parkzone trojan t-28 esc - RC Groups
Thread Tools
Apr 05, 2008, 08:29 PM
Registered User
Discussion

parkzone trojan t-28 esc


hey guys,

im thinkink of buyin the parkzone trojan t-28 in the next week or so. been reading a couple of threads about it for a couple of weeks, sounds like a nice bird. i also have a supercub

ive a couple of quiestions,

im gona change the esc 1st just wondering has anybody heard of these esc's and are they any gud?

Duremax 25 Amp Brushless

http://www.modelmaniacsonline.co.uk/...5337&CatID=303

TowerPro W30A Brushless Speed Controller

http://www.islandmodels.ie/component...art/Itemid,27/

TURNIGY Plush 25amp Speed Controller

http://www.islandmodels.ie/component...art/Itemid,27/


has anyone any ideas, i really new to electrics,

are any of them any good?
which would ya reccomend and why?
would ya reccomend any of them?

plus do i need to get any thing else for this set-up?

thanks guys for any info,

keith
Sign up now
to remove ads between posts
Apr 05, 2008, 09:27 PM
raz
raz
Sportin my new 'do'
raz's Avatar
I have a friend that uses the Tower Pro esc's and he claims he has not had a bad one yet and he's been using them for a while now in about 8 different planes. You are going to love the T-28, it's a great 2nd plane.
Apr 05, 2008, 10:03 PM
Xpress..'s Avatar
Well, if you want a good ESC, then I recommend a Castle Creations Thunderbird 36. Castle Creations speed controlls are high quality, and work very well each time you power up. Plus I like the tone they make while arming up. The Thunderbird controllers may not have as many programming features as the Phoenix line, but they work very well.

http://www3.towerhobbies.com/cgi-bin...?&I=LXUTB1&P=7

I'd put Castle Creations above all speed controlls out there. A bit pricy, but worth every penny.
Apr 06, 2008, 09:07 AM
Registered User
thanks lads for the quick reply, any ideas on the TURNIGY Plush esc?
cant wait to get my hands on the t-28, been reading sum great stuff about it
Apr 06, 2008, 01:55 PM
Member 120mph Club
ATIS's Avatar
Keithn4....not all the issue with the T-28 is from the ESC.... the issue is that the ESC was designed to operate only 1 digital servo and PZ install 2 digital servos. Those 2 digitial and the other 2 servos are working the BEC to death...literially. I am running the EFLite 25 pro ESC on mine (still) with a EFLITe 480 (1020kv) motor. I switched out my rudder servo to a standard servo....my motor died during a flight which is why a replaced/upgraded it.

Things I would do:

1) replace rudder servo to HS65MG
2) Change battery connectors to Deans
3) Remove the ESC from the foam nad use double sided tape to mount it so its not "buried" in the foam (which holds in heat)
Apr 06, 2008, 02:37 PM
Registered User
Do you really need a metal gear servo??
Apr 06, 2008, 04:45 PM
Registered User
Quote:
Originally Posted by ATIS
Keithn4....not all the issue with the T-28 is from the ESC.... the issue is that the ESC was designed to operate only 1 digital servo and PZ install 2 digital servos. Those 2 digitial and the other 2 servos are working the BEC to death...literially. I am running the EFLite 25 pro ESC on mine (still) with a EFLITe 480 (1020kv) motor. I switched out my rudder servo to a standard servo....my motor died during a flight which is why a replaced/upgraded it.

Things I would do:

1) replace rudder servo to HS65MG
2) Change battery connectors to Deans
3) Remove the ESC from the foam nad use double sided tape to mount it so its not "buried" in the foam (which holds in heat)
could ya use the HS55 servo?

what size props do ya use, would a 10x8 work? i have a few from my super cub?
Apr 06, 2008, 05:10 PM
Registered User
The stock bird (960kv motor) comes with 9.5 x 7.5 props
Apr 06, 2008, 09:26 PM
Member 120mph Club
ATIS's Avatar
HS55 is too small....the HS85 or HS65 works...MG is not a requirement...

I am using the stock prop...but on the stock motor is a little weak for the claimed 960kv....when mine died during a flight I replaced it with the EFlite 480 (1020kv)...I have had great experience with that motor on APC 10x7 E and APC 11x5.5 E props (Estarter, Eflite P-47, PZ Spitfire, Typhoon 3d)
Apr 06, 2008, 09:32 PM
Registered User
Good info - thanks!
Apr 06, 2008, 09:41 PM
LET'S GO PENS
JDOUBLEYOU's Avatar
has anyone still had issues with the plane after they replace a digital servo or added an extra BEC? Is it a sure fix or can there still be issues?
Apr 07, 2008, 07:11 AM
Member 120mph Club
ATIS's Avatar
I replaced the stock ESC (after it smoked with another EFlite 25) and 1 digital servo with the HS65MG and have not had an issue since... and I fly WOT the entire flight and treat her like a 3d plane... always doing loops, inverted, rolls, and combos....so I am always working the servos... and I did NOT add a BEC... the BEC is only needed if you want to keep the two digital servo in her.
Apr 07, 2008, 09:26 AM
Registered User
I noticed Dimension Engineering's BEC do not appear suitable for the BEC change out. Any other ideas?
Apr 08, 2008, 06:51 AM
Member 120mph Club
ATIS's Avatar
If you are going the seperate BEC route....CC BEC towerhobbies.com
Apr 08, 2008, 09:43 AM
Registered User
Thx! http://www.castlecreations.com/products/cc_bec.html# Note to Spektrum users; check the advisory. I like CC stuff - have lots of it.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article ParkZone T-28 Trojan RTF Review Jim Walker Electric Warbirds 893 Oct 31, 2016 01:25 AM
Help! Stop Me From Buying a Parkzone Trojan T-28! IPFlyer Foamies (Kits) 18 May 16, 2009 06:39 AM
Discussion Parkzone T-28 Trojan Thread Edge767 Parkflyers 6527 Jun 04, 2008 06:29 AM
Sold Parkzone 480, 960kv motor for trojan t-28 la528it Aircraft - Electric - Power Systems (FS/W) 10 Apr 02, 2008 04:32 PM
Discussion Planning ahead: replacement Rx for PZ Trojan T-28 kelstertx Electric Plane Talk 2 Jan 05, 2008 12:55 PM