I am making a mini depron dino, i am using a parkzone vapor brick. i would like to use a v tail function on it. i am binding it to a DX6. however the ruder/aileron are back to front. can you swap them around via the DX6?
thanks for the help

Does anyone know where there might be a set of plans (full size) for a Giant Ugly Stik? FB has balsa kit with no prints and wants to build it with gas and a duplicate in foam for EP. Thanks in advance...Dart

Originally Posted by poweredlawndart

Does anyone know where there might be a set of plans (full size) for a Giant Ugly Stik? FB has balsa kit with no prints and wants to build it with gas and a duplicate in foam for EP. Thanks in advance...Dart

Uh my EX might know where the Giant ugly stick is...damn good thing I stopped drinking!

Still asking.
Anyone know of a set of plans for PT-17 Foam. Larger, say 45+ wing. And somewhat simi-profile build. Want to get Equip. inside of Fuz.
SARG5

Originally Posted by SARG5

Still asking.
Anyone know of a set of plans for PT-17 Foam. Larger, say 45+ wing. And somewhat simi-profile build. Want to get Equip. inside of Fuz.
SARG5

you might start here https://www.rcgroups.com/forums/show....php?t=1243813
and than ask if any more 3D plans available.
UPDATE:Plans page 2 post 22-25 Just scale in adobe reader 127%

So I came upon this thread but there were WAY too many links so I decided to just ask. I have a 24gr motor (and a 20gr one BTW), some 9gr and 5 gr servos, and a 10 amp ESC. And of course also a reciever. I am looking for a hardcore 3d foamy, profile or full fuse, that would match these electronics. All suggestions appreciated. Thanks

-joker

EDIT: I also have a few batts ranging from 370mah to 500mah, and both 2s and 3s

Look on RC Groups look on RC Groups for the Lil Ripper

Yes, I have already seen that, are there any other suggestions?

-joker

Originally Posted by joker24458

Yes, I have already seen that, are there any other suggestions?

-joker

Im sure you have but looked here.https://www.rcgroups.com/forums/show....php?t=1333878

This might work. https://www.rcgroups.com/forums/showthread.php?t=860796

I have looked at both. Also Leadfeather's Edge and Yak. Is that all there is???

-joker

Looking for a FULL BODY YAK-54 plans in about 45/55 inch range Foam
SARG5

Just started to design a drone using Kfm2 wing.

http://subsonichobby.blogspot.com/20...cdrone-v1.html

Here are a few of mine that i built painted

Nice Phantom

Originally Posted by Justapoke

Nice Phantom

Yes it is!

Paul - do you have plans???