Thread Tools
Old Jan 21, 2008, 04:38 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
oops! well the plane was only $11.95 so I could buy it again..
Sign up now
to remove ads between posts
Old Jan 21, 2008, 07:43 PM
aerogel is offline
Find More Posts by aerogel
Thanks for the Fish!
aerogel's Avatar
Quote:
Originally Posted by NitroCharged
Did you scan the decal set before using them? That way you can print your own off each time
heh...guy thinks like i do.. I must have some 400 decal files
Old Jan 21, 2008, 08:36 PM
kelberts is offline
Find More Posts by kelberts
Effumall
kelberts's Avatar
I gotta see this one, Josh! Looks awesome in the pix.

Bringing it Tuesday? (Or maybe should wait until outdoors possible??)

Tom
Old Jan 21, 2008, 08:44 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
I'll bring it on thursday, I have to still make the stab and figure out how I'm going to setup the ailerons cleanly. Outside may be a good idea for the maiden also, but I'll definitely need to get video! I am bringing my new Extra 360 tomorrow that Ryan Archer designed(from the micro edf contest) its got a 16" wingspan and is ready for 3D!
Old Jan 22, 2008, 08:49 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
well I'm faced with some tough decisions now. time is of the essence for the contest so I'm debating about power setups. I'd like to give the brushed setup a chance, after all, its very light. I'm looking at an AUW of 22 grams. Brushless is looking tempting now too... With the plantraco rx and yge4 controller, I can get the weight down to 37 grams brushless. Most likely I'll have to maiden indoors, so I shoud probably choose brushed. Maybe I'll do a conversion when it gets nice out.
Old Jan 22, 2008, 08:54 PM
mcross is offline
Find More Posts by mcross
For Sale-everything over 250 g
Josh,
I don't know what your wing loading is but it's probably too high to use the brushless setup. Go with the brushed motor for now.
Mike
Old Jan 22, 2008, 08:59 PM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
wing loading is 12g/sq.dm brushed, 21g/sq.dm brushless
Old Jan 22, 2008, 09:24 PM
mcross is offline
Find More Posts by mcross
For Sale-everything over 250 g
Hi,
At 12g/sq.dm brushed it'll be fairly easy to fly. Also the lighter weight will keep momentum low so damage won't be as bad if you crash it. If you can get 15 grams thrust it should do nicely.
At 21g/sq.dm brushless it will be significantly faster.
Mike
Old Jan 23, 2008, 06:58 AM
indoor_fr is offline
Find More Posts by indoor_fr
Registered User
indoor_fr's Avatar
The only solution to get a similar AUW with a brushless motor and then a wingloading compatible with indoor flying, is to use the DC enterprise 3g motor made for the EDF30 (sold at BSD).
Maybe it can give a decent thrust with one lipo as the thrust with 2 lipos is 35-40g.
Needs a home made DF to fit the motor.

The ESC could be the MCB3 microinvent (0,5-1g).
i admit it's an expensive solution.
Old Jan 23, 2008, 11:14 AM
kelberts is offline
Find More Posts by kelberts
Effumall
kelberts's Avatar
Yeah, 1.2 oz of thrust for $80.00?????

I was just struck by the fact that I have a 102mm Haoye fan and a Quannum 1500 watt inrunner in my 55" Hawk, and both of them came to about $60.00, for about 6 POUNDS of thrust! LOL!

(Of course, the 10S A123 packs add a little to the cost)!

Oh well, really big and really small end up costing more than just regular stuff, I guess!
Old Jan 23, 2008, 11:20 AM
Chris T is offline
Find More Posts by Chris T
Micro Jet Pilot
Chris T's Avatar
Quote:
Originally Posted by kelberts
Yeah, 1.2 oz of thrust for $80.00?????
Yes, with a 3g motor! It's all relative as Einstein said...

Chris
Old Jan 23, 2008, 11:23 AM
kelberts is offline
Find More Posts by kelberts
Effumall
kelberts's Avatar
Yeah, now if we could have a working version of an antimatter drive, we could get huge power from REALLY tiny equipment - LOL!
Old Jan 23, 2008, 11:27 AM
kelberts is offline
Find More Posts by kelberts
Effumall
kelberts's Avatar
I wonder what has the maximum thrust/weight larger or smaller - Lessee, the EDF 30 above weighs about 6 grams and makes 40 grams - like about a 7/1 ratio -

I believe my 102" combo might have that beat --- I'll confirm
Old Jan 23, 2008, 11:40 AM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
well I did get a price for a 6mm custom made brushless motor that is $206. I'm waiting to find out how many rpms it can put out at 3.7 and 7.4volts and how much it weighs.
Old Jan 23, 2008, 11:40 AM
metroidrc is offline
Find More Posts by metroidrc
Micro EDF addict
metroidrc's Avatar
well speak of the devil!

Hello Josh,

They weigh 2.5g. The speeds are 27500 rpm and 55000 rpm.

Sincerely,

Ken Porterfield


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert ···SCOOP···RBCkits F-100 Super Sabre···SCOOP··· Prop-er Electric Ducted Fan Jet Talk 71 Feb 16, 2009 03:57 PM
Jet Design Contest: Micro Sport Jet FredN Electric Ducted Fan Jet Talk 60 Apr 21, 2005 09:14 AM
F-100 Super Sabre lebardemelon Pusher Prop Jet Models 5 Apr 20, 2005 09:34 AM
F-100 Super Sabre Tim H. Electric Ducted Fan Jet Talk 22 Apr 28, 2002 09:26 AM
F-100 Super Sabre Ed Couch Electric Ducted Fan Jet Talk 6 Dec 30, 2001 11:12 AM