your planes....

I cant wait for the 104" to get in....

I need to call down and get this 51" on order as well....

Talk to ya soon.
Apr 19, 2011, 09:16 PM
Sippin the Koolaid!
losifanatic's Avatar
The only time I have stripped a servo gear(85mgs) in the 51 slick is with a full throttle down line tumble. Did that twice. Now I think the biggest factor in the gears stripping is that they were worn and had slop in the gear train both times
Apr 19, 2011, 10:25 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
Quote:
Now I think the biggest factor in the gears stripping is that they were worn and had slop in the gear train both times
Exactly. You are reaching the 4th level of mystical RC knowledge.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need New 3d Plane from Previes gear. NoMercy 3D Flying 2 Jun 06, 2006 05:07 AM
New 3D planes from GWS? assib GWS (Grand Wing Servo) 4 Feb 24, 2005 01:34 AM
Sneak Peak At NEW 3D Plane from Dick Rankin thechosen1one Foamies (Kits) 5 Oct 11, 2004 02:27 PM
New 3D Planes from Fliton LTChip Parkflyers 1 Jun 19, 2003 03:17 PM
New "3D Aircraft" Discussion Group Proposal Tim H. Foamies (Kits) 1 May 02, 2003 10:57 PM