Thread Tools
Old Dec 11, 2008, 01:11 PM
RacerX208 is offline
Find More Posts by RacerX208
Registered User
RacerX208's Avatar
Same here. I used a 3s1p 1200mah pack from TrueRc all season and it flew great. Would fly as slow (or as fast) as I wished. Flight times around 15 minutes.
Sign up now
to remove ads between posts
Old Dec 11, 2008, 07:06 PM
martys is offline
Find More Posts by martys
Check your six
martys's Avatar

Battery pack


Well Boys, based on your recommendations I may just up the battery pack to what you are using. Can't hurt right? Marty
Old Dec 12, 2008, 06:25 PM
14 Maverick is offline
Find More Posts by 14 Maverick
Registered User
14 Maverick's Avatar
You were right Martys! The plane flew great!! Just like its big brother. I am also on a 2 cell, which is plenty of power with my set-up inside. When it goes outside I will try a 3 cell.

Here is some video of the maiden, I know alot of flying around in circles, but I did not want to try anything too crazy inside. Watch towards the end, this plane can really slow down with still alot of control. After this video was shot I got it to do some really high alpha slow flying, it is alot of fun!!

Thanks again for the plans!

F-22 Mini Raptor (3 min 10 sec)
Old Dec 12, 2008, 06:32 PM
adbradley is offline
Find More Posts by adbradley
Registered User
adbradley's Avatar
You gotta get that thing outside and let it rip
Old Dec 12, 2008, 08:28 PM
martys is offline
Find More Posts by martys
Check your six
martys's Avatar

The maiden


Excellent Maverick!!!! Congrats on the maiden! I loved your video! Boy is it a sweet plane to fly. I can't till we can all fly outside! I expect the planes to go supersonic! BTW, I'm going to build the mini F15 (see the video with Sal C fly his 59% Pocket F15). Here is the website: http://www.parkjets.com/f15-eagle.html Tell me what you Guys think of Sal's pocket F 15. I already downloaded the plans and have started cutting parts out. Marty
Old Dec 12, 2008, 08:46 PM
corsair nut is offline
Find More Posts by corsair nut
fly like an EAGLE ;)
corsair nut's Avatar
i built a 22 last night from 6mm depron. made a few changes, but for the most part left the design alone. flew it 6 times today...what a blast! ill put pics up later.
Old Dec 13, 2008, 06:36 PM
martys is offline
Find More Posts by martys
Check your six
martys's Avatar

Pics


Boys tell me how to post pics. I have some of my F22 I'd like to share. Thanks Marty
Old Dec 13, 2008, 06:47 PM
helipilot is offline
Find More Posts by helipilot
Clear for Take-Off!!!
Save the pics to your desktop or folder. When you reply to the thread, scroll down and you will see a box that say's "Manage attachements". Click on the box and you will see buttons to click to open up the folder where your pic's are located. Add them and click the "Upload" button. Post and we can see your sweet looking F-22.
Old Dec 13, 2008, 06:55 PM
martys is offline
Find More Posts by martys
Check your six
martys's Avatar

F22


Thanks for the help with the pics. Here goes. martin
Old Dec 13, 2008, 11:07 PM
adbradley is offline
Find More Posts by adbradley
Registered User
adbradley's Avatar
Dont forget guys, if you dont want to mess with cutting these things out, i have a local guy that laser cuts them for me. $15 each plus shipping.

Adam
Old Dec 14, 2008, 12:28 AM
corsair nut is offline
Find More Posts by corsair nut
fly like an EAGLE ;)
corsair nut's Avatar
i love mine so much, im going to do the larger version, with rudders and a basic full fwd fuse. i think the drooped leading edges, rounded leading edges and all surfaces, and tapered trailing edges contribute to how smooth this thing really flies, i was shocked how smooth it was on high speed runs, for a profile foamie. alot of profiles i have tend to "hunt" up and down in high speed, but not this little, its truly a hoot!
Old Dec 14, 2008, 12:37 AM
helipilot is offline
Find More Posts by helipilot
Clear for Take-Off!!!
Hey Adam,

who do I pay, how do I get one of the laser cut kits?


Corsair, do you have an idea on how to make the full fuse version?
Old Dec 14, 2008, 07:09 AM
martys is offline
Find More Posts by martys
Check your six
martys's Avatar

Build threads & plans


Here you go Boys. Lets build another one! Martin

https://www.rcgroups.com/forums/showthread.php?t=352329

http://www.parkjets.com/F-22page.html

http://www.parkjets.com/free-plans.html
Old Dec 14, 2008, 07:10 AM
martys is offline
Find More Posts by martys
Check your six
martys's Avatar

F22 kit


Yes Adam. Let me know too. Thanks, Martin
Old Dec 14, 2008, 10:17 AM
adbradley is offline
Find More Posts by adbradley
Registered User
adbradley's Avatar
If you are interested in purchasing laser cut kits, pleasse PM me.

ADam


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 3mm White Depron 18 sheets Twinkletoze Aircraft - General - Miscellaneous (FS/W) 1 Sep 06, 2007 10:57 PM
Built up 3mm depron aerobatic/3D??? bcripe1 Foamies (Kits) 4 Sep 03, 2003 09:00 PM
3mm depron CAP MGoddard Foamies (Kits) 3 Sep 01, 2003 08:36 PM
Slice BlueCore into 3mm Depron localbuyer Foamies (Kits) 1 Jul 08, 2003 11:28 PM
For Sale Fs 3mm Depron Sheets CMT1961 Aircraft - Fuel - Airplanes (FS/W) 2 Jan 28, 2003 01:01 PM