Thread Tools
Old Dec 21, 2007, 11:06 PM
P. Tritle is offline
Find More Posts by P. Tritle
Registered User
P. Tritle's Avatar
Mini-Review

1963 Lyman Soft Top Sleeper in Review


OK boys and girls, I was going to hold off starting the review thread on the Lyman Soft Top Sleeper until There was substantial progress, but it just didn't work out that way.

Right after dinner, we heard a camotion on the front porch, which turned out to be the UPS man dropping off the kit. The box hadn't even warmed up yet when the top was off and the contents revealed. My first impresion is that this is a very nice kit!

After settling in and spending a little time looking over the plans and instructions I could see that this was going to be a terrific build. The mahogany, ply, and balsa is 100% laser cut, and very nicely done. There were also 4 seperate boxes containing the drive gear, motor, horn kit, and light kit. Upon inspecting the contents I found the components to be of the typical high quality you would expect from Rich Koll and M.A.C.K. Products.

And then, I opened the large box which contained the drive system components, plus all of the hardware and deck fittings, which are nothing short of spectacular -- 35 bags worth of spectacular. My first though was that everything was there but the kitchen sink -- then upon closer inspection I found it in there too!

Before the build begins I need to spend some quality time with the instructions and detail drawings to become familiar with the building sequence. At first glance, the kit is almost intimidating, simply because there's so much of it. But from what I've seen so far, the instructions and detail drawings appear to be well laid out, so the build should go well also.

Can't wait to get started!

PAT
Sign up now
to remove ads between posts
Old Dec 22, 2007, 12:07 AM
Aerominded is offline
Find More Posts by Aerominded
Registered User
Hey! no fair!!! yours made it to your doorstep before mine!!!

I'll be watching closely!
Old Dec 22, 2007, 12:11 AM
P. Tritle is offline
Find More Posts by P. Tritle
Registered User
P. Tritle's Avatar
Aero, Sorry, just the luck of the draw I guess.

PAT
Old Dec 22, 2007, 12:18 AM
Aerominded is offline
Find More Posts by Aerominded
Registered User
Hee hee, I've been watching these being delivered... First Maine, then TN, next NM... CA must be next!!!
Old Dec 22, 2007, 09:14 AM
papower is offline
Find More Posts by papower
Registered User
papower's Avatar
I was scared off by the $350.00 price tag. But since it comes with ALL of those extras then it seems justified. I had no idea that it came with motor, lights, horn, ect.
Bruce
Old Dec 22, 2007, 09:31 AM
420TEE is offline
Find More Posts by 420TEE
Registered User
Papa, The motor, lights, horn are optional, not part of the kit. It shows this on the MACK website.
Old Dec 22, 2007, 10:17 AM
P. Tritle is offline
Find More Posts by P. Tritle
Registered User
P. Tritle's Avatar
Bruce, I agree, $350.00 sounds like a big chunk, even though the kit doesn't include the motor, ESC, but it does include and all the drive system components. Plus, the deck fittings are far nicer then you can imagine without seeing them. This is a nice kit, and even at that price. it looks like a bargain to me. And just look at all the hours of enjoyment the kit will bring in both building, and running.

Aero, maybe the UPS Guy dropped of my kit on the way to your house. It does appear he's moving westward!

PAT
Old Dec 22, 2007, 02:16 PM
Ray Farina is offline
Find More Posts by Ray Farina
Ray Farina
I have seen two of them up in his shop. AND BOY they are two beautiful models. I have taken regular photoes of all of the models that he had completed about two years, so he could show off his work. I gave him both the pictures in a book and the negatives. I had used a professional film that was for vivid color and they certainly did his models justice.
Old Dec 23, 2007, 11:09 AM
frankg is offline
Find More Posts by frankg
Registered User
I thought I would clear up any confusion on the power package and light package for the LYMAN kit. Both packages are optional for the boat kit and can be purchased separately. The light package that PAT received for the review is the complete package, but the power package for the review did not included the ASTRO FLIGHT #208D electronic speed control which is in the package. Since Pat already had a speed control from a previous build I saw no reason to duplicate. If any one wished to use their speed control for their model they could order the rest of the power package components separately from MACK. I must stress that at MACK what we say is the truth, and when we recommend something it is because we have tested it and it meets our standards.
Old Dec 23, 2007, 03:03 PM
Aerominded is offline
Find More Posts by Aerominded
Registered User
I've always been pleased with the service/products I've recieved from MACK!
Old Dec 23, 2007, 04:33 PM
Bud Faulkner is offline
Find More Posts by Bud Faulkner
Registered User
Bud Faulkner's Avatar
All right you guys! Now don't make me sell my new SR eindecker I just finished and buy one so cut out the excitement!!

Bud
Old Dec 23, 2007, 05:58 PM
Kmot is offline
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
Quote:
Originally Posted by Bud Faulkner
Now don't make me sell my new SR eindecker
Bud
I am always surprised to learn that model boaters are also model airplane drivers. Why does that surprise me? I don't know, as I am an airplane driver as well as a model boat driver.

As well as a r/c car driver, motorcycle driver, stadium truck driver, monster truck driver, hovercraft driver, armor tank driver, armor LAV driver.
Old Dec 23, 2007, 06:30 PM
Bud Faulkner is offline
Find More Posts by Bud Faulkner
Registered User
Bud Faulkner's Avatar
Quote:
Originally Posted by Kmot
I am always surprised to learn that model boaters are also model airplane drivers. Why does that surprise me? I don't know, as I am an airplane driver as well as a model boat driver.

As well as a r/c car driver, motorcycle driver, stadium truck driver, monster truck driver, hovercraft driver, armor tank driver, armor LAV driver.
I think KMOT has too much time on his hands.

Bud
Old Dec 24, 2007, 12:07 AM
Kmot is offline
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
LOL, well you know not all at the same time. Most are collecting dust but they are there if I want to run them.

Okay, back to Pats build thread on the Lyman. Sorry Pat!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 1963 Lyman Kit in November Swift16 Scale Boats 8 Sep 26, 2007 02:40 PM
User Title in review feedback section.. Andy W Site Suggestions / Complaints 2 Sep 27, 2005 03:06 AM
Rant Blonde: Year In Review Don Sims Humor 0 Jul 09, 2005 07:07 PM
Cloth/fabric for soft top epilot Life, The Universe, and Politics 7 Nov 29, 2004 03:22 PM