Brent .
I am doing the enlargement of it right now.
1410 mm long and WS 1214mm

nice Claus im sure he is going to like that size cougar

just an update before I glass it inside tomorrow

Claus

looking good really fast and strong way to build it .

Claus, how much do you have sand the inside of the fuse so the sections are all smoothed out before you glass the inside? Thanks!

Great looking jet again! I'm glad you're rebuilding it, when a model flies that well...

got a little done today.
Claus

did you glass with 2oz. cloth?,looks good ,very fast constrution method...and strong

i'm curious s well. My next project, im thinking of trying this out .
I got to find away to loose some weight on my builds.

Most of mine are smallish and im wondering how much savings id get solid foam versus the removal and adding it back in the weight with glass and resin

the material I use is 49 gram/m˛ As far as I can calculate is it 0.05 oz/ foot˛
The thickness if made on a glass plate is 0.1 mm or 1/50 inch

the rest is now curing..
pictures tomorrow.

Claus

49g should be close to 1.5oz.

Now you've got me thinking though - 49gsm is only about 0.16oz/sqft (using 30g/oz and 9ft2/m2). Something's wrong here???

Edit: Found it. Some places use oz/sq ft, others use oz/sq yard... I get 3/4oz or 25gram from two different suppliers, but same cloth.

yes the oz. weights are per a sq. yard,3ftx3ft...1.5 to 2oz. is what i would have used too to do this job...my depron skined draken was glassed with .06 oz. cloth

now it is time for wings and vertical fin.
Claus

wow that was easy ...it took me a year to get to that point

man that looks great claus! looks like a great way to make plugs too...fully composite 90mm cougar anybody??? haha.