Thread Tools
Old Oct 13, 2007, 10:12 PM
frankg is online now
Find More Posts by frankg
Registered User
Cool

Speed Is Alive In New Jersey


If ever you get ants in your pants to build a hot rod of a boat - this might fill the bill. It was a club project build in my club “ Garden State Model Boaters”. sorry for the plug. That turned out to be a lot of fun. The boat was an east coast 18’ Garvey that every one had to build to the same scale of 1/8” to the foot or a 27” long boat and we all used the same plans. The other restriction was that we could only use a 6 cell 7.2 volt battery pack for power. The hull and bottom had to be built straight from the plans , but the deck arrangement could be anything you wanted. The Garvey boat is a pure garden state boat having been built here for well over two hundred years in some form or other. The pure bread Speed Garvey’s, which this is not one of, can hit over 100 miles an hour and can make for a hair raising ride.
Last edited by frankg; Oct 13, 2007 at 11:27 PM.
Sign up now
to remove ads between posts
Old Oct 13, 2007, 11:46 PM
jmolwitz is offline
Find More Posts by jmolwitz
Straight up is all I ask
She really looks trim at speed , and I really like the local flavor
Old Oct 14, 2007, 12:51 AM
steveciambrone is offline
Find More Posts by steveciambrone
Registered User
steveciambrone's Avatar
Where can someone get the plans?

Thanks
Steve
Old Oct 14, 2007, 01:45 AM
Kmot is offline
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
Hey, my buddy Eddie Hansen is Commodore of that club!
Old Oct 14, 2007, 09:18 AM
frankg is online now
Find More Posts by frankg
Registered User
Kmot- Ed steped down as our leader for this year, but still remains the forever speed nut of our club. He has one of the fastest electric 1/8 scale hydro's I have ever seen out side of some articles in the mags I have read. At one of our meets he and fellow club member Jim brought their 1/8 scale hydro's and put on a speed show for the club. You haven't lived untill you see one of these beauties run across the lake at just over 60 MPH. Be perpared if you try to be a go fast guy because it cooooooost big buck's.
Old Oct 14, 2007, 10:05 AM
tim slocum is offline
Find More Posts by tim slocum
Registered User
tim slocum's Avatar
Frankg, cool boat,it really hauls the mail on 7.2v. Hey, what motor and prop did you use?
Old Oct 14, 2007, 10:41 AM
frankg is online now
Find More Posts by frankg
Registered User
STEVECIAMBRONE- I have a set of plans which I can E-mail you but they are in AUTO-CAD LT. I think I can E-MAIL you the plans as a PDF file which you should be able to open , but I need your E-mail address.
Old Oct 14, 2007, 10:55 AM
frankg is online now
Find More Posts by frankg
Registered User
Tim slocum- The motor I used was a MACK model #3600 marine motor turning direct drive to a Octura 0937/3 propeller. All the hardware on the boat was also form MACK. www.mackproductsrc.com. This is one of the simplest boats you will ever frame up or build in your life and yet it delivers kick ass speed when the right power is supplied. The whole model was built with balsa wood , completely, then coated with polyester resin (no cloth) for finish. Every little bit of weight you save means more speed. This speed thing can be contagious!!!
Old Oct 14, 2007, 11:09 AM
tim slocum is offline
Find More Posts by tim slocum
Registered User
tim slocum's Avatar
Frankg, I know what you mean about going fast being contagious! Ever since I hot rodded my Proboat Runabout, I've had a need for speed. The Mack 3600 motor is one I considered for my Classic, I wonder with a 37mm prop does the 3600 get hot? I didnt eleminate my heat problems until I went with a fan cooled motor(Titan) and a smaller prop(Octura x430) I'll tell you,for me alot of the fun of going fast is finding just the right combo of motor,esc,cooling, and prop.

Forecast for today. Sunny, high of 80deg , light wind. Daughter at work from 1pm-8pm. Batteries charging. I'M GOING TO THE LAKE!!!!!
Old Oct 14, 2007, 01:37 PM
420TEE is online now
Find More Posts by 420TEE
Registered User
Except for the flat bow it looks like a Jersey Sea Skiff which you used to race, didn't you Frank? We called a small, flat bow row boat a Garvey when I'd summer in Ship Bottom.
Ed
Old Oct 14, 2007, 04:04 PM
frankg is online now
Find More Posts by frankg
Registered User
420TEE- The only thing the two boats have in common is that they are flat bottom class boats along with SK’s, and CRACKER Box’s. The GARVEY is the simplest of the boats to construct since it is a true flat bottom with 90 degree slab sides with a flat turned up bow. All in all it really is an ugly boat with a capital “G”. By the way the real speed garvey’s use the prefix “G” in front of their racing numbers on the boat. The reason for the “H” on the model was to honor one of our members in the club who passed away after donating the plans to the club for a club project. Now JERSEY SPEED Skiff’s are a whole another story. They are not quite as fast as the Garvey’s in the straight always but can out turn them at every turn. Outlaw Speed Skiffs can hit in excess of 75 mph in the straights and kill you in the turns. And speed skiff’s in a turn are pee in your pants experience!!!.
Old Oct 14, 2007, 06:07 PM
steveciambrone is offline
Find More Posts by steveciambrone
Registered User
steveciambrone's Avatar
Quote:
Originally Posted by frankg
STEVECIAMBRONE- I have a set of plans which I can E-mail you but they are in AUTO-CAD LT. I think I can E-MAIL you the plans as a PDF file which you should be able to open , but I need your E-mail address.
Sent a Private Message

Steve


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Foamie pilots in New Jersey? JerseyPilot Foamies (Kits) 16 Feb 19, 2004 12:47 PM
R/C Warbirds Airshow this weekend in New Jersey Brian from NJ Fuel Plane Talk 0 Sep 18, 2003 04:42 PM
Electric fun-fly in New Jersey John Gallagher Electric Sailplanes 0 Jul 10, 2003 09:52 PM
HLG contest in New Jersey John Gallagher Hand Launch 0 May 24, 2003 10:50 PM
Seeking Laser cutting source in New Jersey JonB Electric Plane Talk 0 Nov 05, 2002 09:16 AM