Graupner WP Mini Discus 2C - RC Groups
Thread Tools
Mar 13, 2008, 12:58 PM
Registered User

Graupner WP Mini Discus 2C

Anyone seen/bought the 'new', Graupner WP Mini Discus freeflight model? It is sreaming at me to convert it to electric....
I'm new to electric and tried to read up on some of the forums on topics such as motor/battery esc choice etc but if I'm honest I find it all a bit too much to get my head around. Would appreciate others thoughts on the feasability of such a conversion and suggestions on motor/prop battery suggestions
Sign up now
to remove ads between posts
Mar 13, 2008, 03:53 PM
Registered User
Jurgen Heilig's Avatar

Mar 17, 2008, 07:17 AM
Registered User

Discus 2c

Guten Morgan,
Danke! Ich kan a kleine Deutche sprechen aber ein bitchen! Bitte sehr am enlish, vielen danke
May 05, 2008, 04:14 PM
Registered User
cefesky's Avatar

Mini Discus of Graupner pictures and video!

The miniDiscus this fashion.
It's cheap, pretty and not fly too well ... but it's great fun.
These links will be able to assess ways to convert Minidiscus in RC.
May 06, 2008, 05:07 PM
Registered User
Markus Meier's Avatar
Hi there

i build mine with:
- UH 10gr BL motor
- Graupner 4.7x2.4 folding prop
- UH 10A 9gr ESC
- 2pcs 4.4gr servo
- 3S270 Lipo

- rudder and elevator
- AUW: 120gr

Flies very nice (and fast). With some wind, i was even able to glide.

Greetings Markus
May 08, 2008, 12:17 AM
Good Better Best quest.
olmod's Avatar
I am hoping that i can get one in Australia soon ,meanwhile i am happy doing these conversions. PM me if anyone can send one.
post 100 on for detail
Last edited by olmod; May 08, 2008 at 12:26 AM.
May 12, 2008, 06:26 AM
Registered User
FatBeech's Avatar

MiniDiscus with x-twin parts?

I bought one last week.
It's fine looking but flying? Little bit difficult.
But now I have a question:
What's about to build in the rc-parts from my Silverlit biplane (x-twin). These parts are very light und I think, it will fly then.
But where to stick the motor/prop-units? In the wings or maybe, with small sticks/pylons on top of fuselage, side by side.
May 12, 2008, 07:22 PM
Good Better Best quest.
olmod's Avatar
If you are using twin motors it would look better in the wings just my preference wether pusher or tractor mode would depend on how the cg works out is the model made from elapor? or eps?
Still cant find one to buy
Last edited by olmod; May 12, 2008 at 08:05 PM.
May 13, 2008, 06:22 AM
Registered User
FatBeech's Avatar

The model is from Elapor. But the name for the Graupner-material is another one.

If you want to have a model, it will maybe possible soon:

I have a friend here, who's son is living in your country. Within the next weeks he will visit his mom in germany and can then take one or two kits back to australia...
May 13, 2008, 08:44 AM
Good Better Best quest.
olmod's Avatar
Thankyou very much PM me anytime you are ready please.
I have had no response to emails from the australian Graupner agents but i am told that is not a surprise. .
May 18, 2008, 08:48 PM
Good Better Best quest.
olmod's Avatar
Just had an email from the Australian agent Model Flight , they will not be bringing any to Australia
May 19, 2008, 01:09 AM
Registered User

Rejoice anyways

Originally Posted by olmod
Just had an email from the Australian agent Model Flight , they will not be bringing any to Australia
Rejoice, 'cause you guys got the MP Fox; we still don't.

Happy Flying,

LarryR : )
Jul 08, 2008, 04:35 PM
AKA Cactus
Phillybaby's Avatar
does anyone know the thrust angle for a nose mounted motor?
got a little 12mm jobby to go in, tho i am tempted by a high mount for some really low carefree flying.
Jul 08, 2008, 10:37 PM
Good Better Best quest.
olmod's Avatar
I gave about 3 deg down some of the ones over here using a 15g motor have r/thrust as well ,if i was doing this one again i would not worry about rudder,just alerons and elevator,and a few use some expo as well ,keep the cg forward it will keep you on you toes
Sep 11, 2008, 08:44 PM
Good Better Best quest.
olmod's Avatar


Finally I got my hands on one , will be maidening tomorrow i expect to be using motor/elevator mix on mix 1 on the DX6i.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Discus 2c PeterMarkus Scale Sailplanes 0 Aug 14, 2007 09:27 AM
Discussion Graupner WP U16 Mini uboat £25 rtr! jonread1983 Submarines 9 Jul 28, 2007 05:44 PM
Discussion Graupner WP HORNET 206 Emanuele Scale Sailplanes 1 Dec 02, 2006 08:10 PM
Discussion Graupner´s Mini Sprint 400 on test joao Racing Boats - Electric 1 May 21, 2006 08:22 AM