CNC News April 08 - RC Groups
Thread Tools
This thread is privately moderated by rich56ia, who may elect to delete unwanted replies.
Apr 16, 2008, 01:42 PM
Registered User

CNC News April 08

BIL's been working with router and a program that cuts faces out from a BMP picture. While cutting it seemed to loss its settings for 0 and by the end it was 1/2" out alignment. After some fiddling and checking he figured out that the picture program was asking it to cut it at a high resolution that the machine isn't capable of which is .05. After reseting everything and getting the resolution down to .05 seemed to work fine.

3-15-08 Installed limit switchs and BIL is making up a hold down system that should cover the whole area and any size materal.

04-15-08 Recieved lumber for a shed to house the router and started layout but with a small yard and the set backs requied by code biggest it can be is 14'X12'.
Will be a slow build as Im disabled and need alot of help getting it built but with the help of family and friends should be in it by winter 08.
Thanks All
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Wanted - Model Airplane News April 1989 Hughes500Pilot Aircraft - General - Miscellaneous (FS/W) 0 May 22, 2007 11:35 AM