|
|
|
No CD
Hello Junsi,
I purchased the 1010+ Charger from Hobby City in HongKong. The charger is the best that I have ever used. I do, however, have a problem. There was no CD ROM disk in the box with the charger, there is a USB cable and a USB port on the charger but no software came with the charger. I would like to update and use the computer software for logging and so on. How do I get the USB software and the download software. Thank you for a fantastic charger. Robert. |
|
|
|
|
|
|
Check the first page of this thread for downloads of software and drivers
|
|
|
|
|
|
5s made up of 3s and 2s
Hi,
Can I balance a 5s pack made up of a 3s and a 2s pack, each with it's own balancing connectors, using the standard balancing board ? If I plug in 2s in the first 2s slot and 3s in the second 3s slot, will this work ? Cells 3, 4 and 5 are then actually on pins for cells 4, 5 and 6. It would make life easier if it works, no need for an additional cable. Thanks. KR, Chris |
|
|
|
||
|
Quote:
|
|
|
||
|
|
|
|
|
|
|
||
|
Quote:
found a simple workaround: - plugged the 3s in the first 3s balancer connector - plugged the 2s connector in the leftmost part of first 5s connector on the board. (I had to cut away some of the connector) Works nicely. |
|
|
||
|
|
|
Does anyone have a cellpro 10s (or any other IR or impedance tester) and an iCharger? I'm curious about the IR readings of different chargers/testers on the same battery, under the same conditions.
note: I'm not complaining about any chargers IR methodology, just interested in the data. |
|
|
|
|
|
USB port issue after V3.09 ubtate
hi Guys.
i have sucsessfully update my 1010B+ to 3.09. however, now i cant connect my charger with the pc anymore, i have reinstall the USB driver many time again ,but see the picture it wont reconize my charger again, also to upgrader will not work anymore, no connection... Any idees???? |
|
|
|
||
|
wrong temp sensorQuote:
it seems my charger came with an LM34 (Fahrenheit) sensor instead of an LM35 (Celsius). Can you send me a correct sensor please ? I sent my mailing address in a PM to you. Thanks, Chris |
|
|
||
|
|
|
I may buy one of these, probably the 106, but what is the minimum input voltage for charging 2S or 3S at 10A? Can I charge these batteries at 10A with a 12V lead acid battery on the field?
The specs talk of 13.5V input voltage for high power charging; with a 12V battery that does not seem very possible, as much as I know. Maybe for a short time, with a freshly charged battery. Bulent |
|
|
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Best charger/discharger $ can buy | namancio | Batteries and Chargers | 30 | Jan 31, 2010 03:52 PM | |
Power Pacer Battery charger/discharger | ACE_McCOOL | Batteries and Chargers | 4 | Oct 22, 2002 12:39 PM | |
NIB Hitec CG-325 Charger/Discharger/Cycler for 4-9 cells - $39! | Jason M | Aircraft - Electric - Airplanes (FS/W) | 0 | Oct 03, 2002 03:29 AM | |
WTB Good charger/discharger 10 + cells | WickedFunRC | Aircraft - Electric - Airplanes (FS/W) | 0 | Sep 05, 2002 08:55 PM |