Carbon Testing Part 2! Hollow Molded Monster! - Page 129 - RC Groups
Thread Tools
Jan 20, 2010, 07:56 PM
Registered User

What the ???


Joe your nuts, I like the PPG Paints also but painting your thermometer, thats just a bit much.


Jeez
Sign up now
to remove ads between posts
Jan 20, 2010, 08:05 PM
Stay in it!!!!
Quote:
Originally Posted by Air Head
Joe your nuts, I like the PPG Paints also but painting your thermometer, thats just a bit much.


Jeez
Good one!
Jan 23, 2010, 05:19 AM
Needs to do 52 legs !!
jjmouris's Avatar
Joe, thanks for all the build info in this thread.

It is real good to see how you do it.

Joe
Jan 25, 2010, 12:59 AM
Objects in mirror are losing
1000MPH's Avatar
Wonder if these would fit?
Jan 25, 2010, 10:05 AM
Stay in it!!!!
They will definitely fit. Not sure if they are available yet.
Jan 25, 2010, 03:03 PM
Registered User
Dennis Everett's Avatar
Joe ,where are the control horns in relationship to the wipers ? when you glue in your control horns , what kind of epoxy do you use ? And where can you get it ? Dennis
Jan 25, 2010, 09:19 PM
Stay in it!!!!
Dennis, I use Gorilla CA for my horns. That glue is far superior to regular CA. It's important to have a nice fit in order to get good strength. If the gap is too big then I would use at least 30 min epoxy with some cabosil or milled fiberglass.
Jan 27, 2010, 04:49 PM
There is only DS
airtimeasto's Avatar

Luv ya work


Thanks Joe, I've reading ur threads and I've learnt heaps on mouldy construction. I didn't know how to make wipers until now. Keep up the great work. You're a big inpiration to my building DSers, I've got a long way to catch up though.
There was another thing I'm not sure about how the thickness of the main wing spars are measured from root to tip?
Cheers Asto
Mar 11, 2010, 01:55 PM
Registered User
KurtMc's Avatar
How's the big gal coming Joe? Maidened already?
May 18, 2010, 11:08 PM
Stay in it!!!!
Getting her ready for the big show. Ive been waiting for these servos for a while now. They are finally here. These things actually make the 7955tg's seem like toys. They are far superior. Even with a load they can find center and quiet down where the smaller counterparts sometimes need a wiggle to shut up. These are strong and seem up to the task.
May 18, 2010, 11:13 PM
Stay in it!!!!
Just about have the wing sorted. I already have the elevator hooked up. I might be flying it this weekend.
May 18, 2010, 11:23 PM
407mph P.B...Going 4 500mph!
_Sloper's Avatar
Nice!!! Shes coming along, lookin' good....man those 7980 are beefy!
May 18, 2010, 11:31 PM
Stay in it!!!!
Getting the rest of the stuff together. I added 10lbs of weight to each wingtip. I should be able to add about 15 to 20 lbs inside the fuse. I reinforced the fuse layup where the tongue plugs in and the wing holddown nut as well. I used a 3"x3"x1/8" steel plate with a grade 8 nut welded to the back. This is glued to the underside of the 1/2" plywood under the wing. Should be good to go.
May 18, 2010, 11:41 PM
registered user
holy smokes that looks impressive.... Can't believe 3 battery packs and a big computer box thingy and 10lbs to each tip !!!!!!!! Always amazing to see how you do it.
May 18, 2010, 11:52 PM
Say when.....
quigley257's Avatar
Awesome as always Joe!! Can't wait for a flight report.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Yippee! It'll NEVER FLY!!! All carbon, hollow molded... winchdoc Slope 37 Jul 10, 2008 10:10 PM
Alert Testing the WM600 (part 2) winmodels Electric Ducted Fan Jet Talk 184 Apr 14, 2005 06:48 PM
Wanted: Carbon bagged or hollow molded HLG CDignition Aircraft - Sailplanes (FS/W) 0 Feb 03, 2004 07:48 PM
Jim Bourke's Moving Sale Part 2 -- Brushless motors jbourke Aircraft - Electric - Airplanes (FS/W) 1 Aug 07, 2001 03:00 AM
MIA's 12" House FLY Sub-Micro! NEWS!!! (Part 2) MicroRotors Electric Heli Talk 10 Jul 27, 2001 04:19 PM