Thread Tools
Nov 27, 2007, 04:30 PM
Registered User
Dear Scott and Motrofly USA,

I would love to win the fifth prize; the motor looks to be an excellent choice for the park flier type planes that I like to fly.

I think that I should be chosen as the winner of the Motrofly USA DM-2210 motor, FM-20 controller and program card. I would be honestly grateful and would put it to good use. Winning the contest would enable me to add a new airplane to my small hangar or upgrade my stock GWS Beaver. Having a new airplane to bring to the Fly-In at Chilliwack BC this spring would be great!

I think I would be a good advocate for your company. I do my best to represent this hobby in a good way. I fly responsibly, enjoy talking with spectators, and often take an Air Hogs biplane to let kids try out. Spectators always ask what powers my models, and I love to tell them.

The chance to experience your power systems would be great. I am helping two new pilots learn to fly with good success and have inspired a few of my co-workers to take up the hobby. When they ask for advice about their next planes and equipment, you can be sure that your company will be part of the conversation.

Lastly, I hope that I win the fifth prize because, like everyone else here, I love to fly. I hope that I will be flying with one of your power systems soon.

Sincerely,
ColinB
Last edited by ColinB; Nov 27, 2007 at 04:36 PM.
Sign up now
to remove ads between posts
Nov 28, 2007, 02:59 AM
3d and EDF, some scale
MustangAce17's Avatar
Scott, I wish to pull myself from the 5th motor contest. I simply do not need it and am very fortunate to have quite a few brushless set-ups,still need to try a motrolfly someday soon. I would like to see Colin receive it since he could really use it and I think we look somewhat alike
Nov 28, 2007, 12:38 PM
Timelord
Doctor Who's Avatar
Quote:
Originally Posted by MustangAce17
Scott, I wish to pull myself from the 5th motor contest. I simply do not need it and am very fortunate to have quite a few brushless set-ups,still need to try a motrolfly someday soon. I would like to see Colin receive it since he could really use it and I think we look somewhat alike
You could be brothers looking at the two pictures.

Colin- Looks like a nice place to fly.
Nov 28, 2007, 12:53 PM
3d and EDF, some scale
MustangAce17's Avatar
they say everyone has a twin Jay hmm. BTW not moving to OK,decided to look more into schools here,I'm having a edf jet meet at Ocala Dec. 8th,hope you can make it
Nov 28, 2007, 05:13 PM
I'm Just a Girl
maybe...but you're cuter kyle
Nov 28, 2007, 06:38 PM
Registered User
Quote:
Originally Posted by Doctor Who
You could be brothers looking at the two pictures.

Colin- Looks like a nice place to fly.
We do look a little alike; similar build I guess!

Chilliwack sure is a nice place. Some people's back yards are larger than others! The people make the event; the scenery is just a bonus. It takes a two hour ferry trip and a few hour drive for me to get there, but it is worth it. (Hoping for no rain next year!)

Here's a shot from the float flying pond. I don't like what it shows about my landing skills, but I do like the scenery! (It WAS windy that day...)

Colin
Nov 30, 2007, 05:59 AM
www.ReaperBrushless.com
The Reaper's Avatar
Thread OP

Motrolfly mystery WINNER


dear rc groupies

after looking over all the entries it was a tough choice it was left upto two contestants Holtenbacker and colinb so being the lunitick that i am they both win. please contact me with your shipping address via pm. thanks for joining in guys.

winners

Holtenbacker Dm2210 1080kv combo
ColinB DM2210 1080kv combo

scott
www.motrolflyusa.com
Nov 30, 2007, 12:00 PM
Registered User
Woo hoo! That is great! Thank you Scott!

Colin
Nov 30, 2007, 07:54 PM
Registered User
Holtenbacker's Avatar

THANK YOU
Nov 30, 2007, 11:57 PM
Registered User
billsmithjr's Avatar
Congrats to the well deserving winners!
Dec 01, 2007, 01:38 AM
Tree Antagonist
BobOD's Avatar
Hey, I got my DM2205 1350kv and FM10

Looks pretty nice except they forgot the two screws for the prop adaptor to hook the o-ring to.
Anybody happen to know the size of this screw? I can't find any information in the documentation.
Dec 01, 2007, 02:25 AM
Registered User
Holtenbacker's Avatar
Quote:
Originally Posted by BobOD
Anybody happen to know the size of this screw?
What I do, if I don't know or can not find the screw / nut size.
Take it to Ace or True Value Hardware and try till it fits.
Most probably metric.
Dec 01, 2007, 03:49 PM
www.ReaperBrushless.com
The Reaper's Avatar
Thread OP

screws


dear bob

3mm is the size i already shipped out qty of 4 to you sorry about that.

scott
www.motrolflyusa.com


Quote:
Originally Posted by Holtenbacker
What I do, if I don't know or can not find the screw / nut size.
Take it to Ace or True Value Hardware and try till it fits.
Most probably metric.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert Motrolfly USA New Motor KV The Reaper Power Systems 1 Sep 16, 2008 09:13 PM
Article Motrolfly USA DM2215 Brushless Motor and 20 amp ESC Review Michael Heer Power Systems 5 Oct 22, 2007 04:07 AM
Cool Motrolfly USA The Reaper Vendor Talk 7 Oct 15, 2007 12:19 AM
Discussion Motrolfly USA ESC Programming Card The Reaper Power Systems 0 Sep 29, 2007 06:22 AM
Joke AMA's "Guess the Plane" Contest scratchandbash Humor 12 Dec 11, 2006 12:27 PM