A little help pleas EDP300 motor system??? - RC Groups
Thread Tools
Mar 25, 2008, 09:53 PM
dusty bible = dirty life
Majortomski's Avatar

A little help pleas EDP300 motor system???

Hello all

I have two of three things I need. I have the motor and prop, and motor mount for this combination


What is the correct GWS part number for the propeller to motor shaft adaptor and or spinner


Sign up now
to remove ads between posts
Mar 25, 2008, 10:29 PM
Registered User

You need the rubber spinner, "GW/SPN001" to fit both propeller and the 2mm motor shaft. It comes with 6 spinners in 3 different hub hole sizes, they are 1.5mm/0.059", 2.0mm/0.079" and 2.3mm/0.091".

There's a shaft adapter, GW/DS001 in line, but its shaft might still be thinner than the hub hole of the propeller you have, the EP4540 or EP4530 or EP5030.

Mar 26, 2008, 08:01 AM
dusty bible = dirty life
Majortomski's Avatar
Thank you! Off to my LHS!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! a little help with a motor plate. geneween Electric Heli Talk 7 Feb 09, 2007 11:28 PM
Need Help on Electric Motor System joe1 Power Systems 10 Dec 27, 2004 10:20 PM
Need Help Selecting Motor System joe1 Electric Sailplanes 1 Dec 23, 2004 08:26 AM
Partenavia Motor System Help!!!! LNL Power Systems 4 Jul 29, 2004 12:31 AM
problem with motor system...help! sdcfish Power Systems 7 Feb 02, 2003 01:14 PM