New Products Flash Sale
Thread Tools
Old Feb 24, 2008, 03:51 PM
dhelms9138 is offline
Find More Posts by dhelms9138
Crash test dummy
Yippee!

Let's see your workshop!


Hi, Let's have a thread where everyone can post photos of your workshops. I have a new house with an attic room about 16'x26' that I will be turning into my workshop. My workshop that I built with the house got turned into a bedroom for my oldest son, so it's time to start over. I'm looking for some good ideas of how to set it up and what to put in it. Any photos or ideas will be appreciated.
Last edited by dhelms9138; Mar 06, 2008 at 07:41 PM. Reason: Add photo
Sign up now
to remove ads between posts
Old Feb 24, 2008, 07:36 PM
Zor is offline
Zor
Find More Posts by Zor
Zor
Suspended Account
Quote:
Originally Posted by dhelms9138
Hi, Let's have a thread where everyone can post photos of your workshops. I have a new house with an attic room about 16'x26' that I will be turning into my workshop. My workshop that I built with the house got turned into a bedroom for my oldest son, so it's time to start over. I'm looking for some good ideas of how to set it up and what to put in it. Any photos or ideas will be appreciated.
Hello,

If you browse around in the forum and/or make a search, there is a thread showing dozens of pictures of workshops.

There is also threads listing what typically are usefull tools.

Sorry I cannot take the time right now to search for you and point out the URLs.

I wish I had a workshop. I work from my dining table.

Zor
Old Feb 25, 2008, 05:46 PM
chashint is offline
Find More Posts by chashint
Registered User
Quote:
Originally Posted by dhelms9138
Hi, Let's have a thread where everyone can post photos of your workshops. I have a new house with an attic room about 16'x26' that I will be turning into my workshop. My workshop that I built with the house got turned into a bedroom for my oldest son, so it's time to start over. I'm looking for some good ideas of how to set it up and what to put in it. Any photos or ideas will be appreciated.
So you like to use foam huh ??

My work shop is a disaster right now, maybe I will snap a few pics and post them when I get home.
Old Feb 25, 2008, 07:39 PM
glucoseboy is offline
Find More Posts by glucoseboy
Registered User
glucoseboy's Avatar
Mine's a mess. No photos please!


Here's a link to some workshop pics on HeliFreak.com Some are very nice!

http://www.helifreak.com/showthread....light=workshop
Old Feb 25, 2008, 08:32 PM
Haole is offline
Find More Posts by Haole
Stranger in a land
Haole's Avatar

I'll Play :)


Hi folks,

I suppose that I have a slight advantage to the average hobbyist because I've been designing and building furniture (in addition to my RC addiction) professionally for about eight years now, thus I've accumulated some machines.

Here's my present 1200^foot shop from a few angles. Note that this is just before I moved in more crap including a cadre of large scale aircraft that my grandfather had built before his death, as well as some of my father's scale aircraft.

It's a fun space to build in and having full scale machinery comes in very handy when building model aircraft. Examples that I couldn't live without are the large band saw and my two table saws. I also use my edge-sanding machine more than any other tool in the shop (besides the benches or perhaps the miter saw).

Hope that this is inspiring and note that anyone can start piecing together a real wood shop for relatively little expense. I'd recommend starting with a small table saw, then band saw, a drillpress is VERY handy, sanding equipment as already noted, and so on.

By the way, you can never have too many tools or shop space
Old Feb 25, 2008, 09:27 PM
dhelms9138 is offline
Find More Posts by dhelms9138
Crash test dummy
Excellent workshop Haole. Those photos give me a lot of good ideas. I especially like the tables with the storage underneath. Good Idea!

Yeah chashint, I like foam. A lot of my planes are made of foam. I have several parkjets made from Jetset plans. I have an unlimited supply of white foam. 1" all the way up to 12" thick. Some of it is 4' x 8' sheets. High compression foam, medium density foam....you name it. I have a hot wire cutter at my office, but I'm hoping to bring in home and set everything up in one place. I want to build, or buy, a CNC machine in the near future and hopefully get into some CAD modeling. I'm pretty good with computers, and I draw house plans all the time. It's a different form of CAD though. I'm sure that I can pick it up with some help.

Thanks for the pics and the ideas. I'll post pics of my workshop as it comes along.
Old Feb 26, 2008, 02:00 PM
dusty IV is offline
Find More Posts by dusty IV
Registered User
dusty IV's Avatar
My hobby shop over looking the lake. About 2500 sq ft or so. Long retired I put this together for my man-cave. Sure makes building toy airplanes a lot easier and quicker. I have a lot of Euro equipment bought before the $ tanked. One really neat machine is a Jet floor spindle sander. A Horizon belt sander makes quick work of edges.

Shop has a 10 HP cyclone for dust collection so it stays clean with no effort.
Old Feb 26, 2008, 11:18 PM
chashint is offline
Find More Posts by chashint
Registered User
Here is a shot of my club pylon racer in my climate controlled 'airplane' room.
Table saw, drill press, and bandsaw live on my side of the garage.
Like I said it is a disaster right now.
Old Feb 26, 2008, 11:34 PM
KaneTheMediocr is offline
Find More Posts by KaneTheMediocr
geez guys--these workspaces look almost....clean. *shudder*
Old Mar 02, 2008, 11:19 AM
rcwannabee is offline
Find More Posts by rcwannabee
Registered User
rcwannabee's Avatar
Well my work space is not as spacious, it is in the house. My wife decided we needed to have somewhere to do our hobbies, so she gave me the dining room!! I just set it up last week, so there is not much going on yet.

Those work shops are brilliant! I am very envious of you guys, I can only dream of one day having that kind of space and equipment.....someday......

Well I lost the dining room as my hobby space, now I am jamed in to the furnace room. Small but cosy.
Last edited by rcwannabee; Jan 24, 2009 at 10:21 PM. Reason: Update
Old Mar 07, 2008, 06:29 PM
dhelms9138 is offline
Find More Posts by dhelms9138
Crash test dummy
Man, that's an awesome shop. I want a CNC foam cutter so bad, but I can't justify buying one and I'm dang sure not smart enough to build one. I could build the machine itself, but the electronics would drive me crazy. I'm not very good with electronics.

Where do you buy cloth by the rolls and resin by the 5 gal bucket? I imagine it's cheaper that way.
Old Mar 08, 2008, 10:15 AM
Al Offt is offline
Find More Posts by Al Offt
Registered User
Wow, I'm envious. I have parts of a basement that I use to multiplex model building with other projects among overflow storage of household items. I'm not particularly proud of its cluttered condition but pictures represents modeling in a confined basement.

Kane . .,
My layout might be more representative of the majority of us (with basements).

Alan
Old Mar 08, 2008, 04:20 PM
Haole is offline
Find More Posts by Haole
Stranger in a land
Haole's Avatar

Cellar Dweller


Alan,

My grandfather used to build 1/4 scale beasties in the cellar of his home. His airplanes were so big and the stairway so restricting that he had to use an old trap door in the floor--originally there to lower the oil heater down--to bring his planes up!

After his death in '97 I began to convert his barn over into my first real woodshop. This was in Connecticut...

Anyways, here are a few shots of that old barn shop and you can see a giant-scale plane or two hanging around! Built in a cellar by my dear ol' Gramps! Why he never organized his machines and used this building is beyond me, aside from the fact that it needed electrical service run to it.

Carl


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gallery Let's see your boats flailing Scale Boats 350 May 26, 2016 08:47 AM
Let's see your peanuts flailing Free Flight 115 Aug 04, 2011 12:41 AM
Idea Let's see your sloper pics! Ben74 Slope 161 Aug 04, 2005 06:44 PM
Let's see your pilots! DennisG Electric Plane Talk 39 Jun 09, 2003 07:05 AM
Let's see your Pumkins! Troy Life, The Universe, and Politics 27 Nov 08, 2002 12:00 AM