Thread Tools
Aug 03, 2012, 01:49 PM
jrb
jrb
Member
jrb's Avatar
FYI: both the Linear & Switching Radio Shack PS have an output ripple spec of 150 mV RMS.
Sign up now
to remove ads between posts
Aug 03, 2012, 04:01 PM
Registered User
choopi's Avatar
Just a quick question, I got a 106b+ and when I charge 6s 4000-5000mah (big pack) after the pack are charged, I checked the individual cell for voltage, this what I'm getting
1-4.19
2-4.19
3-4.19
4- 4.15
5-4.29
6-3.99
this is an average voltage but usually 5-6 are the strange voltage. Is this normal? My pack are still in good shape, average 20 cycles each.
Aug 03, 2012, 04:09 PM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
Quote:
Originally Posted by choopi
Just a quick question, I got a 106b+ and when I charge 6s 4000-5000mah (big pack) after the pack are charged, I checked the individual cell for voltage, this what I'm getting
1-4.19
2-4.19
3-4.19
4- 4.15
5-4.29
6-3.99
this is an average voltage but usually 5-6 are the strange voltage. Is this normal? My pack are still in good shape, average 20 cycles each.
What are you using to check? If a cell checker, only take the first cell, then remove, and shift up, from ground to 6S. Hope that makes sense. Otherwise, try a DVM and see if your measurements are consistent.
Aug 03, 2012, 04:22 PM
Registered User
choopi's Avatar
Quote:
Originally Posted by N6145k
What are you using to check? If a cell checker, only take the first cell, then remove, and shift up, from ground to 6S. Hope that makes sense. Otherwise, try a DVM and see if your measurements are consistent.
I checked on the charger itself, and it closer to 4.19 to each cell! I was using this:
http://www.hobbyking.com/hobbyking/s...itor_2_6S.html
and this:
http://www.hobbyking.com/hobbyking/s...Analyzer_.html

Not so accurate I guess!
Aug 04, 2012, 09:44 AM
Registered User
Quote:
Originally Posted by choopi
I checked on the charger itself, and it closer to 4.19 to each cell! I was using this:
http://www.hobbyking.com/hobbyking/s...itor_2_6S.html
and this:
http://www.hobbyking.com/hobbyking/s...Analyzer_.html

Not so accurate I guess!
Did you read the description on your first link? Right on the page it says:
Quote:
This item is not accurate enough for precise cell balance checking. It is to be used to check battery charge status.
Lol they know what they are selling is crap.
Aug 04, 2012, 11:04 AM
Registered User
Quote:
Originally Posted by choopi
I checked on the charger itself, and it closer to 4.19 to each cell! I was using this:
http://www.hobbyking.com/hobbyking/s...itor_2_6S.html
and this:
http://www.hobbyking.com/hobbyking/s...Analyzer_.html!
Did you get the same result on both? If so, you should check with a DVM on each cell and compare with the voltages displayed on the charger. Sometimes chargers needs to be recalibrated.

Fred.
Aug 04, 2012, 06:27 PM
Registered User
choopi's Avatar
Quote:
Originally Posted by flarssen
Did you get the same result on both? If so, you should check with a DVM on each cell and compare with the voltages displayed on the charger. Sometimes chargers needs to be recalibrated.

Fred.

It's all good! It was the bat checker from Hk! False alert!
Aug 05, 2012, 10:05 PM
Team Hillbilly 🐘💨
bullittjeff's Avatar
Finally got a 306b from ep buddy and couldn't be happier. The balancing is awesome and precise. Nothing but good things to say here
Aug 05, 2012, 10:32 PM
Just fly
evltoy's Avatar
Hi All

I'm currently lookng at a new PSU as I just blew up my trusty 23A 300w unit.

Was looking on the progressiveRC site and found the PRC500 unit that could fit my bill.

Can this unit handle 2x 106B+ chargers each charging 6S@10A?

Cheers
Aug 05, 2012, 10:40 PM
RC Helicopter Pilot
TheWoodCrafter's Avatar
Not quite.
It says a 6S at 17AMPS.
I would think 2 chargers would be half that each.
About 8.5AMPS each charger.
Aug 05, 2012, 10:50 PM
Just fly
evltoy's Avatar
Thats what I thought. I did read that too but just wanted to ask the question as the chargers can only do a max of 250w at 13.5v

I wonder what its max watt/A is at 13.5v
Aug 05, 2012, 11:04 PM
Registered User
250 watts max. when input voltage >13.5V

Excerpt from manual:
Aug 05, 2012, 11:09 PM
Just fly
evltoy's Avatar
Sorry I meant

I wonder what its max watt/A is at 13.5v of the PRC500 unit

I think I have worked it out
Max A is 33A or 500W

So at 13.5 x 33A = 445W
And At 15v x 33A = 500W
Aug 05, 2012, 11:15 PM
Registered User
Ahhh, gotcha. Sorry about that.

I was under the impression that the PRC500 had output voltage fixed at 15V but I could be mistaken.

Mark
Aug 05, 2012, 11:21 PM
Just fly
evltoy's Avatar
Mark -I never thought about the fix voltage on the PRC500! Sounds like this may not suit me.

If anyone has the time can they comment on this PSU and tell me if this would fit my needs.
http://www.radioparts.com.au/ProdVie...C+POWER+SUPPLY


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Best charger/discharger $ can buy namancio Batteries and Chargers 30 Jan 31, 2010 02:52 PM
Power Pacer Battery charger/discharger ACE_McCOOL Batteries and Chargers 4 Oct 22, 2002 12:39 PM
NIB Hitec CG-325 Charger/Discharger/Cycler for 4-9 cells - $39! Jason M Aircraft - Electric - Airplanes (FS/W) 0 Oct 03, 2002 03:29 AM
WTB Good charger/discharger 10 + cells WickedFunRC Aircraft - Electric - Airplanes (FS/W) 0 Sep 05, 2002 08:55 PM