Thread Tools
This thread is privately moderated by LOGICAL_PSYCHO, who may elect to delete unwanted replies.
Aug 05, 2010, 04:25 PM
Combat: You're doing it wrong.
chewbaccah's Avatar
Quote:
Originally Posted by Edmonds
I thought that printer "drivers" or whatever they are called automatically do that. If I print a picture that is too big, four sheets come out of the printer.
RE
You are right, I think most printer drivers will do that, however, they generally do not print "tick" marks, or locators to help line the pages up. That is where the program comes in handy.
Sign up now
to remove ads between posts
Aug 07, 2010, 11:28 PM
Registered User
just felt like posting some comments on my new x-31 free from www.rcpowers.com

i love this plane. she has a very high AOA and can high alpha with the best of them. also she was one of the first planes designed to fly at 70 degrees AOA in real life. the design was later modified to make the united nation fighter, eurofighter.

i did a consecutive 6 roll combo and regularly race cars on the interstate traveling at about 70 mph. this plane has some get up. endless vertical, very stable and high maneuverability.

i even like it more than my nitroplanes ef 2000 eurofighter. hope this makes someone else fall for this plane. just follow the recommendations to a point.

thanks
Aug 10, 2010, 07:48 AM
Registered User
Hey guys,

i am about to build an r/c plane, so i need a plan for a basic/trainer electric plane that has wingspan of about 30-40 in. It does not matter if it is balsa or foam, as long as it flies well i will appreciate it . Thanks
Aug 10, 2010, 08:14 AM
Airplane Killer
SumthinsFishy's Avatar
Hi Stefan. Taje a look at the blu baby
Dave
Aug 10, 2010, 08:26 AM
Registered User
Thanks Dave,


It is a nice plane, but i would not mind some more planes
Aug 10, 2010, 10:30 AM
Some epoxy & it flies again...
Low Pass's Avatar
Stefan,

I know this thread is long, but simply go through here or look at www.parkjets.com or www.6mmflyrc.com or similar.

Stefan
Aug 11, 2010, 06:49 PM
Registered User
Derek242's Avatar

fokker


does anyone have plans for a fokker d-7 like this. i like it but i would rather make a fokker biplane than triplane
https://www.rcgroups.com/forums/showthread.php?t=425387
-Derek
Aug 14, 2010, 11:25 AM
Registered User
Quote:
Originally Posted by Derek242
does anyone have plans for a fokker d-7 like this. i like it but i would rather make a fokker biplane than triplane
https://www.rcgroups.com/forums/showthread.php?t=425387
-Derek
https://www.rcgroups.com/forums/showthread.php?t=851608
Post No. 7
Aug 16, 2010, 09:40 AM
Registered User

Blu_Dragonfly foamy plans


Well I hope it is okay to post this here but I think I have included working pdf's.
I took the basic layout of the wing to motor of the blu_baby and put a twist on it. I think she flies like a dream.

here is a video link to it:
blu dragonfly (1 min 14 sec)
Last edited by shasmi; Aug 23, 2010 at 08:13 PM.
Aug 17, 2010, 02:55 PM
Registered User
flyelectcl's Avatar
I love it, what is the motor setup, this is now on my build list
Aug 17, 2010, 03:14 PM
Registered User
Turnigy 1000mAh 2S 30C Lipo Pack

Motor: BM2408-21T
BESC: 18A

I bought the combo pac from hobbyking

https://www.hobbyking.com/hobbyking/s...idProduct=4853

I like the TP 9 3.8 prop because they don't break when you land without landing gear.
Aug 22, 2010, 07:25 PM
Registered User
flyelectcl's Avatar
Thanks for the info, I like that motor, just got one and have test run it but not had it in the air yet. Looks very good so far.
Aug 25, 2010, 11:53 AM
Fly Low Fly Fast Fly Often
jjr2001's Avatar

Ugglan uav


I did not see this one listed here yet so here it is.

Looks like a good AP slow flyer yet it is quite maneuverable.


https://www.rcgroups.com/forums/show....php?t=1019466
Aug 26, 2010, 11:16 AM
Trolls more than he flys.
Gringostr's Avatar

Yak 55M 36" by Gringostr(me)


Here is a Yak I designed, it flies pretty good, and its a work in progress. it'd be great if i could get someone else to help me trim it and make it fly great.
I dont have pics or vid yet, but ill try to get some up soon.
Thanks,
Gringo
Last edited by Gringostr; Jun 21, 2011 at 12:41 PM.
Aug 27, 2010, 12:53 PM
Can't fail if u don't try...

spirit of st-louis


Hi everyone I've been looking thruout this hole thread and i canot find what i'am looking for, wich is some kind of plan for the Spirit of st-louis airplane something around 30" WS and up
any help would be appreciated.
P.S. free plan if possible foam or balsa no matter...
Thank you
Roy


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert Free Plans for Foamies (Post links here) JAM Foamies (Kits) 41 Apr 03, 2020 05:58 AM
Question Ideas & plans for 36 scratchbuilt sport plane? cam777cam Sport Planes 40 Apr 12, 2007 05:27 PM
Great free plans for foamies... NetForce2K Foamies (Kits) 5 Apr 28, 2003 04:02 PM
Plans for Fan-Fold-Foamies? ForeverFlying Foamies (Kits) 1 Oct 04, 2002 07:31 PM
Plans for Messerschmitt bf110 from Flair bibblebum Electric Plane Talk 3 Jul 31, 2001 01:23 PM