New Products Flash Sale
Thread Tools
Old Jul 30, 2009, 11:40 AM
kr3cik is offline
Find More Posts by kr3cik
Registered User
kr3cik's Avatar
Mr. Quanty!!

Ther is Guppy plan tailed on A4 if you send me your e-mail on PM I will send you back this plan
Sign up now
to remove ads between posts
Old Jul 30, 2009, 11:41 AM
Quanty is offline
Find More Posts by Quanty
Registered User
Thanx^^
I wrote the questions to him, I just hope he answers I think tomorrow I'll buy the balse, but i don't know how much of which?
Old Jul 30, 2009, 12:27 PM
Riverratss is offline
Find More Posts by Riverratss
Circa:1946
Riverratss's Avatar

Guppy MKll Thread!!!!!!!!!


Quote:
Originally Posted by Riverratss
Mr. Quanty!!


These sites should answer your questions!!!

http://ultralajt.webs.com/index.htm

http://rcgroups.com/forums/showthread.php?t=996029

Have a good day!!!
Jimmy
Herr Quanty!

Go to the 2nd url above for the Guppy MKll thread, and look for post #84 by Mitja!!! It's a complete material list!!!!!!!!!!!!!!!!!!!!! Adobe format!!!

My chainsaw is calling!!!!
Jimmy
Old Jul 30, 2009, 12:31 PM
Riverratss is offline
Find More Posts by Riverratss
Circa:1946
Riverratss's Avatar

Guppy MKll!!


Quote:
Originally Posted by Quanty
Thanx^^
I wrote the questions to him, I just hope he answers I think tomorrow I'll buy the balse, but i don't know how much of which?

Herr Quanty!!

Take my word for it, he will answer! Right away, if he is home!!

Back to my Chainsaw!!
Jimmy
Old Jul 30, 2009, 12:56 PM
Quanty is offline
Find More Posts by Quanty
Registered User
@ Mister Riverratss :-)

Thanks^^
But I want to build the Guppy version #1?
Or is it the same material list!?
Old Jul 31, 2009, 06:58 AM
dennymaize is offline
Find More Posts by dennymaize
Registered User
Hi Ladies

Just opened my e-mail to a ton of mails about the guppy. Will answer today. Sorry for any delays, I have been in Mincie IN Had to CD Hand Launch and A-sailplane at the NATS. Just got back late last night, will come to life today and tomorrow.
Old Jul 31, 2009, 07:34 AM
Quanty is offline
Find More Posts by Quanty
Registered User
Hey Guys^^
It's me again...
I want to ask whioch sort of balsa i should use?
hard, soft, middle?

Thx for reply :-)

edit:
another question again :-D

As I heard this is the full plan of what is needed of balsa.
But in this template, there are missing some parts..and also there is meantioned, that " Lenght may varry from template"...so, what to do?

Thx fo replys again :-)
Last edited by Quanty; Jul 31, 2009 at 09:57 AM.
Old Aug 01, 2009, 05:35 AM
ultralajt is offline
Find More Posts by ultralajt
Registered User
ultralajt's Avatar
Quote:
Originally Posted by Quanty
Hey Guys^^
It's me again...
I want to ask whioch sort of balsa i should use?
hard, soft, middle?

Thx for reply :-)

edit:
another question again :-D

As I heard this is the full plan of what is needed of balsa.
But in this template, there are missing some parts..and also there is meantioned, that " Lenght may varry from template"...so, what to do?

Thx fo replys again :-)
Hi!

Please use a plan drawings of Guppy(1) for building and assembling Guppy.
Those two files you ask about, was made just as addition to the original plans.

Indeed some parts on the template plans are missing, so use original plan to make them.

Mitja
Last edited by ultralajt; Aug 01, 2009 at 06:20 AM.
Old Aug 01, 2009, 06:13 AM
Quanty is offline
Find More Posts by Quanty
Registered User
Okay , thank you a lot
How thrilling, the master himself answered

The list how much balsa I need here is up-to-date?
Old Aug 07, 2009, 03:57 PM
Quanty is offline
Find More Posts by Quanty
Registered User
I'm just translating the Manual into german and I'll post here
But I have another question, or a few^^
1) is it important what I buy? hard or soft..I just can buy "normal balsa"...
2) The spar webs...where they have to be? Also in the triangular wing?
3)what do I need? whichs servos etc...?
Old Aug 17, 2009, 01:52 PM
diozxlive is offline
Find More Posts by diozxlive
Registered User
whats the best way to drill/make the holes in the elevator?
Old Aug 17, 2009, 02:15 PM
CANTZ506 is offline
Find More Posts by CANTZ506
Registered User
CANTZ506's Avatar
Quote:
Originally Posted by diozxlive
whats the best way to drill/make the holes in the elevator?
This or this other and at last also this, after a circle of holes made with a drill bit!
Old Aug 21, 2009, 08:59 AM
Lucky_Luke_02 is offline
Find More Posts by Lucky_Luke_02
Registered User

Imperial wood size?


Hi,

I have the guppy plan lying in my workshop since a year.
And now it's finally the time to built it!...

I have only one question before building it. since the plans are metric and the balsa available here is imperial. I was wondering what size of wood other have use?

My guess for the best match would be:

1mm = 1/32
it's a little smaller. Is it going to be strong enough for the wing sheeting?

2mm = 1/16
3mm = 1/8
6mm = 1/4

What other have used?

Thanks

Luc
Old Aug 21, 2009, 12:25 PM
sodekirk is offline
Find More Posts by sodekirk
Registered User
sodekirk's Avatar
Here is a link I posted in the Guppy MK 2 thread.
http://www.globaljewelry.com/mm2inchconverter.htm
Old Aug 21, 2009, 01:33 PM
Lucky_Luke_02 is offline
Find More Posts by Lucky_Luke_02
Registered User
Thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log GUPPY electric sailplane Building&flying PART 1 ultralajt Electric Sailplanes 1129 Apr 26, 2016 02:43 PM
RadicalRC Microstick Building & Flying part 2 Earthbound Parkflyers 432 Jul 18, 2008 11:01 AM
Unicorn Wing Building Process - Part 2! tim hooper Foamies (Kits) 59 Oct 27, 2005 09:41 AM
Stevens Aero Stella: Building Thread (part 2) doc-e 3D Flying 543 Dec 22, 2004 07:58 PM
Banchee E-3D - Building and Flying, Part 2 Harley Sport Planes 499 Dec 10, 2004 01:46 PM