Thread Tools
Feb 08, 2009, 03:45 AM
Registered User
i m lucky that i have pat hay pat i change prop from 5*5 apc to 4*7.5 apc and got my power back, i hope that will fly now. 2nd just one quesiton how much you thin motor can be heat? if ran arround 1 mnt it was heated not much but yes was,,,,
Sign up now
to remove ads between posts
Feb 08, 2009, 11:20 AM
Check your six
martys's Avatar

Sr71


Any plans available yet on SR71? I would LOVE to build one! I just happen to have a motor just waiting for a home. Marty

http://www.hobbycity.com/hobbycity/s...Outrunner_(10g)
Feb 08, 2009, 11:22 AM
Check your six
martys's Avatar

My prop


Boys I use a 5X3 prop on mine. Only had to notch the body a little. Didn't affect the airframe at all. It's got plenty of thrust. Marty
Last edited by martys; Feb 08, 2009 at 12:08 PM.
Feb 08, 2009, 12:07 PM
Registered User
adbradley's Avatar
5x3 is perfect for this motor on 3s,

i will get plans up monday
Feb 08, 2009, 12:13 PM
Check your six
martys's Avatar

Plans


Thanks Adam! I can assure you there will be several members in the club (South Jersey Silent Flyers) anxious to build and fly her. It seems like these pusher jet designs are catching on like wildfire! I will post pics and a flight report for you of the build if you would like. Boy, I can't wait! Marty
Feb 08, 2009, 02:32 PM
Clear for Take-Off!!!
AD, Un-real! Looks like I will be downloading another fine plan set from you tomorrow! I cannot wait. Thanks a bunch for such a fine design. It also looks like I better order up some more depron!
Feb 08, 2009, 08:14 PM
Registered User
Hay Pat, asking quesiton again , is there a way before flying you can guess your CG?
Feb 08, 2009, 08:47 PM
Registered User
adbradley's Avatar
Im glad you guys like the sr71, i almost have the f15 done as well.

The sr71 prototype is half built, i will get some pics up asap.

i will take some requests, any other attack or fighter jets you would like to see in my style?
Feb 09, 2009, 01:05 AM
Avoid The Ground!
Flexserve's Avatar
Quote:
Originally Posted by adbradley
5x3 is perfect for this motor on 3s,

i will get plans up monday
That SR-71 looks kool too! Can't wait to build it!

On the 10 gram hobbycity motor with turnigy 10 amp esc..and 3s 610mah 20c should the motor and esc be getting hot?
Feb 09, 2009, 03:59 AM
Check your six
martys's Avatar

Motor


Come to think of it Boys, I think I will opt for the 19 Gram motor since the SR71 looks like it'll be larger. As far as planes, the Mig 15 and the F86 Sabre jet are 2 of my favorites. Marty


http://www.hobbycity.com/hobbycity/s...cro_Motor_(19g)
Feb 09, 2009, 06:59 AM
Registered User
adbradley's Avatar
Quote:
Originally Posted by Flexserve
That SR-71 looks kool too! Can't wait to build it!

On the 10 gram hobbycity motor with turnigy 10 amp esc..and 3s 610mah 20c should the motor and esc be getting hot?

I have not tried that motor, i use the 19 gram motor that martys linked to above. sorry
Feb 09, 2009, 07:03 AM
Registered User
adbradley's Avatar
Quote:
Originally Posted by martys
Come to think of it Boys, I think I will opt for the 19 Gram motor since the SR71 looks like it'll be larger. As far as planes, the Mig 15 and the F86 Sabre jet are 2 of my favorites. Marty


http://www.hobbycity.com/hobbycity/s...cro_Motor_(19g)
It actualy is quite a bit larger, i beleive its going to be to large for this power combo, had to tell when drawing it. so i may have to shrink it down.

there are already some decent designs out there for the mig and saber, i wanna stick with newer jets. i think i may do a mirage 2000
Feb 09, 2009, 09:22 AM
Registered User
adbradley's Avatar
ok guys, here is the sr71 thread with plans posted


https://www.rcgroups.com/forums/show...8#post11542042
Feb 09, 2009, 09:44 AM
Avoid The Ground!
Flexserve's Avatar
Quote:
Originally Posted by adbradley
It actualy is quite a bit larger, i beleive its going to be to large for this power combo, had to tell when drawing it. so i may have to shrink it down.

there are already some decent designs out there for the mig and saber, i wanna stick with newer jets. i think i may do a mirage 2000

oops meant 19 gram..thats the one I have. GWS 4.5x3 prop and everything gets hot..is that overkill on the prop. (Battery is Rhino (Zippy) 610Mah 3s 20c) ESC is Turnagy 10 Amp.
Feb 09, 2009, 09:59 AM
Registered User
adbradley's Avatar
Quote:
Originally Posted by Flexserve
oops meant 19 gram..thats the one I have. GWS 4.5x3 prop and everything gets hot..is that overkill on the prop. (Battery is Rhino (Zippy) 610Mah 3s 20c) ESC is Turnagy 10 Amp.

Shouldnt be, this is the same setup i use.. my motor, esc, and battery get warm to the touch, but not hot enuff that you cant hold your finger on it for sevral seconds..


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 3mm White Depron 18 sheets Twinkletoze Aircraft - General - Miscellaneous (FS/W) 1 Sep 06, 2007 09:57 PM
Built up 3mm depron aerobatic/3D??? bcripe1 Foamies (Kits) 4 Sep 03, 2003 08:00 PM
3mm depron CAP MGoddard Foamies (Kits) 3 Sep 01, 2003 07:36 PM
Slice BlueCore into 3mm Depron localbuyer Foamies (Kits) 1 Jul 08, 2003 10:28 PM
For Sale Fs 3mm Depron Sheets CMT1961 Aircraft - Fuel - Airplanes (FS/W) 2 Jan 28, 2003 12:01 PM