Where do i get an LA stick? - Page 2 - RC Groups
Thread Tools
Jan 26, 2013, 07:52 PM
Registered User
With a 7.4v 350mah and a 10 amp speed controller wood it fly wheel
Sign up now
to remove ads between posts
Jan 26, 2013, 07:54 PM
Registered User
coriolan's Avatar
If well build yes!
Jan 26, 2013, 08:20 PM
Registered User
La stick is it a easy plane to build and fly
Jan 31, 2013, 08:55 AM
Registered User

can be easy to fly

Originally Posted by Rczorro
Is very easy to fly and very strong and stable and is good for ruf fields because is trong and
It can land very short distans
Try a throttled o10 or 020 to tame it down to your tastesso you don`t do this: http://www.youtube.com/watch?feature...&v=5UwE5eQYNWc

My son and I are going to build our la stick short kits together after my LHS gets my balsa order in
Jan 31, 2013, 08:59 AM
Registered User

Gmark .03 r/c

Originally Posted by coriolan
A Graupner Speed-400 run fine on a 5X5 prop direct drive but might be too much for a LaStick which is really intended for .020 glow power. I flew mine with a Cannon G-Mark .030 initially but it now fly with a 10 grams outrunner from HK+5X3 prop(plenty of power)mine is 4 channels with no dihedral
Fairly sweet litle engines aren`tthey? I doubt I will manage to wear out my spare G-mark .03r/c engines in my lifetime but just in case I have a couple that are patiently waiting their turn lol
Jan 31, 2013, 09:32 AM
Registered User
coriolan's Avatar
The Cannon G-Mark is indeed a sweet little engine which throttle well and relatively quiet, the weak point is the piston/conrod ball joint that needs resetting like its Cox counterpart!
Jan 31, 2013, 02:15 PM
Registered User
Is it hard to scratch build it
Jan 31, 2013, 07:07 PM
Registered User
coriolan's Avatar
No if not a first build.
Feb 01, 2013, 07:05 AM
Registered User
Is it easy to fly with a speed 400

And may it fly with tissue paper covered on the wing
Feb 03, 2013, 08:49 PM
Registered User
They aren`t hard to build from a kit,even a short kit, but I havnt tried to scratch build one yet;my knife skills aren`t that great lol
Feb 04, 2013, 06:00 PM
Registered User
I'm trying to make a nice flying plane that may fly wheel
So pict the la stick with a speed 400
Feb 05, 2013, 10:56 PM
Registered User
Thats a catch 22, I can picture the la stick,but not the speed 400,I havn`t gotten into messing around with the electrics yet;but the la stick is a good way to go
Feb 06, 2013, 01:22 AM
Registered User
coriolan's Avatar
Speed-400 is a brushed motor which can swing a 6"X3" prop at about 10000 rpm on 7.2V,a bit less power than a .049 babe-bee. A bit too heavy for a LaStick!
Feb 06, 2013, 06:54 AM
Registered User
Here's picture of both my LaStik's. The red one started out as electric, with dihedral and a EFlite Park 250 motor. I switched it to a Cox .020. It flew good with the .020, but after having throttle, and alot longer flite time, and no cleanup, it wasn't as fun for me. Not saying it wasn't fun to fly, I just preferred the electric version.

The purple one is without dihedral and a Turnigy 2211 The wife made me remove the crosses and put the teddy bears on it for her!

I would not try to use the 400 way to big and heavy, the Turnigy is more than enough power with a 2s 7.4V 320Ma 25c battery.


Edit: The motor was a Eflite Park 250, not 280.
Last edited by Toysareforkids; Feb 08, 2013 at 09:16 PM.
Feb 08, 2013, 08:01 PM
Registered User
Well my my my, now I know what to go to my LHS abd order if my son wants a lekky version, thank you very much!!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Where do I get the Stick? zed Parkflyers 5 Oct 05, 2004 06:59 PM
Where Do I Get Slow Stick Floats? pbodyline Parkflyers 2 Jun 14, 2004 02:26 PM
Where can i get an aluminum fuselage ( 9mm x 4.5mm x 24") for my PICO STICK? L.I.A. Parkflyers 11 May 29, 2003 09:13 AM
Where do you get foam? macross Power Systems 9 Jul 16, 2001 02:08 PM
Where do you get brushes for an AP29? sbarrow Electric Ducted Fan Jet Talk 1 Jun 19, 2001 12:32 AM