Thread Tools
Old Apr 19, 2009, 07:06 PM
rvincent is offline
Find More Posts by rvincent
Renegade Fun Forever!!
rvincent's Avatar
10 and 12 gauge
Sign up now
to remove ads between posts
Old Apr 19, 2009, 07:08 PM
TPfingston is offline
Find More Posts by TPfingston
Retired and Lovin' it!
TPfingston's Avatar
Thx, Bob

Tony
Old Apr 19, 2009, 10:23 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
yes i have 10 ga on mine
Old Apr 20, 2009, 12:26 AM
rvincent is offline
Find More Posts by rvincent
Renegade Fun Forever!!
rvincent's Avatar
Where are you going to do the maiden? I would like to be there
Old Apr 20, 2009, 12:36 AM
One Six Right is offline
Find More Posts by One Six Right
another MONSTER ?
One Six Right's Avatar

As


Rodger, I'm sure you changed to bullets by now, but here's what has happened to me in the past......If you mix a "real" deans connector half with a clone (cheap copy) deans connector half, they don't fit properly. They "feel" hard to join, and to seperate, But you will get an intermittant contact. Threw all the clones in the trash. Just one of the reasons I changed most of my stuff to bullets. Hope that helps.
I'd love to see the maiden as well, If your gonna do it down here.
Gary
Old Apr 20, 2009, 10:26 AM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
Gary i think you got it .....but i got the Deans from EJF ,i was sure they were real ,i'll ck to be sure ,but i think i will swap over to bullets ...if i could find some ....LHS only has 3.5 mm even after we asked for bigger ones not sure yet Bob where ,
Old Apr 20, 2009, 11:16 AM
One Six Right is offline
Find More Posts by One Six Right
another MONSTER ?
One Six Right's Avatar
Quote:
Originally Posted by AIR SALLY
Gary i think you got it .....but i got the Deans from EJF ,i was sure they were real ,i'll ck to be sure ,but i think i will swap over to bullets ...if i could find some ....LHS only has 3.5 mm even after we asked for bigger ones not sure yet Bob where ,
Hobby People has 4mm bullets. If your down by Apollo field, E-Hobby House on Vanowen, at White Oak has 'em. (or order from thier website... www.helihobby.com ...) I get bigger ones from www.offshoreelectrics.com
Old Apr 20, 2009, 11:48 AM
rvincent is offline
Find More Posts by rvincent
Renegade Fun Forever!!
rvincent's Avatar
You can get them from Robert at EJF
Old Apr 20, 2009, 03:03 PM
FresnoJay is offline
Find More Posts by FresnoJay
To drive or to fly......BOTH!!
FresnoJay's Avatar
AS, I had to special order my CC 6.5's from my LHS. Plus they weren't cheap but worth it and you will see a gain in the higher current apps over the deans.

Jason
Old Apr 20, 2009, 03:28 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
so do you put a male and female bullet on each Batt and visa versa on esc???
Old Apr 20, 2009, 03:39 PM
rvincent is offline
Find More Posts by rvincent
Renegade Fun Forever!!
rvincent's Avatar
All males on the motor, all females on the motor side of the ESC. Female on the battery positive, male on the negative. Male on the positive ESC and female on the negative ESC
Old Apr 20, 2009, 03:54 PM
FresnoJay is offline
Find More Posts by FresnoJay
To drive or to fly......BOTH!!
FresnoJay's Avatar
I put males on the ESC batt leads and Females on the batt leads. But to each thier own . Males on the Motor and females on the ESC motor wires.

Jason
Old Apr 20, 2009, 03:58 PM
rvincent is offline
Find More Posts by rvincent
Renegade Fun Forever!!
rvincent's Avatar
well that's because you are still running low power You can't "series" your batteries unless you have a male and female on each one
Old Apr 20, 2009, 04:55 PM
FresnoJay is offline
Find More Posts by FresnoJay
To drive or to fly......BOTH!!
FresnoJay's Avatar
You knnow whats in the works. Bullets will be getting changed when the time comes . When I put the bullets on in thier current config I hadn't had any experience with them. But I am always learning and never ashamed to admit it .

Jason
Old Apr 20, 2009, 10:51 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
Thanks Bob ...i need to set it up so i can run series for the Bear cat (8s) and the Draken will be 4s....for now
i have a lot of squaks to fix before i can madien


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Made in Sweden J-35 Draken Jocke Electric Ducted Fan Jet Talk 45 Feb 04, 2008 12:37 AM
Discussion Saab Draken J-35 cyclops2 Japan 1 Aug 10, 2007 02:37 PM
Discussion J-35 Draken from blue fanfold. soarrich Pusher Prop Jet Models 0 Jan 08, 2006 07:27 PM
GWS J-3 Gets Flaperons, Build Photos 4throttles Parkflyers 9 Aug 12, 2002 02:06 AM