Thread Tools
Oct 30, 2012, 04:11 AM
Registered User
davereap's Avatar
Quote:
Originally Posted by lv2soar
Thanks Dave the pictures are helpful. Can you give an idea what is the width and height of the rudder?
this is on a 30" so add an Inch each way for the 36 version

and you forgot the link to the version you are making

wow! to those airbrushing pictures...
Sign up now
to remove ads between posts
Oct 30, 2012, 05:22 AM
flyin' fool
goldguy's Avatar
Here's my '2012/13' indoor NutBall. It's a fifteen incher, powered by a Hobby King 1612 motor spinning a 5X3 GWS prop on 2S 300 NTs, controlled by a TB 6A ESC, two 4.3 gram servos and a Corona 4 channel 2.4 RX.

LIGHT IS MIGHT.............

It weighs in at 90 grams or 3.17 ounces RTF for a wing loading of 2.58 ounces per square foot. That equates to super slow flight or amazing aerobatics with just a rudder and elevator, and the correct C of G. It will loop and roll both ways, high alfa at a walking pace, prop hang, kind of torque rolls, snaps and those crazy inverted spins, and do cool wall landings with a stall turn for the take off............and all indoors.
Oct 30, 2012, 08:38 AM
Lets break some props :D
joseico90's Avatar

Twin Nutball


After after a few test flights last summer I've finished it's nose and other bits.. its ready for more flying.

Thread and videos here;

https://www.rcgroups.com/forums/show....php?t=1680258
Last edited by joseico90; Nov 07, 2012 at 08:26 AM.
Oct 30, 2012, 12:49 PM
flyin' fool
goldguy's Avatar
Now that's one heck of a twin, looks great and I'll bet sounds cool too.
Oct 31, 2012, 11:03 AM
Lets break some props :D
joseico90's Avatar
Quote:
Originally Posted by goldguy
Now that's one heck of a twin, looks great and I'll bet sounds cool too.
Thank you Frank, check out the videos on the thread if you haven't, the sound on the video will give you an idea but it's much better in real life. Tell you what..it was well worth all the extra work for this twin, very rewarding.
Last edited by joseico90; Oct 31, 2012 at 11:06 AM. Reason: add video link
Oct 31, 2012, 11:06 AM
Lets break some props :D
joseico90's Avatar
One video of the twin here,

http://www.youtube.com/watch?feature...&v=sUKfqAI84Yw
Nov 07, 2012, 08:30 AM
Lets break some props :D
joseico90's Avatar

New Underball


Here is my second Underball, done a bit more to it..

-Added a couple of 3mm carbon strips to keep the EPP straight.
-Bent the tips with heat to desired dihedral, neat and strong.
Nov 07, 2012, 08:50 AM
Vertical approach specialist
potshot's Avatar
Quote:
Originally Posted by joseico90
...neat and strong.
... and stylish, as always.
Nov 07, 2012, 10:22 AM
flyin' fool
goldguy's Avatar
What kind of paint?
Nov 07, 2012, 10:42 AM
Lets break some props :D
joseico90's Avatar
With some cheap rattle cans I picked up in Spain last summer.
Nov 09, 2012, 11:13 AM
Aerodrenaline junkie
hoverc's Avatar
Hey guys,

just starting by NB. anyone think 6mm depron and 17" would work? haven't got any EPP at the mo. What motor would you recommend?
Nov 09, 2012, 11:16 AM
Aerodrenaline junkie
hoverc's Avatar
Oh and Joseico, how did you do the U/C on your twin?
Nov 09, 2012, 12:01 PM
Lets break some props :D
joseico90's Avatar
Quote:
Originally Posted by hoverc
Hey guys,

just starting by NB. anyone think 6mm depron and 17" would work? haven't got any EPP at the mo. What motor would you recommend?
A blue wonder on 2 or 3s will work fine on that..

See the twin's thread for the UC making ..

https://www.rcgroups.com/forums/show....php?t=1680258
Nov 09, 2012, 02:30 PM
chuck
Quote:
Originally Posted by hoverc
Hey guys,

just starting by NB. anyone think 6mm depron and 17" would work? haven't got any EPP at the mo. What motor would you recommend?
u could go up in size w/ the 6mm , 20" works well for outdoor if u are going that way.

chuck.
Nov 09, 2012, 05:40 PM
Registered User
hi guys here is the video of the maiden flight of my 17" nutball made from dollar store foam board

-18-11 2000kv Micro Brushless Outrunner (10g)
-turnigy plush 6A esc
-GWS EP Propeller DD-5030
-h-king 4.3g servos
-ZIPPY Flightmax 350mAh 2S 20C
-old Tx and Rx from blade sr helicopter

Nutball maiden flight (5 min 3 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question What is THE best free plan foamy? 3Dude 3D Flying 29 Jul 24, 2016 12:40 AM
Best R/C Day yet! R/C~Mev Electric Sailplanes 3 Nov 22, 2004 10:35 PM
Best Simulator for Foamy 3D Flying ? knut 3D Flying 10 Nov 02, 2004 12:51 PM
Best AXI for Foamy Factory 44" Extra? Doug Cronkhite 3D Flying 10 Mar 16, 2004 11:11 AM
Q: Best covering for foamy scale warbird? dimple Foamies (Kits) 4 Feb 05, 2003 06:14 AM