Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Oct 05, 2007, 03:50 PM
simano is offline
Find More Posts by simano
Jungmeister 55
simano's Avatar
Quote:
Originally Posted by John Redman
It is interesting to read this thread for the first time. Been pretty busy with other projects.

First off on the missing tailwheel. I caught the tail wheel wire in the car when I pulled it out, this in turn caused the keeper to come off. I did not have any CA with me to resecure it and when we flew from the track at the local college in a 10+ mph cross wind the tailwheel came off on one of the touch and go's. Flew the rest of it without it and didn't worry about it much.

The outline on this T-craft is dead on, but it has the incorrect trim scheme. We wanted to give a more classic trim scheme on this model and hence the one it comes with. This model is a reduced version of the older Hangar 9 Taylorcraft that was out a number of years ago. The real aircraft that it is modeled after lives out on the west coast, and was modified as you see it. The real bird has only one seat (we added two in our kit) and has the modified tail group for better aerobatics (we kept that because I knew you guys wanted to rock the house).

The plane flies very nice and is capable of any of the basic aerobatic manuevers. Because so many guys have installed 1020 Kv Park 480's on Mini Ultra Stick's and Mini Pulse's I conceeded and made the model capable of using either one. It doesn't need it, but you guys think all models should be doing mach 2, right? This is the perfect step up from either the Mini Pulse or Mini Ultra Stick as mentioned earlier in this thread.

We think the model is pretty light for the overall planform area. I guess it is all in how you look at it. There is a very large amount of wetted area for this sized model.

Thanks for all the support on this model, I think you will like it. It knife edges great to say the least.

Take care,

John Redman
E-Flite Product Developer
John it's great to have you share this good info with all of us on this thread.

E-Flite is certainly on the right track when it comes to quality small to medium size balsa ARF parkfliers. I own a Piper J-3 25 that's a dream to fly...and I'm sure the Taylorcraft will be another big success.

Are there any future plans for a balsa ARF Bucker Jungmeister bipe?...there are just no balsa ARF's of this plane in the parkflier size class...one of my all time favorites needless to say!!.

Gerry Rivera.
Sign up now
to remove ads between posts
Old Oct 05, 2007, 03:59 PM
taekwondo is offline
Find More Posts by taekwondo
Registered User
taekwondo's Avatar
And you fly it so well too!!
Old Oct 05, 2007, 04:55 PM
donjiskra is offline
Find More Posts by donjiskra
WAA-08 Pilot Eventually
donjiskra's Avatar
John,
I appreciate your participation. Thanks for your support.
I second Gerry Rivera about the Jungmeister, WOW that would be great!!!
"Do it and THEY will come"
Don
Old Oct 05, 2007, 05:24 PM
guapoman2000 is offline
Find More Posts by guapoman2000
Account closed
Quote:
Originally Posted by donjiskra
John,
I appreciate your participation. Thanks for your support.
I second Gerry Rivera about the Jungmeister, WOW that would be great!!!
"Do it and THEY will come"
Don
Don,

Poor Gerry (Simano) had to resort to a "scratch" build job and here is his thread.......as you will notice we just don't have the time for "Scratch" building and it is taking a long time

https://www.rcgroups.com/forums/showthread.php?t=269119

The above is a 43 inch wing span Bucker Jungmeister and super light....at least that's how we been calculating it.

Carlos
Old Oct 05, 2007, 06:02 PM
SabreHawk is offline
Find More Posts by SabreHawk
Off we go.............
SabreHawk's Avatar
Ha, ha yeah I'll third that request on the Jungmeister!

Yes sir John you guys just keep'em comming, and like the others I thank you for your professional input and info. I feel privleged to have you here.

I think the slogan for a popular snack fits well for Eflight :
Fly all you want, we'll make more!
Old Oct 05, 2007, 06:27 PM
Fokker Ace is offline
Find More Posts by Fokker Ace
Fokker Ace's Avatar
I appreciate the size of this plane. Big enough for good flying but uses batteries most of us already have a few of and components that don't cost too much. And I'd probably use the 450 motor as I think it will be more than enough for this one.
Old Oct 05, 2007, 07:21 PM
John Redman is offline
Find More Posts by John Redman
Registered User
John Redman's Avatar
Thanks for the nice comments guys. Don't worry there are plenty more where these came from. I will say my plate is full for the next few days.

I understand the getting to the basement more than the flying field.

The 450 is plenty for this model, but you know how some of the guys are, if it isn't going mach 2 it's not moving at all.

I'll be here to help you guys out when I can. If any of you are at JR Indoor, E-Fest, SEFF, or probably NEAT look me up. I'll be the one who has lost all of his sanity pumping out E-Flite birds for the masses. And believe me, I don't have a whole lot of sanity to go around.

John
Old Oct 05, 2007, 07:32 PM
guapoman2000 is offline
Find More Posts by guapoman2000
Account closed
Quote:
Originally Posted by Fokker Ace
I appreciate the size of this plane. Big enough for good flying but uses batteries most of us already have a few of and components that don't cost too much. And I'd probably use the 450 motor as I think it will be more than enough for this one.
Yes indeed the E-Flite 450 (EFLM 1400) that delivers 890kv would be perfect, however, it "is" a little pricy (certainly of high quality) but, I have just ordered this motor that is the same diameter, a little heavier and just a tad more Kv and the price is just $20 !!!

It's the new BP Hobbies A2217-9 Outrunner!

It is a "New" item at BP Hobbies:
http://www.bphobbies.com/view.asp?id...7&pid=B2632605

Here's the P-Calc estimates swinging the APC "Slow Flyer" 9 X 6 and 3-cells Li-POLYs with CC ThunderBird 18 AMP ESC.

BP Hobbies just got them in STOCK! (Limited Quantities!!!!!!!)
Last edited by guapoman2000; Oct 06, 2007 at 11:51 AM.
Old Oct 07, 2007, 06:32 AM
N827TM is offline
Find More Posts by N827TM
Mansell Models
N827TM's Avatar
When a friend emailed me the link to this bird. I did not even hesitate to back order it. This bird will definitely be a showstopper at my field. I am very excited for this bird. I have always been partial to the Taylorcraft. It is twice the plane a Cub would ever be. The Taylorcraft never really got the credit it deserved. Thank you E-flite. I like the fact that when E-flite designed this Kit it has a symmetrical airfoil like the real one. I can't wait to get out to the field and do Knife Edge and low inverted passes along with Touch and Go's. If it is anything like the full size one it will do awesome round loops. To top that, it should have some nice vertical for some beautiful Hammerhead stalls. This bird is going to Rock! I sure love the great detail that is in this kit. The weight is right on. At least I won't have to worry about the wind blowing it away when I am flying in 10+ mph wind. It is going to be a beautiful scale aerobatic bird, just like the real one. Way to Go E-flite.

Tom
Old Oct 07, 2007, 07:18 AM
donjiskra is offline
Find More Posts by donjiskra
WAA-08 Pilot Eventually
donjiskra's Avatar
Tom,
You are right on!!
I second your comments precisely.
Don
Old Oct 07, 2007, 08:41 AM
gsk11740 is offline
Find More Posts by gsk11740
Registered User
Quote:
Originally Posted by John Redman
The 450 is plenty for this model, but you know how some of the guys are, if it isn't going mach 2 it's not moving at all.
I plan to put a 480 in this bird for really no other reason than I have one laying around. It came out of my Mini Pulse that I "Brain Glitched" into the ground on a landing. I rarely flew the MP full throttle but it sure was nice to have the power when I needed it!

Gary.
Old Oct 07, 2007, 10:23 AM
r/cdawg is online now
Find More Posts by r/cdawg
Registered User
r/cdawg's Avatar
Quote:
Originally Posted by John Redman

Thanks for all the support on this model, I think you will like it.

Take care,

John Redman
E-Flite Product Developer
Hi John,
Thanks for joining in on the discussion about the Taylorcraft. I'd like to say I appreciate Eflite's efforts to constantly improve and provide a variety in your products. Your most recent products (I'm currently flying the Extra 260 480 arf) have been outstanding and very reasonably priced.

My first thoughts for the Taylorcraft are to put it on floats. I plan to install a rear hardpoint and scratch build a set of balsa floats. The lightweight construction should provide for a nice flying model.

dawg
Old Oct 08, 2007, 09:17 AM
Deepguy is offline
Find More Posts by Deepguy
Registered User

Thanks for alternate motor and information for it


[QUOTE=guapoman2000]

Yes indeed the E-Flite 450 (EFLM 1400) that delivers 890kv would be perfect, however, it "is" a little pricy (certainly of high quality) but, I have just ordered this motor that is the same diameter, a little heavier and just a tad more Kv and the price is just $20 !!!

Oh I'd like to try this moter in a Mini Pulse XT.
Also looking forward to this Tayler Craft.
Old Oct 08, 2007, 09:40 AM
John Redman is offline
Find More Posts by John Redman
Registered User
John Redman's Avatar
Putting the Taylorcraft on floats would be great. I am sure it would work out very well. Any of you guys going to the I-Hobby show in Chicago during the middle of the month? If so look me up, I'll be in the Horizon booth, enjoying the conversations.

Johnn
Old Oct 08, 2007, 12:41 PM
Gary Hoorn is offline
Find More Posts by Gary Hoorn
Chesapeake Bay RC Club
Gary Hoorn's Avatar
I finally waded through this entire thread. Chuck's comment about the AUW got my attention. This is not a foamy 3D thing but a semi-scale T-Craft. Extremely light weight has its place in windless areas or indoor flying. Those of us living in the real world experience wind! I fly my electrics in any kind of wind and prefer a bit more weight. Was interesting landing my 4S EBT in 20mph winds yesterday. I had to hold throttle to keep from flying backards!
Gary


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E flite Taylorcraft for 450 or 480 P-51C Scale ARF/RTF 23 May 23, 2009 06:11 AM
Discussion E-Flite park 450 outrunner, 980kV - suggested plane(s) or kits? dougaustin Power Systems 4 Jul 01, 2006 03:49 AM
Wanted E-Flite Park 450 Outrunner Twmaster Aircraft - Electric - Power Systems (FS/W) 3 Jun 17, 2006 12:41 PM
For Sale E-Flite Park 450 outrunner motor(3 days old) wilsonbueno Aircraft - Electric - Power Systems (FS/W) 3 Mar 01, 2006 11:10 PM
Question E-flite Park 450 vs Hacker A20-20L Jimmy Hoffa Power Systems 2 Dec 19, 2005 03:29 PM