Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 27, 2012, 02:15 AM
Registered User
Hi Guys. Thanks for a great thread. I've just ordered a BC Strong from Bob at SUSA and was thinking of putting some MKS 6125 mini servos in the ailerons and 2 for the tail elements. Full size 6125s for the flaps. I am planning on using those ali servo frames with a 3rd bearing in the wing servos. Anyone see any issues with this setup?

Thanks in advance!

Brett
Sign up now
to remove ads between posts
Feb 27, 2012, 06:49 AM
Detail Freak
target's Avatar
Love the metal mounts and full size 6125's in my 4.0m Xplorer; I see no issue with the same in the Ceres.
You may have to change the horn arrangement as other have (Dieter, I think) in the past for best geometry.

R,
Target
Feb 27, 2012, 09:56 AM
Eagle Butte User
PDX Slope Pilot's Avatar
+1 on the metal mounts; they're really slick. Target is correct - the flap horns are below the surface and really benefit from being raised a little to avoid flutter issues. It is also recommended you box in the servo bays.

Good luck and enjoy it! They fly great.

Best,

Victor
Feb 28, 2012, 02:48 AM
Registered User
Thank you gentlemen for your feedback. Will build to the standards in this excellent thread. Keep you posted. Cheers. Brett
Mar 13, 2012, 04:14 AM
Registered User
My Big Ceres Strong just arrived . Couple of interesting findings: this one has RDS!! All the gear is provided so let's see how my first RDS setup goes...
It also doesn't have have provision for ballast in the wings like I believed all string versions have. No carbon rovings in the fuz either. Will check with Bob at SUSA.
Build quality is A1.
Let me know if you have experienced the above.

Thanks!!
Mar 13, 2012, 08:30 AM
making my own planes...
decones's Avatar
Same as here, no carbon in fuse, I just don't remeber if I have ballast holes in the wing...
but, with this plane weighting 4-5kg you won't need ballast hehe

Andre
Mar 05, 2013, 05:07 PM
stuck in ol' Uffni again...
ShredAir's Avatar

uuuh...gleee!


Iím keeping this thread alive, because I like this plane. Itís a true sloper (too big and heavy for any F3 flying), and itís perfect for up here in them thar Andes. Itís my most-flown plane here. With the Big Ceres, Jiri Baudis has created a nice slope machine, which can pound through compression on coastal slopes just like it can utilize inland thermals.
So why ugly? -- On Saturday, during itís 153rd flight here in Colombia, it had a high-speed mid-air with a flock of birds, and the D-tube of the wing has suffered substantial damage; the spar remained intact. Iíve forced the D-tube back into shape (mostly), fixed some of the jagged carbon with CA, covered the gashes and holes with some taped on card stock, and slapped sign vinyl over that; see the photos.
I flew it again today, and the loss in performance is quite noticeable (as one would expect). Itís somewhat akin to driving around with the parking brake applied. It still flies, of course, no bad habits, just trying to tell me it is ready for retirement.
Gladly, it looks like I will get to replace it soon. Personally, I think the wing is sufficiently deformed to not warrant better repair attempts.

Dieter Mahlein, ShredAir
Mar 05, 2013, 06:54 PM
making my own planes...
decones's Avatar
Hi Dieter,

it seems that your plane had gone all his nine lives hehe...
really cool to see someone taking it for that long and still enjoy it, very good plane..
I have the electric version but it's big and heavy for my small apartment, that's why I'll let it go, PM if you're interested

Andre
Mar 06, 2013, 01:48 PM
stuck in ol' Uffni again...
ShredAir's Avatar
Andre, you're not supposed to fly the BC in your apartment... : )
Thanks for the offer, but I'm lucky to not need expensive motors for nose weight where I fly; I'll be getting another pure glider version.

Dieter Mahlein, ShredAir
Mar 06, 2013, 02:10 PM
Certifiable User
killercando's Avatar
Sounds like a Hitchcock moment! Hope you got dinner out of the deal...
Sep 30, 2013, 07:26 PM
making my own planes...
decones's Avatar
Flew my Big Boy last weekend, 5kw setup and woww
That Big Boy loved Big power, it became a monster liner and it
Glide amazing well in thermal. I really recomend Big power for
This toy, go for it! Only concern is about wings linkage, it should be
Solid as rock, just like my ds planes
Jul 04, 2014, 09:06 AM
Eagle Butte User
PDX Slope Pilot's Avatar
Baudis Skywalker

http://www.baudismodel.com/models/k1...alker-new.html
Jul 04, 2014, 09:36 AM
Detail Freak
target's Avatar
Nice!
Jul 04, 2014, 10:22 AM
stuck in ol' Uffni again...
ShredAir's Avatar
Arrrgh, PDX, whatcha doin'??! Ain't you s'posed to be flippin' burgers and shootin' off fireworks? Now I have to figure out where to find the dough to buy one of these, and how to haul it from Germany or get it shipped from SUSA. Thanks a lot! And happy 4th... : )

Dieter Mahlein, ShredAir
Jul 04, 2014, 12:32 PM
Detail Freak
target's Avatar
I can't wait to hear how it compares to the big Ceres.
R,
Target


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Tools you can't live without. Jim McPherson Electric Plane Talk 85 Mar 27, 2017 02:39 PM
Michael Moore says you can't be a democrat... lrsudog Life, The Universe, and Politics 54 Apr 17, 2003 10:32 PM
You can't beat Servo City Sal C Vendor Talk 4 Nov 19, 2001 08:03 AM
Here's a foamie you can't pass up! Greg Covey Foamies (Kits) 6 Sep 26, 2001 09:42 AM