E-Sky Lama V4 Resource Thread - Parts, Mods., Tuning, Upgrades, Etc. - Page 689 - RC Groups
Thread Tools
Jul 11, 2012, 04:27 PM
Epilepsy Awareness
Chap1012's Avatar
@Jetskeeter Thanks, I just might check that out. It sounds like you have several colors to choose from Good to see ya around

@Jack I have the bullet type weights and from the flat of one weight, to the flat of the other weight is 5 1/4" (this is the sweet spot for me) but, I'm flying a steel flybar now so that could change....I will know in a couple more flights. I assume both weights weigh the same right? You can never be too fussy when it comes to the weight and distance apart. Try a little Break Free CLP around all the moving parts of the flybar/head.

BTW, my "cherished" CF flybar broke last Friday It came down it tall grass. LOL, tall grass took it out I knew it was getting ready to break. You could see the wearing where it makes contact with the head. Dang, I filed that out good too.

Mike.
Sign up now
to remove ads between posts
Jul 12, 2012, 07:40 AM
Registered User
kodak_jack's Avatar
I'll have to keep fooling around with this thing until I get it right, but, it's been a real struggle.
Jul 13, 2012, 11:19 AM
Timmmaaaahhh!!!
whitehawk's Avatar
Hey guys. I've been thinking about getting a Lama V4 or Blade CX2 and was hoping to get several opinions about why you'd prefer one over the other. Thanks in advance.

Tim
Jul 13, 2012, 11:58 AM
Epilepsy Awareness
Chap1012's Avatar
Hi Tim. Just for starters, I prefer the V4,,,...but then again I've never owned a CX2 but have read enough about them. What I like about the V4? The motors are separated by the main shaft. The CX2 motors are mounted side by side = HEAT. The V4 has pivoting blades which ALL the CX2 owners yearn to have and mod their CX2's accordingly to obtain these pivoting blades. This mod is sometimes tricky as you have to know which will work best on the CX2. The CX2 owners will know which works best...

Electronics: It's said that Blade/Eflight electronics are better and I may have to agree since I myself switched out the Esky brick for the EFlight brick. But, I did this for a reason. 1) To get away from the 72mhz (but the V4 comes with 2.4g now). 2) so I could bind my V4 to my DX6i (my other toys are Blade).

Parts: Despite what others may say or think, parts for both can be had and many of those parts are interchangeable with both the V4 and CX2. The stock parts are a bit hard to get but, not for "hop-ups."

With the right "hop-ups" either one of these helis will handle a bit of a breeze under 5mph. Coax's are not known for flying well in a breeze but, I assure you after some flying experience you'll be out there when it is 6mph/7mph or more.

I will probably get lambasted, tar and feathered for this post as many have their different opinions. OR it will turn into a healthy debate

Just my humble opinion..AND, I think I have the best of both worlds

Mike.
Jul 13, 2012, 12:02 PM
To Soar Like An Eagle!
frieslander's Avatar
Quote:
Originally Posted by Chap1012
I will probably get lambasted, tar and feathered for this post as many have their different opinions. OR it will turn into a healthy debate

Just my humble opinion..

Mike.
Well what else would you expect since becoming the "Bull" of RC Groups?
Jul 13, 2012, 03:07 PM
Timmmaaaahhh!!!
whitehawk's Avatar
Thanks much Mike.
Jul 13, 2012, 03:34 PM
Epilepsy Awareness
Chap1012's Avatar
Quote:
Originally Posted by frieslander
Well what else would you expect since becoming the "Bull" of RC Groups?
Go pick on someone your own age...big bullfrog

You are welcome Tim..
Jul 14, 2012, 04:24 PM
Timmmaaaahhh!!!
whitehawk's Avatar
If I got a V4, would I just need to swap out the receiver if I wanted to bind it to my dx8?
Jul 14, 2012, 05:51 PM
It flies!!! ... so who cares ?
erdnuckel2's Avatar
Quote:
Originally Posted by whitehawk
If I got a V4, would I just need to swap out the receiver if I wanted to bind it to my dx8?
if you bought a 4in1, yes.
Latest blog entry: Random Pictures ...
Jul 14, 2012, 09:24 PM
Epilepsy Awareness
Chap1012's Avatar
Quote:
Originally Posted by whitehawk
If I got a V4, would I just need to swap out the receiver if I wanted to bind it to my dx8?
This works with my DX6i:
http://www.heliproz.com/prodinfo.asp?number=144800
(EFLH1024)
(HELI MODE)...I'm sure "ACRO" will work too. You'll need to reverse ELE and GYRO. No biggie

Before the DX6i, I had it bound to my HP6DSM TX.

Mike.
Jul 15, 2012, 01:16 AM
Registered User
Chap1012: That's the tutorial I used... and on doing so it looks ridiculously wrong, lol. It's is totally off just by looking at it. I know I 'm doing something wrong.... Still a newbie at this.
Jul 15, 2012, 08:29 AM
Registered User
kodak_jack's Avatar
Quote:
Originally Posted by whitehawk
If I got a V4, would I just need to swap out the receiver if I wanted to bind it to my dx8?
The answer you got was to replace the whole 4-in-1, not just the receiver as you asked about. The 4-in-1 has both a 3-in-1, which is the motor control and gyro, as well as the receiver. You can buy an "orange" receiver from Hobby King and it will be super cheap, but then you'd have to separate the motor controller from the receiver to do it. This is an old post on how to do what I just described:

https://www.rcgroups.com/forums/show...26446&page=775

The orange receiver and any other Spektrum receiver will work. I haven't read about anybody doing this in quite a while.
Jul 15, 2012, 08:52 AM
Mr. Magoo's Co-Pilot
GRUMPEE's Avatar
I Spektrumized a V3 2 years ago by just changing out the receiver portion of the 4 in one. Difference is I bound my RX to a DX6i.

https://www.rcgroups.com/forums/show...2#post16906142
Jul 15, 2012, 09:59 AM
Epilepsy Awareness
Chap1012's Avatar
Quote:
Originally Posted by Dali555
Chap1012: That's the tutorial I used... and on doing so it looks ridiculously wrong, lol. It's is totally off just by looking at it. I know I 'm doing something wrong.... Still a newbie at this.
I had to do a little "back peddling" to find out what the heck you were talking about.

Seems you are still having trouble leveling your swashplate eh? What is wrong with the tutorial on page one of this thread concerning "Klondikes Swashplate Leveling Tutorial"???

It would be helpful if you could put up some close up pics of your swash from the side and especially from the back. At eye level would be best, so we can see the angle of the swash.

Mike.
Jul 15, 2012, 10:11 AM
Epilepsy Awareness
Chap1012's Avatar
The EFLH1024 4in1 RX is a complete drop in. It doesn't get any easier
It should bind to the DX8 as it does with the DX6i. HH would know.

We are talking about removing the complete Esky 4in1 2.4g brick from the V4 right?

Mike


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Lama parts. Xtreme tial/blades/etc. GFBurke Aircraft - Electric - Helis (FS/W) 3 Feb 14, 2007 05:58 PM
Found WANTED: CORONA PARTS , NEW, USED, UPGRADES, etc... setting up for Nephew kookboy Aircraft - Electric - Helis (FS/W) 5 Jan 07, 2007 02:26 AM