Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jan 28, 2008, 04:34 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
ok, closing in on the home stretch folks! a few more things left to take care of. Maiden is looking like thursday. my namiki pager motors came so I'll test those tomorrow.
Last edited by metroidrc; Jan 28, 2008 at 04:50 PM.
Sign up now
to remove ads between posts
Old Jan 30, 2008, 04:23 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
wow... I actually finished. Did all of the linkages, painted the pilot, sealed everything up. AUW is 24 grams. With the batteries I have now, I can only get 14g of thrust. Tomorrow will have some pictures and hopefully video of the maiden!
Old Jan 31, 2008, 10:52 AM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar

F100 Final


Ok this is the official entry. Video forthcoming.
Auw - 24 grams
WS - 11"
Plantraco mini jst 4 channel
2 muscle wire servos
jetscream fan with stock motor
2 cell lipo - 110mah

link to video:
https://www.rcgroups.com/forums/show...11#post9057294

as you can see with my one second "flight" I need some more elevator
Last edited by metroidrc; Jan 31, 2008 at 10:40 PM.
Old Jan 31, 2008, 11:00 AM
Ryan Archer is offline
Find More Posts by Ryan Archer
Registered User
HOLY CRAP!
that thing is Freakin awesome!!!!
ryan
Old Jan 31, 2008, 11:36 AM
Cuddles is offline
Find More Posts by Cuddles
Be afraid!
Cuddles's Avatar
Really impressive, my best compliments!

Regards

Francesco
Old Jan 31, 2008, 12:59 PM
indoor_fr is offline
Find More Posts by indoor_fr
Registered User
indoor_fr's Avatar
Very good job!

Question: Where have tou put the rx, servos etc...?
Old Jan 31, 2008, 02:05 PM
NitroCharged is offline
Find More Posts by NitroCharged
Team30 Micro EDF
NitroCharged's Avatar
Looking real sweet Josh.
Old Jan 31, 2008, 02:24 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
thanks everyone! well I had the maiden, not the greatest thing. The cg was off by about an inch - too far forward. I could tell the plane had plenty of power, but it went straight down. I got some video but its so short. I'm gonna move the battery back and try again today if I can.
Old Jan 31, 2008, 03:13 PM
Tim Cullip is offline
Find More Posts by Tim Cullip
Registered User
Tim Cullip's Avatar
Quote:
Originally Posted by metroidrc
thanks everyone! well I had the maiden, not the greatest thing. The cg was off by about an inch - too far forward. I could tell the plane had plenty of power, but it went straight down. I got some video but its so short. I'm gonna move the battery back and try again today if I can.
Did your paper fuselage survive the maiden (hope so)?

Tim
Old Jan 31, 2008, 03:42 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
yep, survived... its like rubber, just keeps bouncing back! lol
Old Jan 31, 2008, 06:50 PM
aerogel is offline
Find More Posts by aerogel
Thanks for the Fish!
aerogel's Avatar
Awesome Metroidrc the decals really make it come alive..
Old Jan 31, 2008, 07:30 PM
Heliman420 is offline
Find More Posts by Heliman420
Like a Boss
Heliman420's Avatar
very nice work!
Old Jan 31, 2008, 07:48 PM
mcross is offline
Find More Posts by mcross
For Sale-everything over 250 g
Josh, That's looks really good! You have me convinced, my next jet will be molded paper.
Mike
Old Jan 31, 2008, 08:09 PM
RC WANABEE is offline
Find More Posts by RC WANABEE
RC WANABEE
Absolutely Fantastic! Good Job! Man it must have taken a lot of patience to pull this off. I hope you get it flying as well as it looks...Good luck!
Old Jan 31, 2008, 08:52 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
Quote:
Originally Posted by mcross
Josh, That's looks really good! You have me convinced, my next jet will be molded paper.
Mike
Thanks Mike - actually the tissue molding part of the process was by far the easiest part. Getting the electronics to fit in and the servos to work right was the hardest. It flew for about a second, I think my stab is tilted too much and its making the plane dive instantly... Will try more tests tomorrow.
-Josh


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert ···SCOOP···RBCkits F-100 Super Sabre···SCOOP··· Prop-er Electric Ducted Fan Jet Talk 71 Feb 16, 2009 03:57 PM
Jet Design Contest: Micro Sport Jet FredN Electric Ducted Fan Jet Talk 60 Apr 21, 2005 09:14 AM
F-100 Super Sabre lebardemelon Pusher Prop Jet Models 5 Apr 20, 2005 09:34 AM
F-100 Super Sabre Tim H. Electric Ducted Fan Jet Talk 22 Apr 28, 2002 09:26 AM
F-100 Super Sabre Ed Couch Electric Ducted Fan Jet Talk 6 Dec 30, 2001 11:12 AM