New Products Flash Sale
Thread Tools
Old Mar 08, 2010, 03:42 PM
Lynx75 is offline
Find More Posts by Lynx75
Registered User

Plans


Thanks Vince,
There seems to be a difference between my boat and what the plans show. My boat has two hatches, one for the sail control and receiver access and one for the rudder shaft access. My sails show US 12 on the top of the sails but I have been told that it is a West Coast 12. Is there a difference or are they the same boat? My deck is flat so I guess I am going to have to remove it and put on a new desk. Any other information would be greatly appreciated.
Sign up now
to remove ads between posts
Old Mar 08, 2010, 03:44 PM
Aerominded is offline
Find More Posts by Aerominded
Registered User
Quote:
Originally Posted by Lynx75 View Post
Thanks Vince,
There seems to be a difference between my boat and what the plans show.
Keep in mind, there is a "US 12" class that is different than the "West Coast"/Newport 12... West Coast 12 was the original name for the N12...


This may be your boat...
http://www.theamya.org/boats/us12/
Old Mar 08, 2010, 04:43 PM
Lynx75 is offline
Find More Posts by Lynx75
Registered User

12 meter


The tag that is glassed into the hull says Newport 12 Meter with hull #436. So I guess I still need to find some construction sheets and instructions.
Old Mar 08, 2010, 04:55 PM
Aerominded is offline
Find More Posts by Aerominded
Registered User
Oh- No mystery then...

the drawings Vince posted are the drawings you need- Perhaps a previous owner deviated from same with extra hatches, etc. it happens-

Good luck-
Old Mar 08, 2010, 07:09 PM
Vince Hoffmann is offline
Find More Posts by Vince Hoffmann
Registered User
Vince Hoffmann's Avatar
Quote:
Originally Posted by Lynx75 View Post
Thanks Vince,
There seems to be a difference between my boat and what the plans show. My boat has two hatches, one for the sail control and receiver access and one for the rudder shaft access. My sails show US 12 on the top of the sails but I have been told that it is a West Coast 12. Is there a difference or are they the same boat? My deck is flat so I guess I am going to have to remove it and put on a new desk. Any other information would be greatly appreciated.
The Newport 12 (West Coast 12) is 72" long, overall. The US 12 is 46" long overall. A Newport 12 sail insignia will be 12
Mine is an older N12, designed and fabricated back in the early 80s. The newer boats have two, sometimes three hatches (you can put in as many as you like). I made mine with two, just like how you described yours.

If you believe your boat is a Newport 12, I would recommend sending an email off to Don Dixon, the class president, with your hull number, he could shed some light on who made your boat, then you could start unwraveling the mystery.
newport12@theamya.org
Last edited by Vince Hoffmann; Mar 08, 2010 at 07:14 PM.
Old Mar 09, 2010, 10:03 AM
Lynx75 is offline
Find More Posts by Lynx75
Registered User
My boat is a Newport 12 Meter. Fiberglassed in the hull is a label saying Newport 12M home of the Newport 12 Meter boat, hull number 436. I would be willing to pay for a set of instruction plans and diagrams instead of trying to blow them up from a set copied from a post.
Last edited by Lynx75; Mar 09, 2010 at 10:25 AM.
Old Mar 09, 2010, 11:45 AM
Vince Hoffmann is offline
Find More Posts by Vince Hoffmann
Registered User
Vince Hoffmann's Avatar
The prints posted were scanned at full size (24"x36") so you shouldn't have any problem printing them on a large format printer. You may also be able to get a copy of the instructions from the original manufacturer.
Old Jun 17, 2010, 06:35 PM
norgale is offline
Find More Posts by norgale
Retired for now
Would anyone have some cross sections of the N12? I'm planning on building one with a plank on frame hull and I have the plan of the boat and a side shot but no cross sections or lines to get them from. Pete
Old Jun 18, 2010, 11:29 AM
woodybob is offline
Find More Posts by woodybob
WooHoo!
woodybob's Avatar
Seen these Pete?
https://www.rcgroups.com/forums/show...53&postcount=8


Thread Tools