Thread Tools
Old Jun 22, 2008, 09:50 PM
junsi is offline
Find More Posts by junsi
iCharger
junsi's Avatar
Quote:
Originally Posted by skyboyken
Hi Junsi,

I notice you are saying nice things about recent software change suggestions, but making no commitments to implement, nor giving any timeframes.

So let me ask you please, do you have any intention of implementing Julez' and my suggestion to do a foam cutting bow driver mode, and if so when?

Ken.
Hello Ken,
Thanks for you remindness!
now, we have implement this foam cutting driver mode to Version 3.05, we will release its update later!
Thanks,
Junsi
Sign up now
to remove ads between posts
Old Jun 22, 2008, 09:54 PM
junsi is offline
Find More Posts by junsi
iCharger
junsi's Avatar
Quote:
Originally Posted by Julez
Well, I just had a closer look at the manual, and I noticed that the motor break-in feature is almost the same as the foam cutting feature.
Not as convenient, but the following should work:

Just connect a cutting wire instead of the motor, set the amp to 4A, and slowly work your way up at the voltage setting, until you have the desired wire temperature.
The max. voltage of 15V would limit the wire length to 0.6m, though, at least with the type of wire I use.

Junsi, concerning the manual:
At the program flow chart, how about putting little numbers under each display image, which refer to the page number of the manual, where this feature is described in detail?

For example, put a "18" under the PB charge display images, so one would see directly, that one has to go to page 18 in the manual to find the explanations.

Cheers,

Julez
Hello Julez,
Thanks!
As for the putting little numbers under each display image , We just misundestood your meaning , we will add the page number to the under images of flow chart.Thanks!
We really appreciate this valuable idea, it's really a convenient way.

Thanks,
Junsi
Last edited by junsi; Jun 22, 2008 at 10:25 PM.
Old Jun 22, 2008, 10:07 PM
kgfly is offline
Find More Posts by kgfly
Registered User
Junsi I think you might have misunderstood Julez's suggestion. I think he just meant that in the manual you could place a little page number reference below each drawing of the LCD in the flowchart.
Old Jun 22, 2008, 10:27 PM
junsi is offline
Find More Posts by junsi
iCharger
junsi's Avatar
Quote:
Originally Posted by kgfly
Junsi I think you might have misunderstood Julez's suggestion. I think he just meant that in the manual you could place a little page number reference below each drawing of the LCD in the flowchart.
Hello Kgfly,
A thousand thanks!
Language barrier!
Thanks for your explanation!

Regards,
Junsi
Old Jun 23, 2008, 03:39 AM
KegRaider is offline
Find More Posts by KegRaider
Registered User
Hi guys,

I got to page 22 and realized that I NEED this charger Ordered from HC, and eagerly await it's arrival! Should replace my DN Power and iMax B6 just nicely

Any idea on what firmware is on the ones stocked at HC? Not that it matters, as i bought a TTL board from futurelec anyway

-->KegRaider.
Old Jun 23, 2008, 05:33 AM
skyboyken is offline
Find More Posts by skyboyken
I do this for fun!
Thanks Junsi,

i was hoping you would say that .

Ken.
Old Jun 23, 2008, 10:18 AM
blanchjd is offline
Find More Posts by blanchjd
Registered User
Foam Cutting mode in upcoming 3.05? Wow this thing just keeps getting better and better. Now I really need to finish my RS232 to TTL converter.

-Jeff
Old Jun 24, 2008, 06:03 AM
junsi is offline
Find More Posts by junsi
iCharger
junsi's Avatar

News!!!


Hello Everybody,
After assimilating your guys’ valuable suggestions, now the new version 3.05 come into being.
As usual, there are some new functions added and modifications. Please see detail information in attachment: update information
And updated user manual: http://www.jun-si.com/UploadFiles/iCharger-english.pdf.

Regards,
Junsi
Last edited by junsi; Jun 24, 2008 at 06:17 AM.
Old Jun 24, 2008, 06:29 AM
ivanhoes is offline
Find More Posts by ivanhoes
Registered User
Junsi,

just a short question. Will HC get the 106B back in stock this week?
Old Jun 24, 2008, 11:39 AM
write2dgray is offline
Find More Posts by write2dgray
write2dgray's Avatar
Rock on Junsi - nice list of updates in the release notes and I love how credit is given to the originator. This soon to be legendary series of chargers is destined to become the model that others mimic and aspire to be, given this level of direct and immediate user feedback.

Manufacturer/engineer direct to consumer/hobbyist - isn't it wonderful!
Site Sponsor
Old Jun 24, 2008, 11:43 AM
Julez is offline
Find More Posts by Julez
Proud to eat Kraut ;-)
Julez's Avatar
Junsi,

The foam cut mode looks absolutely beautiful in the manual!
Thanks for incorporating it, a huge benefit for the DIY foam enthusiast!
Old Jun 24, 2008, 11:48 AM
write2dgray is offline
Find More Posts by write2dgray
write2dgray's Avatar
I can almost smell the foam burning - mmmmm-mmmmm! The first charger with integrated foam cut mode, I believe you can take some credit for that one too Julian.
Site Sponsor
Old Jun 24, 2008, 12:25 PM
Julez is offline
Find More Posts by Julez
Proud to eat Kraut ;-)
Julez's Avatar
Hm, thanks

*Cough* - I prefer wearing a gas mask while cutting

Anyhow, I wonder why noone has thought earlier of this. A computer charger can do everything a normal foam cutting power supply can do, too, only better.
Last edited by Julez; Jun 24, 2008 at 12:59 PM.
Old Jun 24, 2008, 12:33 PM
not.likely is offline
Find More Posts by not.likely
Registered User

Updating port ?


I already have the 1010b but what is the little USB port for on the side? Is it possible or necessary to update the charger with latest software or what? I am a little confused, as there are a lot of things which seem to have been incorporated into it since its first release, and these seem to keep occuring almost daily - but how will I know whether these are active in my particular model. It says ver3.04. when first booting up, and the manual is on a disk which came with it. TYIA
Last edited by not.likely; Jun 24, 2008 at 05:41 PM.
Old Jun 24, 2008, 12:48 PM
Julez is offline
Find More Posts by Julez
Proud to eat Kraut ;-)
Julez's Avatar
The punch out for the USB port is intended for future versions.

You can update the charger with a little soldering and a USB / TTL converter.
Instructions are here, and in some other postings:

https://www.rcgroups.com/forums/show...08#post9767208


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Best charger/discharger $ can buy namancio Batteries and Chargers 30 Jan 31, 2010 03:52 PM
Power Pacer Battery charger/discharger ACE_McCOOL Batteries and Chargers 4 Oct 22, 2002 01:39 PM
NIB Hitec CG-325 Charger/Discharger/Cycler for 4-9 cells - $39! Jason M Aircraft - Electric - Airplanes (FS/W) 0 Oct 03, 2002 04:29 AM
WTB Good charger/discharger 10 + cells WickedFunRC Aircraft - Electric - Airplanes (FS/W) 0 Sep 05, 2002 09:55 PM