Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Sep 27, 2007, 11:04 PM
mmartin55 is offline
Find More Posts by mmartin55
Registered User
Discussion

Vacuum Forming Machine Plans


Flying Models just published my plans for a simple and cost effective table and sliding frame set up for vacuum forming parts up to about a 6" x 12" base size. It can use plastics such as ABS, PETG and Butyrate from .020 up to .040 and greater and the whole thing can be built on a Saturday morning. It is constructed using common household tools and readily available hardware store or home improvement center materials, and include information for single or two stage vacuum operation. It also offers the facility to place a heat source above the work surface making your wife's oven obsolete except for the mundane task of cooking meals .

It's in the October issue which should be on the newstands in a few days if not already.

Tom
Sign up now
to remove ads between posts
Old Oct 25, 2007, 01:43 PM
Mike Taylor is offline
Find More Posts by Mike Taylor
Team 30 Micro EDF
Mike Taylor's Avatar
If you weren't so busy writing articles, maybe you could have fullfilled the orders you've been paid for. I am out $90 since January 17, and all I have had is silence and no model(s).

Monday is the deadline before I file criminal charges.

I could have been a great friend as I am willing to share both good and bad reviews. You suck.
Old Oct 26, 2007, 03:06 AM
markStockton is offline
Find More Posts by markStockton
F3J, F3K and F5J eXtreme
markStockton's Avatar
Hi Tom,

Can you share the plans and information here for those who don't have access to the mag, like us poor slobs in Africa?

Mark
Old Oct 26, 2007, 08:21 AM
Wylie Shaw is offline
Find More Posts by Wylie Shaw
Registered User

Plans


Quote:
Originally Posted by markStockton
Hi Tom,

Can you share the plans and information here for those who don't have access to the mag, like us poor slobs in Africa?

Mark
Mark, if you want I'll buy the rag and send em to you if needed, I'll need your addee...



Best Regards,

Wylie S.
Old Oct 26, 2007, 08:28 AM
Wylie Shaw is offline
Find More Posts by Wylie Shaw
Registered User

???


Quote:
Originally Posted by Mike Taylor
If you weren't so busy writing articles, maybe you could have fullfilled the orders you've been paid for. I am out $90 since January 17, and all I have had is silence and no model(s).

Monday is the deadline before I file criminal charges.

I could have been a great friend as I am willing to share both good and bad reviews. You suck.

Mike, How many times did you, contact Tom and talked to him? I have done a couple of transactions with him and his kits/services are top notch. I'm sure something has transpired for this to happen and I'm positive that he will make it right and I see no reason to blind side him on a public forum. If I'm wrong then I apoligize but I don't thing so.....talk to him!!!



Best Regards,


Wylie S.



P.S. I believe that Tom also has a regular job, honey do's, weekend do's and his second job...(TMRC) Things happen and communication is the key...My hat comes off for Tom and others that provide us with excellent kits and services in their spare time. It happens they can be up to their ears in alligators and things do get eaten. fall off the plate etc.....
Last edited by Wylie Shaw; Oct 26, 2007 at 08:46 AM. Reason: ADDED POST SCRIPT
Old Oct 26, 2007, 12:46 PM
Ercoupe Ed is offline
Find More Posts by Ercoupe Ed
Vintage Flyer
Quote:
Originally Posted by Wylie Shaw
Mike, How many times did you, contact Tom and talked to him? I have done a couple of transactions with him and his kits/services are top notch. I'm sure something has transpired for this to happen and I'm positive that he will make it right and I see no reason to blind side him on a public forum. If I'm wrong then I apoligize but I don't thing so.....talk to him!!!



Best Regards,


Wylie S.



P.S. I believe that Tom also has a regular job, honey do's, weekend do's and his second job...(TMRC) Things happen and communication is the key...My hat comes off for Tom and others that provide us with excellent kits and services in their spare time. It happens they can be up to their ears in alligators and things do get eaten. fall off the plate etc.....

I totally agree with Wylie.Tom has gave me top notch service and top shelf products, shipped them quickly and is always there to offer support.
Mike I think you are way off base by threatening legal action against Tom on a public forum.
It should be handled privately outside of this venue.

Perhaps if you had said
Tom, I know you've been busy, etc, could you check your orders and see if mine might have accidentally got misplaced or overlooked?
The best method would have been a registered letter by mail with a return receipt.


Good day Mike,

Ed


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Vacuum Form Machine Plans? JoeR The Builders Workshop 6 Mar 27, 2011 11:05 AM
Vacuum Forming books, plans and heaters kayaker43 Scratchbuilt Indoor and Micro Models 0 Nov 06, 2002 06:36 PM
Cad drawings and vacuum forming flailing Vendor Talk 0 Aug 21, 2002 11:06 AM
Vacuum forming Fan-Fold zbrubaker Foamies (Kits) 4 Apr 30, 2002 12:23 AM
Vacuum forming options Slope Nut Power Systems 10 Nov 01, 2001 06:34 PM