Thread Tools
Old Apr 10, 2008, 09:04 AM
turnbui is offline
Find More Posts by turnbui
Registered User
turnbui's Avatar
Discussion

What a very very very nice man - Rx woes on HBK2 FYI:


I normally turn on my Tx and leave it 3 or 4 foot away whilst I go power up the heli.
I had a great flight the previous day and put the heli away. This morning I took it out to fly and it went berserk when I tried to pick up the Tx. So luckily no damage. I took off the blades and went up to my room to see if I could find out what was going on. No I couldn't. I took it to Sussex Model shop and Paul said "Wow! That's a first". He tried a new aerial as it was loose at the top end, no joy. Then he gave me a budget Rx and asked me to try it. Problem solved. So for 15 he gave me this Fusion PPM/FM 6CH Rx and all appears well. I had noticed a sound from one of the servo's which has now gone. So whether it was indicative of my failing E-sky stock Rx I don't know.
Sign up now
to remove ads between posts
Old Apr 10, 2008, 11:21 AM
turnbui is offline
Find More Posts by turnbui
Registered User
turnbui's Avatar
Thought I'd add that an earlier post where I reported a problem with my Tx actually turned out to be the Rx on its way out! So now I have 2 0406A Tx's. Ha!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! What's the easiest way to change the belt on HBK2? bmmeup Micro Helis 3 Nov 02, 2007 11:28 PM
Antenna Woes on cheap RX MrBlenny Slope 32 May 02, 2005 02:20 PM
Very cheap new GWS motors on ebay. DXA type. reznikvova Aircraft - Electric - Airplanes (FS/W) 8 Oct 10, 2003 10:48 PM
What's up with the MPI Pico RX? Red Baron 47 Electric Plane Talk 0 Sep 08, 2001 08:57 AM