Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 07, 2008, 02:41 PM
Registered User
CCbusa05's Avatar

Eta ?


Does anyone know when we might expect the SRB Quark to reach US vendors?
Sign up now
to remove ads between posts
Jan 09, 2008, 06:59 AM
FG
FG
Registered User

hirobo quark..?


Tim Sandor (tim@modelrectifier.com)
Sent: January 4, 2008 6:33:13 PM
To: dougie_30@hotmail.com.....(thats me)

We're expecting to receive it by end of February to mid March, although we haven't done any "official" product announcements yet. We're expecting the cost to be around the $400 mark, but again, nothing is official yet. Keep an eye on our website for more information.

Tim Sandor
Jan 09, 2008, 12:26 PM
Scarecow
HoverBovver's Avatar
Quote:
Originally Posted by TachyonDriver
Hope the cheap copy gets rid of the TAIL MOTOR and just uses variable pitch tail blades, geared from the mains..

Tach.
Then it'd be an hornet....so temperamental, hard to setup as well as expensive.
Jan 09, 2008, 03:40 PM
Registered User
CCbusa05's Avatar
Quote:
Originally Posted by douglas4
Tim Sandor (tim@modelrectifier.com)
Sent: January 4, 2008 6:33:13 PM
To: dougie_30@hotmail.com.....(thats me)

We're expecting to receive it by end of February to mid March, although we haven't done any "official" product announcements yet. We're expecting the cost to be around the $400 mark, but again, nothing is official yet. Keep an eye on our website for more information.

Tim Sandor
Thanks bro.................I will be getting one!
Jan 15, 2008, 03:34 AM
Beautiful burnout~
Circlewave's Avatar
Heya,

Found some pics of the Hirobo Quark in the January issue of RC Air World magazine from Japan. Looks awesome! Pricey, but there's no denying Hirobo quality. I want it. Love the Lepton-like canopy.
Last edited by Circlewave; Jan 15, 2008 at 03:40 AM.
Jan 15, 2008, 04:48 AM
Scarecow
HoverBovver's Avatar
Good find and from the 2nd & 4th photo we know for certain that the main motor is a brushless outrunner....presumably the tail is still going to burn though.
Jan 15, 2008, 10:52 AM
Registered User
Interesting but the price is a bit high, this thing is going to compete with the blade 400 with a spectrum radio. Maybe if they offered it without radio and a 3 in 1 it would make more sense.
Jan 15, 2008, 02:05 PM
Easily amused
CaptainIglo's Avatar
That flybar is not 90 degrees. It looks it is at the same angle as the flybars on top of the coaxials. Perhapse this his one uses some of the same stabilizing techniques with weights mixed with normal paddles.
Jan 15, 2008, 03:05 PM
Registered User
CCbusa05's Avatar
Thanks for posting those pics Circlewave!!
I'm really excited about this one, can hardly wait until I can get my hands on one, no matter what the price. Hopefully they'll be here in the US by early February. I noticed the same thing about the flybar angle being at approx 45 degrees from the main blades rather than 90 like a conventional FP which allows it to hover somewhat hands off like shown in one of the home page videos. Just what I need, that extra second to make cyclic corrections when the orientation in my old brain gets confused!!
What intrigues me, among other factors, is it appears to be small enough and somewhat easier to control so should make a good indoor flyer as well as outside during somewhat windless days.
Jan 15, 2008, 03:57 PM
Registered User
Everybody's like, why buy cheap when you have to mod and mod to get a really good heli, why not pay several hundred dollars for quality?

Where's the fun in that? Next to flying, working on my helis is what I love best!
Jan 15, 2008, 06:34 PM
So is the s.r.b. out yet?
where can i get one ? in the u.s.a. ?
they are NOT on the MRC site!
-john
Jan 15, 2008, 08:08 PM
oops! just noticed they said end of feb or march in the usa.
-john
Jan 15, 2008, 09:13 PM
No Shill Zone
Deserteagle's Avatar
I'm sure it's a nice heli but from the pics of the flybar I can tell you it will snap on impact. Hope I'm wrong but I'm just looking at it and it looks like a bad design. $400 is not a bad price if you get $400 worth of fun out of it. So far I have 4 heli's and out of them so far I love my honey bee FP because the damb thing can take a beating and snap back together and keep flying. My Honey bee king.. umm not so much. I'm not really into 3D and am just really looking for a nice heli that is simple and fun to fly. So far the HBFP does it for me. It flys in 5-10mph wind and after a crash I just snap the head back on, check to see if the blades are tracking and fly again.

If this bird can do that and fly better than the 64#C1 walkera's then I'll buy it.
Jan 15, 2008, 10:45 PM

i agree


Quote:
Originally Posted by Deserteagle
I'm sure it's a nice heli but from the pics of the flybar I can tell you it will snap on impact. Hope I'm wrong but I'm just looking at it and it looks like a bad design. $400 is not a bad price if you get $400 worth of fun out of it. So far I have 4 heli's and out of them so far I love my honey bee FP because the damb thing can take a beating and snap back together and keep flying. My Honey bee king.. umm not so much. I'm not really into 3D and am just really looking for a nice heli that is simple and fun to fly. So far the HBFP does it for me. It flys in 5-10mph wind and after a crash I just snap the head back on, check to see if the blades are tracking and fly again.

If this bird can do that and fly better than the 64#C1 walkera's then I'll buy it.
i have the walkera 64#c and it's never flown right. even with a spektrum reciever and tlebee gyro. what a waste of money!!
if i could get this one in the usa and get parts i will get it.
-john
Jan 16, 2008, 01:06 AM
Registered User
The Havoc heli uses a similar design on the flybar. I guess this is an auto stabilization technique that requires no extra electronics.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product FP micro heli from HIROBO cvlex Mini Helis 0 Nov 15, 2007 05:42 AM
Coaxial rotor indoor heli from Hirobo!!!! totalboss Micro Helis 9 Jan 17, 2007 04:07 PM
Zoom 400 3D: a new micro heli from Belgium joggerke Mini Helis 12 Jan 30, 2004 05:00 PM
FS/T HORNET FP Micro Heli and Many Parts JoeR Aircraft - Electric - Airplanes (FS/W) 5 Oct 15, 2003 07:37 PM
Altitude control for FP micro-heli jeffs555 Micro Helis 2 May 19, 2003 07:11 PM