BladeXL - RC Groups
Thread Tools
This thread is privately moderated by RobinBennett, who may elect to delete unwanted replies.
Apr 15, 2008, 04:24 PM
Sussex, UK
RobinBennett's Avatar


I've wanted one of these for years but recently had a chance to try one, which made up my mind (that, plus the cheap motors, ESCs and batteries at HobbyCity). The new graphics are a big improvement over the old random squares too.

BladeXL thread

I went for:
* GWS Micro 2BBMG Metal Geared Servo (x4)
* Turnigy 42-50A 700kv outrunner
* Turnigy 80A ESC (probably bigger than I'll need, but it's got a UBEC)
* Two 3s2200mAh batteries in parallel.
* APC 16x8 thin electric prop
* AR7000
* 110mm wheels

This set up hovers at half throttle and only uses half the pack in a 10 minute flight.
Last edited by RobinBennett; May 26, 2008 at 04:33 PM.
Sign up now
to remove ads between posts

Thread Tools