3DHobbyShop 51" Andrew Jesky SLICK - Page 1044 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 23, 2011, 02:24 PM
Sippin' on Kool Aid
I run turnigy packs also.

Losi, I like that mantra. Lemme go change my LVC lower. Lipos are cheaper then airframes.
Sign up now
to remove ads between posts
Jan 23, 2011, 03:24 PM
Registered User
DFflyer's Avatar
How do you find out what the LVC is set at and change it?
Jan 23, 2011, 04:05 PM
Sippin' on Kool Aid
Quote:
Originally Posted by DFflyer
How do you find out what the LVC is set at and change it?
If your using a castle link, it comes up in the info there. Otherwise, i think it has their auto-lipo setting.
Jan 23, 2011, 04:17 PM
Sippin the Koolaid!
losifanatic's Avatar
Quote:
Originally Posted by DFflyer
How do you find out what the LVC is set at and change it?
Some are on or off and some are programmable. Its in the instrutions of the escs
Jan 23, 2011, 04:38 PM
Registered User
DFflyer's Avatar
Alright, thanks.
Jan 23, 2011, 07:36 PM
It's gone...
_OZ_'s Avatar
Quote:
Originally Posted by losifanatic
I have mine set lower as I would rather kill a lipo than a plane. Manta1 taught me that. It has saved me too
He has more puffy lipos than anyone I know. They look like sausages with wires.
Jan 23, 2011, 07:42 PM
Here We Go!
Safety Hawk's Avatar
Quote:
Originally Posted by _oz_
he has more puffy lipos than anyone i know. They look like sausages with wires.
lol.
Jan 23, 2011, 09:15 PM
Destructive Tester
jimmy34256's Avatar
Quote:
Originally Posted by _OZ_
He has more puffy lipos than anyone I know. They look like sausages with wires.
Red Hots or Smokies ???
Jan 23, 2011, 09:41 PM
Sippin the Koolaid!
losifanatic's Avatar
Quote:
Originally Posted by _oz_
he has more puffy lipos than anyone i know. They look like sausages with wires.
Quote:
Originally Posted by jimmy34256
red hots or smokies ???
lol!!
Jan 23, 2011, 09:45 PM
It's gone...
_OZ_'s Avatar
Depends on the brand.
Jan 23, 2011, 10:16 PM
No one has more fun than me
aerosheldon's Avatar
If I wanted to put digital servo's in a 51, what are my choices?
Jan 23, 2011, 10:29 PM
I don't want to "Switch Now"
pmackenzie's Avatar
I used Hyperion DS13TMB.
Fit perfect and you can use the Dubro Futaba heavy duty arms.

Pat MacKenzie
Jan 23, 2011, 10:58 PM
It's a BIG park
PrkFlyrRic's Avatar
Quote:
Originally Posted by aerosheldon
If I wanted to put digital servo's in a 51, what are my choices?
I'm pulling Hextronik D-MG16's out of my 51" right now and replacing them with HS-5085mg's.
The D-MG's worked fine, (and are a hair faster), but it was always in the back of my mind that they only put out 44oz. torq @ 6v, the 5085's put out 60oz @ 6v.
Ric
Jan 23, 2011, 11:02 PM
I don't want to "Switch Now"
pmackenzie's Avatar
Quote:
Originally Posted by PrkFlyrRic
I'm pulling Hextronik D-MG16's out of my 51" right now and replacing them with HS-5085mg's.
The D-MG's worked fine, (and are a hair faster), but it was always in the back of my mind that they only put out 44oz. torq @ 6v, the 5085's put out 60oz @ 6v.
Ric

The DS13TMBs are 117 ounce-inch at 6 volts
Jan 24, 2011, 07:53 AM
I like the violent stuff!
Pat I bought my 51" Slick last year at the AMA show with the power set up. Took one look at the stock Hacker mount and said no way. Went out to the mini-shop in the garage and had a new done in no time. IMHO if you are concerned, take care of it. If you have the chance to make one , do it! I'll even send you a sketch with all the dimensions so you don't have to sit there with a calculator and figure it out. Some people need extreme hardware, some do not. Why risk a 600 dollar beauty?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need New 3d Plane from Previes gear. NoMercy 3D Flying 2 Jun 06, 2006 05:07 AM
New 3D planes from GWS? assib GWS (Grand Wing Servo) 4 Feb 24, 2005 01:34 AM
Sneak Peak At NEW 3D Plane from Dick Rankin thechosen1one Foamies (Kits) 5 Oct 11, 2004 02:27 PM
New 3D Planes from Fliton LTChip Parkflyers 1 Jun 19, 2003 03:17 PM
New "3D Aircraft" Discussion Group Proposal Tim H. Foamies (Kits) 1 May 02, 2003 10:57 PM