Current build - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by 300s, who may elect to delete unwanted replies.
Aug 29, 2007, 01:21 PM
Captured RAF FW - 190
300s's Avatar

Current build

Current build: GWS T6.

Well jumped straight to the top pf the build as a single prop plane the T6.

(Still Tinkering with):
FlyCat don't like the flexible elevator pushrod supplied so waiting to get a rigid pushrod / connections before this is ready.

Sapac T-34 after a recent repair job after I got it stuck in a tree, and shot it down with a slingshot (I was trying to salvage electrics at least but got away with a salvageable plane). I have decided to put self adhesive film to the wings and have noticed an increase in airspeed!

This plane always struggled to loop even at full speed with stock brushed and even on brushless outrunner TP 2408 - 12 on 2 cell Lipo struggles, I always had to dive before looping. Now with the film on the wings it will go into a loop at 1/2 throttle with the TP 2408 - 12 strange. Also I have noticed landing approaches are longer with it taking longer to drop in height as its keeping its speed up, strange but good never the less.

On with the GWS T-6 build.

Main wing glued together & Ailerons cut, and fibreglassing with 0.75 oz sheet and polyurethane white gloss paint.
Last edited by 300s; Sep 11, 2007 at 08:25 PM.
Sign up now
to remove ads between posts