Help with GP cessna 182. Stuck with build.... - RC Groups
Thread Tools
Sep 05, 2007, 09:32 PM
Lets go brushless
skid_68's Avatar

Help with GP cessna 182. Stuck with build....

Hey guys, hoping you can help me out. Its a stupid question, but I just dont understand what the manual is trying to tell me. I dont understand how the make the nose gear, and throttle control rods. Its saying something about a 6" threaded rod, and a 1" threaded rod. Cant I just hook up the rods like the elevator and rudder are hooked up. With just a clevis on the front end, and a 90 degree bend into the servo arm on the other. I know stupid question. But could you shed some light on this step for me? Thanks.
Sign up now
to remove ads between posts
Sep 05, 2007, 10:31 PM
Registered User
there is a plastic rod that you screw the 6" and 1" threaded rod into. That assembly then goes thru another outer plastic tube that you have to install.
It uses a quick link on one end (with a setscrew for adjustment).
The engine side uses a plastic clevis that hooks to the engine throttle.

It is a pretty good setup and allows you to kinda bend them a bit to clear components like the fuel cell

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Please help me suceed with my Cessna 182 ARF mjespiritu Beginner Training Area (Aircraft-Electric) 19 Mar 21, 2007 06:36 PM
Discussion CMP Cessna 182 (2100mm) with Zenoah G26 bob4mmi Fuel Plane Talk 0 Dec 12, 2006 10:22 AM
Help/Advice for RX problem with Parkflyers Cessna 182 kizzy Parkflyers 1 Oct 08, 2005 09:58 AM
Gp Cessna 182 help Imdbombboarder Fuel Plane Talk 2 Feb 19, 2005 11:05 PM