Thread Tools
This thread is privately moderated by drfish, who may elect to delete unwanted replies.
Dec 04, 2007, 12:41 AM
Registered User
Thread OP
Discussion

On The Bench


Ok, So now that the bench and workshop/office are back in shape, it was time to return to my very long running scratch build project. Because of my on again off again, I dont have a true "build log" but here are some shots of where it is now.

Basic low wing aerobatic plane, you will see reminders of several other planes here - lots of style queues from some of my favorite planes.

wingspan is 40", length will be about 38-40 (havent quite settled the cowl length yet). Hoping for an AUW around 25 oz. Intended power changes daily, but will most likely be powered by 4s A123 1100 cells. If I dont have the 123's yet I may just power it with 3s2100 Tanic Packs I have laying around. Will be trying witheither a Himax 2025-5300 and 6.3:1 cobri, or a Hyperion X-22-L and 4.5:1 gearbox from a 3-DeLight. Or, a new motor, if none of those is making me happy..
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
In air flying amps vs. on bench amps rplourdejr Power Systems 6 Apr 19, 2005 12:01 PM
LiPoly capacity ,on the bench / in the air. everydayflyer Batteries and Chargers 3 Mar 15, 2005 08:13 AM
"Home Grown" on the Bench zorromister Foamies (Kits) 7 Feb 14, 2005 11:56 AM
Info Needed on Bench Running Marine Engine iamplanecrazy2 Dock Talk 0 Nov 01, 2004 12:19 AM
How to get consistent power on the bench? ClayH Power Systems 5 May 18, 2003 08:51 PM