New Products Flash Sale
Thread Tools
Old May 11, 2008, 08:55 PM
Alvaro Silgado is offline
Find More Posts by Alvaro Silgado
Registered User
Alvaro Silgado's Avatar
Hi,

I'm trying to do my own EVO 2.GHz conversion with a FASST TM-7 module. I'm not an expert on electronics, but with the help of cp1 and mmormota (thank you VERY much!), I have my first schema for the adaptation. It seems this module is easier to adapt since the original Futaba radio module socket drives the module input with open collector (I don't know exactly what it means, but mmormota says so ).

Now, I have a lot of questions:

1. Is this schema correct?
2. Are the values of the resistors correct?
3. Why to lower the voltage from 9v to 6.1v (due to my resistor's values) at the transistor's base? The base is supossed to act as a trigger with ANY value, isn't it?
4. Is this schema still necessary if I use a negative shift on the EVO?

Thank you very much and sorry for too much questions.


Alvaro.
Last edited by Alvaro Silgado; May 12, 2008 at 05:44 PM.
Sign up now
to remove ads between posts
Old May 12, 2008, 05:31 PM
Alvaro Silgado is offline
Find More Posts by Alvaro Silgado
Registered User
Alvaro Silgado's Avatar
IT WORKED!!!

Everithing is working perfectly, even the failsafe works OK. I haven't tried it outside home, but it is suppossed to work.

Thank you very much for your help (specially, cp1 and mmormota). This solution is simple and functional.

Now, the last question: will the same schema work with more advanced modules, like TM-10 or TM-14?

Cheers,


Alvaro.
Last edited by Alvaro Silgado; May 12, 2008 at 05:37 PM.
Old May 13, 2008, 08:00 AM
arocholl is offline
Find More Posts by arocholl
Electric powered
arocholl's Avatar
Quick question guys: is the "trainer port" connection version working for more than 5 channels? I'm asking because as far as I know, EVO9 trainer port only controls 5 channels, but I may be wrong...
RCG Plus Member
Old May 13, 2008, 08:23 AM
cp1 is offline
cp1
Find More Posts by cp1
cp1
Registered User
The trainer port connection works for up to 8 channels, because it uses PPM format. It is not suitable for the M-10 and the M-14.
Old May 13, 2008, 09:37 AM
mmormota is online now
Find More Posts by mmormota
Registered User
mmormota's Avatar
Quote:
Originally Posted by cp1
The trainer port connection works for up to 8 channels, because it uses PPM format. It is not suitable for the M-10 and the M-14.
The necessary signal for the TM10-15 is a known format? Maybe it can be done using a uC...
Old May 13, 2008, 10:23 AM
Alvaro Silgado is offline
Find More Posts by Alvaro Silgado
Registered User
Alvaro Silgado's Avatar
Quote:
Originally Posted by arocholl
Quick question guys: is the "trainer port" connection version working for more than 5 channels? I'm asking because as far as I know, EVO9 trainer port only controls 5 channels, but I may be wrong...
Hola Arocholl

Yes, it works perfectly with the 7th channel. Is the simulator cable what only works with 4 channels.

Un saludo,


Alvaro.
Old May 13, 2008, 10:42 AM
arocholl is offline
Find More Posts by arocholl
Electric powered
arocholl's Avatar
Quote:
Originally Posted by Alvaro Silgado
Hola Arocholl

Yes, it works perfectly with the 7th channel. Is the simulator cable what only works with 4 channels.

Un saludo,


Alvaro.
Hola Asilgado

Thanks for the info. I got info from some other sources that PPM output is ok till the 5th channel, but not beyond, as apparently you couldn't select "trainer" channels beyond 5th. But I never checked that. So it's nice to know that was not the case.

Gracias illo.

Ariel
RCG Plus Member
Old May 13, 2008, 02:07 PM
Alvaro Silgado is offline
Find More Posts by Alvaro Silgado
Registered User
Alvaro Silgado's Avatar
Confirmed: it also works on the 4000.

Cheers,


Alvaro.
Old Jun 07, 2008, 09:15 PM
chewytm is offline
Find More Posts by chewytm
Registered User
Hi,

Has anyone done a similar mod with the 9-12 ch versions of the modules. Maybe internal and not thru the trainer port?

chewy
Old Feb 05, 2009, 09:34 AM
darkfa8 is offline
Find More Posts by darkfa8
Registered User
darkfa8's Avatar
I'm following all these Multiplex Spektrum and FASST conversion articles with great interest.

With Multiplex set to debut their 2.4 version of the EVO radios over the next few days at Nuremburg, I'm curious to see whether or not it will be or can be used with FASST or Spektrum or something proprietory.

I've been a FASST user, but am contemplating a new transmitter for heli use.

I guess the course of these threads may change after we see what Multiplex will do. Maybe they'll make conversion modules for the FM transmitters.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Yet Another Aero Ace/X-Twin Conversion JRuggiero Scratchbuilt Indoor and Micro Models 5 Mar 30, 2006 09:46 AM
Cool Yet another Raptor conversion kit! Ben74 Electric Heli Talk 26 Aug 12, 2005 12:05 AM
Discussion Yet another Dumas Do335 arrow conversion C. Alan Scale Kit/Scratch Built 5 Dec 30, 2004 10:40 AM
Yippee! Yet Another Floatplane Conversion: Headwind B FLYWINGFAN Parkflyers 5 Jun 19, 2004 12:08 AM
Yet Another Foamie Conversion t-turley Scratchbuilt Indoor and Micro Models 7 Apr 18, 2002 06:27 PM