New Products Flash Sale
Thread Tools
Old May 23, 2008, 07:19 AM
6-mins is offline
Find More Posts by 6-mins
Registered User
is this a good prop and motor to go in the guppy.
http://www.hobby-lobby.com/speed400.htm - 400speed, says it has a 2.3mm shaft diameter.
https://www.hobbycity.com/hobbycity/...peller_6x4inch - closest thing to the recomended 5X4 for the motor above, anyone know if this will fit on the shaft.
Sign up now
to remove ads between posts
Old May 23, 2008, 12:09 PM
CANTZ506 is offline
Find More Posts by CANTZ506
Registered User
CANTZ506's Avatar
Quote:
Originally Posted by 6-mins
is this a good prop and motor to go in the guppy.
http://www.hobby-lobby.com/speed400.htm - 400speed, says it has a 2.3mm shaft diameter.
https://www.hobbycity.com/hobbycity/...peller_6x4inch - closest thing to the recomended 5X4 for the motor above, anyone know if this will fit on the shaft.
If you read the comments below the propeller's image, (french and spanish) you find the answer: DO NOT BUY IT!
Old May 24, 2008, 02:30 AM
6-mins is offline
Find More Posts by 6-mins
Registered User
how bout this, https://www.hobbycity.com/hobbycity/...oy_hub_-_6.5x4
and what do you think of the motor?
Old May 24, 2008, 05:23 AM
CANTZ506 is offline
Find More Posts by CANTZ506
Registered User
CANTZ506's Avatar
Quote:
Originally Posted by 6-mins
how bout this, https://www.hobbycity.com/hobbycity/...oy_hub_-_6.5x4
and what do you think of the motor?
Sure this 'seems' better, but I can't say nothing about quality.
But I'm not sure about its size: 6.5x4 seems too big for that motor; I'm afraid it will suffer a bit.
It's better to ask people who have already flown Guppy, or READ the whole part#1 thread!
Old May 24, 2008, 06:19 AM
mifi is offline
Find More Posts by mifi
Registered User
For Guppy and speed 400 you should use 6 X 3 folding prop. That is the Law
Old May 24, 2008, 03:28 PM
ultralajt is offline
Find More Posts by ultralajt
Registered User
ultralajt's Avatar
Quote:
Originally Posted by 6-mins
how bout this, https://www.hobbycity.com/hobbycity/...oy_hub_-_6.5x4
and what do you think of the motor?
Compared to Garupner Cam prop, or AeroNaut folder, this HK prop is very thick. Its airfoil is very fat. So he eat a lot of power.

I saw that prop and I think is not suitable.
Old May 24, 2008, 03:46 PM
lubak is offline
Find More Posts by lubak
Registered User
lubak's Avatar
I changed Speed 400 motor with this Turnigy 28-26 1650Kv with 6x3 Graupner prop and 1300 mAh 3S Lipoly and Guppy now flight wonderfully
Old May 28, 2008, 07:00 AM
ultralajt is offline
Find More Posts by ultralajt
Registered User
ultralajt's Avatar
Hi all!!

I came across an idea, that would be usefull if I made another set of plans for the Guppy.

This Guppy (Mark 2 ) will incorporate all features, that were shown as good options or modifications in the past, as some builders use it while assembly their own Guppies.

Of course, the general outlook of the model will remain the same.

So the newest Guppy will have:

- better airfoil
- thin ply reinforcment members in the fuselage
- middle wing joiner (optional)
- a little bit longer nose part of the fuselage
- front end redesigned for use of brushless motors
- wing optional with or without ailerons
- ply reinforcements at wing dihedral points
- alternative way of controling tail. Pull-pull system with string.
- list of apropriate (and affordable) propulsion systems from UH http://www.hobbycity.com?cda=21131

So much for now from UL-Design Headquarters

Mitja
Old May 28, 2008, 07:20 AM
jh2rc97 is offline
Find More Posts by jh2rc97
Registered User
100"?

Quote:
Originally Posted by ultralajt
Hi all!!

I came across an idea, that would be usefull if I made another set of plans for the Guppy.

This Guppy (Mark 2 ) will incorporate all features, that were shown as good options or modifications in the past, as some builders use it while assembly their own Guppies.

Of course, the general outlook of the model will remain the same.

So the newest Guppy will have:

- better airfoil
- thin ply reinforcment members in the fuselage
- middle wing joiner (optional)
- a little bit longer nose part of the fuselage
- front end redesigned for use of brushless motors
- wing optional with or without ailerons
- ply reinforcements at wing dihedral points
- alternative way of controling tail. Pull-pull system with string.
- list of apropriate (and affordable) propulsion systems from UH http://www.hobbycity.com?cda=21131

So much for now from UL-Design Headquarters

Mitja
Old May 28, 2008, 08:56 AM
CANTZ506 is offline
Find More Posts by CANTZ506
Registered User
CANTZ506's Avatar
Quote:
Originally Posted by ultralajt
Hi all!!

I came across an idea, that would be usefull if I made another set of plans for the Guppy.
Very good!

This Guppy (Mark 2 ) will incorporate all features, that were shown as good options or modifications in the past, as some builders use it while assembly their own Guppies.

Of course, the general outlook of the model will remain the same.

So the newest Guppy will have:

- better airfoil Which?
- thin ply reinforcment members in the fuselage
- middle wing joiner (optional) Two pieces wing (hotliner), three pieces (normal)
- a little bit longer nose part of the fuselage
- front end redesigned for use of brushless motors
- wing optional with or without ailerons
- ply reinforcements at wing dihedral points
- alternative way of controling tail. Pull-pull system with string.
- list of apropriate (and affordable) propulsion systems from UH http://www.hobbycity.com?cda=21131

So much for now from UL-Design Headquarters

Mitja
Before you start drawings, may I suggest a 86" wing span (2.2mt)?
Old May 28, 2008, 08:57 AM
3810 is offline
Find More Posts by 3810
Registered User
3810's Avatar
Mitja,
Having built the standard Guppy,I look forward to seeing Guppy MK2

3810
Old May 28, 2008, 02:14 PM
kr3cik is offline
Find More Posts by kr3cik
Registered User
kr3cik's Avatar
Better airfoill...?? MU or difrent
Last edited by kr3cik; May 29, 2008 at 03:50 AM.
Old May 28, 2008, 02:40 PM
Jack Stephens is offline
Find More Posts by Jack Stephens
Gadsden RC Flyers
Jack Stephens's Avatar

Guppy Wingtip Suggestion


Mitja,

Since you are planning to change your Guppy plan, I would like to show you a change that I made to mine. The Guppy wingtip is a lovely design, but the detailed carving on the front portion of the wingtips (Photo 1) would have been very difficult for me to duplicate.

To make the wingtips easier for me to build, I terminated the spars and D-Box sheeting on a new tip rib, then glued the wingtip block to that. Section MM on the wing plan provides an exact pattern for new tip ribs, requiring only trimming off the ends to match up with the leading and trailing edges. Photo 2 shows the tip plan and Section MM, and Photo 3 shows the new tip rib patterns ready to cut from 1/8” balsa.

Photo 4 shows a tip rib trimmed to length and glued into place, and Photo 5 shows a wingtip block glued on. In Photo 6 the wingtips are rough shaped and rough sanded. I also moved the triangular leading edge gusset back to the spar/tip rib joint.

My version is not as strong as your wingtip design, but this change made the building task much easier for old fingers. The only additional material required was for the two new 1/8” balsa tip ribs.

For what it is worth,

Jack Stephens
Old May 28, 2008, 04:49 PM
SuperSushi is offline
Find More Posts by SuperSushi
Registered User
Thanks for sharing the plans and the Design for that great looking and as it seems to me also great flying plane! I want to build one for a friend of mine. He goes to india for 4 months and I plan to give him the plane when he is back arrived. He flys only foamies at the moment because his opinion is, wooden planes crash through the smallest mistake a pilot can do. I don't know if this sentence was understandable, I'm from Germany. The thing is, he would never buy or build a wooden plane and I want him to fly something 'real', so i must build one for him
My question is: How long will it take for MkII to come? If that would happen soon, of course I would build MkII then. otherwise, if it comes in 4 months, I will have to build the current version.

So long, Björn.

[edit] If there's someone from Germany here, do you know where to get that PU-glue? Never heard of it so far.
Old May 29, 2008, 01:14 AM
ultralajt is offline
Find More Posts by ultralajt
Registered User
ultralajt's Avatar
AAA!

What a pleasent respont to my newly idea!

Mark 2 will be the same size as original Guppy.

The larger Guppy will be of 100" or 2,54m wingspan...and it will came after Mk2.

Thanks guys for suggestions! I will use them in concern as they proved themself as worth to use.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log GUPPY electric sailplane Building&flying PART 1 ultralajt Electric Sailplanes 1129 Apr 26, 2016 02:43 PM
RadicalRC Microstick Building & Flying part 2 Earthbound Parkflyers 432 Jul 18, 2008 11:01 AM
Unicorn Wing Building Process - Part 2! tim hooper Foamies (Kits) 59 Oct 27, 2005 09:41 AM
Stevens Aero Stella: Building Thread (part 2) doc-e 3D Flying 543 Dec 22, 2004 07:58 PM
Banchee E-3D - Building and Flying, Part 2 Harley Sport Planes 499 Dec 10, 2004 01:46 PM