Wattage Mirage 2000-5 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 22, 2001, 05:31 AM
Registered User

Wattage Mirage 2000-5

Have built this one and done a lot of work to get it looking O.K. Maybe I missed something in the English instruction set about routing the Rx aerial....can't find any reference to it. As a beginner to pusher types, what would you guys reccommend i do ?


Sign up now
to remove ads between posts
May 22, 2001, 05:37 AM
Sloping off....
leccyflyer's Avatar
Hi Ray

My mate has his run along the leading edge of the starboard wing secured with a bit of Scotch Magic Tape - that keeps it out of the way of the prop.


May 22, 2001, 12:53 PM
Registered User
bozmonster's Avatar

Thats where I put mine, just run it along the wing so it doesn't hit the prop or control surfaces...........chris

May 23, 2001, 01:14 AM
Registered User
Thanks gentlemen, now you mention it, i fell dumb for asking ! such is a lack of confidence.!!!!!!!!!!!!!!


May 23, 2001, 01:25 AM
Registered User
Clayton's Avatar

Sometimes self-evident questions still need to be answered. Good luck with the mirage. It looks like a cool plane. Definetly be particular with your C.G.!
May 24, 2001, 09:32 AM
Registered User
Hi Ray,
This is a tricky subject. Some people on other threads stuck their antennas on the underside of the wing in a snake-like fashion. I used some wire to thread mine through the core of the wing. There was still about 18 inches (45cm) trailing in the wind which was fine until I stalled doing a loop and it got wrapped around the prop!! Now I've pulled some back into the fuselage so it doesn't reach the prop.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold WATTAGE Mirage 2000-5 ru4real1 Aircraft - Electric - Airplanes (FS/W) 1 Dec 03, 2016 12:26 PM