Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by galaxiex, who may elect to delete unwanted replies.
Old Oct 28, 2007, 11:31 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
Discussion

Easy Star Build


Well I'm not quite done yet but here's some pics of my EZ* under construction...
Last edited by galaxiex; Dec 20, 2007 at 11:20 PM.
Sign up now
to remove ads between posts
Old Nov 03, 2007, 06:04 PM
airheli1201 is offline
Find More Posts by airheli1201
Registered User
very nice EZ.
is this ur second??
Old Nov 03, 2007, 07:22 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
this is the first and only one I have bought... so far...
Old Nov 03, 2007, 07:36 PM
airheli1201 is offline
Find More Posts by airheli1201
Registered User
then that is a pretty well planed construction
i saw your fleet in your profile and all the planes are very nice. i am a newbie and i took a
long decision between skyfly and slowstick before deciding to get the EZ. so you not planning to put aileron on it?

the guys would love to see your plane at the Multiplex EasyStar 2007 forum.
don't forget post a video of your maiden!!!
Old Nov 03, 2007, 07:36 PM
airheli1201 is offline
Find More Posts by airheli1201
Registered User
i like the landing gear
Old Nov 03, 2007, 09:30 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
Quote:
Originally Posted by airheli1201
then that is a pretty well planed construction
i saw your fleet in your profile and all the planes are very nice. i am a newbie and i took a
long decision between skyfly and slowstick before deciding to get the EZ. so you not planning to put aileron on it?

the guys would love to see your plane at the Multiplex EasyStar 2007 forum.
don't forget post a video of your maiden!!!
Thanks very much!

I'm still very new at this too...

I did alot of reading and looked at all the mods others had done, before starting on mine, so I had a pretty good idea of what I wanted to do.

When I get it finished (or at least ready for maiden) I will probably put a link, or post some pics, on the EZ* thread.

I don't plan on doing ailerons on this one. Maybe if I get a 2nd EZ* I might do that one.
The plan for this EZ* is to do FPV flying and I thought... simpler might be better.

Good choice getting the EZ*, a Slow Stick is great too.
If you read my blog than you know what I think of the SkyFly...
Old Nov 03, 2007, 09:33 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
Quote:
Originally Posted by airheli1201
i like the landing gear
Thanks again!

I do think I made a mistake in using a carbon tube for the main support in the fuse...
I have the feeling it may crack on a hard touch down.
If I were to do that over I would use a brass tube there too, like the front support...
Old Nov 04, 2007, 05:37 PM
airheli1201 is offline
Find More Posts by airheli1201
Registered User
hey
what is that wooden layout thing in the fuse for??? haven't seen that mod...
Old Nov 04, 2007, 06:03 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
Quote:
Originally Posted by airheli1201
hey
what is that wooden layout thing in the fuse for??? haven't seen that mod...
ply reinforcement for the landing gear.
the brass tube is for the front part of the L/G wire...
the way I land it may not be enough!

want to be able to ROG/Land on hard surface without getting "belly rash"

I know, I know, I could use tape on bottom of fuse. I just like planes with L/G.
Last edited by galaxiex; Nov 04, 2007 at 06:11 PM.
Old Nov 04, 2007, 06:17 PM
airheli1201 is offline
Find More Posts by airheli1201
Registered User
oh i see..
i just belly mine with tape. but i would like to take off with a LG if i had it.
what battery are you planning on using??
Old Nov 04, 2007, 06:34 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
well... I bought a Thunder Power 3 cell 2200 mah but it is too light,
even with the batt all the way forward, still tail heavy.
I don't want to add any dead weight so...
gonna have to see how much more it will take to balance,
try to find a batt that fits and is heavy enough.
I do have some nimh it will balance with but really want to run a lipo...
Old Nov 04, 2007, 06:45 PM
airheli1201 is offline
Find More Posts by airheli1201
Registered User
2200mah is still too light??
i might get a 3000mah then...
but you are doing FPV anyway so your camera should add some weight to balance it.
Old Nov 04, 2007, 08:45 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
yes, the camera will add weight to the front but I plan to maiden without the cam...
guess I could add the dead weight to simulate the camera gear...

for flying without the camera I was thinking 3300 or 3600 mah

my EZ* may be more tail heavy than stock...

I did add a balsa rudder and elevator...
Old Nov 05, 2007, 05:30 AM
airheli1201 is offline
Find More Posts by airheli1201
Registered User
3300 or 3600 will give you so much flight time...
i heard some people can get nearly an hour of mixed flight time with just the 2200mah.
hey how heavy is your 2200mahh batt?? 3600 is about 260g so see if that will balance it.
Old Nov 06, 2007, 09:15 PM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
The Thunder Power 2200 batt weighs 6.1 oz. 174 gr.
I have not checked yet to see what it will take to balance the EZ*.
been busy with R/L stuff...

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Easy Star - what's needed to build one rwmson Foamies (Kits) 7 Mar 10, 2006 10:29 AM
My Easy Star AP build. randall1959 Aerial Photography 57 Oct 11, 2005 03:08 PM
Easy Star Question on Build SkDmRkLcY Beginner Training Area (Aircraft-Electric) 6 Mar 06, 2005 03:47 PM
Easy Star build questions mrX Beginner Training Area (Aircraft-Electric) 11 Jan 23, 2005 05:56 AM
Build Questions about Easy Star DaGuy Beginner Training Area (Aircraft-Electric) 7 Oct 06, 2004 12:09 AM