Thread Tools
Aug 12, 2007, 10:18 PM
Team30 Micro EDF
NitroCharged's Avatar
Discussion

Working Micro EDF Jets


Post your working Micro EDF Jet, setup and results here!
Sign up now
to remove ads between posts
Aug 12, 2007, 10:23 PM
Team30 Micro EDF
NitroCharged's Avatar

EDF30 BAE Hawk


I just had a successful maiden of my scratch built EDF30 BAE Hawk.

Wingspan: 14"
Weight: 74g
Lipo:300mah 20C Hyperion 2 cell
Motor: Test 10mm inrunner designed by MCross
Rxer: stripped AR6100
Servo: 2 x 4g
Material: 1.67mm depron
Control: Taileron

It's earned it's wings and I will now apply the color scheme in full. I hope to get some flight photo's and video tommorrow, weather and camera-man permitting.

Aug 13, 2007, 12:30 AM
1 paycheck away from homeless
ghostmechanic's Avatar
Nitro, that is sweet!!!!!
Aug 13, 2007, 02:52 AM
Micro Jet Pilot
Chris T's Avatar
Hi,

here are my jets. The small one is an 8'' L-39 Albatros.

Specs:

- total weight 45g
- 30mm fan diameter
- 2s 220mAh lipo
- mighty midget edf motor
- yge 4bl esc
- microinvent minor rx
- falcon servos
- all balsa and glass
- launched with bungee cord
- pretty fast

Build thread: https://www.rcgroups.com/forums/showthread.php?t=437883

Electronics installation (the big challenge): https://www.rcgroups.com/forums/show...ht=8+micro+jet

Video: https://www.rcgroups.com/forums/show...39#post7808175



Chris
Last edited by Chris T; Aug 13, 2007 at 02:11 PM.
Aug 13, 2007, 10:30 AM
Registered User
msnyder's Avatar
This promises to be a fascinating thread.
Aug 13, 2007, 11:13 AM
Dr John
pmpjohn's Avatar
Here is my newest Nano park edf. All Depron F-15 twin edf.

WS 17.25"
AUW 186gr.
Two hi volt GWS EDF40's
3s 400mah 20c pack
Two Polks 4.7gr servos
AR6100 rx
3 Channel AET no mixing required

Kit to be released soon.

John
Aug 13, 2007, 12:48 PM
Registered User
JookSing's Avatar
Quote:
Originally Posted by pmpjohn
Here is my newest Nano park edf. All Depron F-15 twin edf.

WS 17.25"
AUW 186gr.
Two hi volt GWS EDF40's
3s 400mah 20c pack
Two Polks 4.7gr servos
AR6100 rx
3 Channel AET no mixing required

Kit to be released soon.

John
Whoa!!! You can't just post that without a video! Looks great!
Aug 13, 2007, 01:24 PM
Dr John
pmpjohn's Avatar
Quote:
Originally Posted by JookSing
Whoa!!! You can't just post that without a video! Looks great!
Sorry, no video at this time. Discussion and more pics here

https://www.rcgroups.com/forums/showthread.php?t=723636

John
Aug 13, 2007, 04:26 PM
Micro Flyer, Big Poster
Pete P's Avatar
Micro jet, built a while ago :-D
6mm motor, 1" shroud. 4G thrust, at full power. 170mAh cell, Bit-radio.

110% Pinky Stick model. Weight unknown, measurements lost.

Approx 12" wingspan, and approximate weight of 10g.
Last edited by Pete P; Aug 13, 2007 at 10:23 PM.
Aug 13, 2007, 06:03 PM
For Sale-everything over 250 g
Pete, more info please.

My Alley Cat from plans by Racerx208
Wingspan: 12"
Weight: 36g
Lipo:130mah Atomic Cyclon 2 cell (130mAh Full Rivers if you just want to cruise around)
Motor: 10mm inrunner in a 22.5mm duct cut down from a GWS EDF30
Rx: Falcon
Servo: Falcon 1.6gr Aileron and elevator
Material: 2mm depron
I had to put 4 LEDs on it so I could see it better. Needs calm air to fly. Not real fast but lots of fun. Really easy to fly!
Aug 13, 2007, 09:12 PM
Supersonic hover
Esprit440's Avatar
Great stuff guys! A few years ago it would have been hard to believe these little jets were possible, but here we are.

My SharpShooter:

WS 14"
AUW 4.9oz
Aileron, elevator, and throttle
1 & 3mm Depron and carbon rod construction
GWS EDF-40 with 5800kV Feigao inrunner
3S TP 730, Berg 4L w/Lightenna, CC-10, BMS-303 servos

Flew ok but slow (~35mph) due to restrictive inlets.
Last edited by Esprit440; Aug 13, 2007 at 09:20 PM.
Aug 13, 2007, 09:19 PM
Supersonic hover
Esprit440's Avatar
Bit of a dud here, my little Su-30. Inspired by a MiG-29 in the Nano Bandit thread.

WS 12.5"
AUW 4.7oz
Tailerons and throttle
3mm Depron and carbon rod construction
GWS EDF-40 with 5800kV Feigao inrunner
3S TP 730, Berg 4L w/Lightenna, CC-10, BA-3.6 servos

Never did fly well because of thrust line problems.
Last edited by Esprit440; Aug 13, 2007 at 09:24 PM.
Aug 13, 2007, 09:24 PM
Supersonic hover
Esprit440's Avatar
Many, many crashes before I got this one working right but it was worth it. Very fast, very finicky.

Plans here

The Stickler:

WS 12.7"
AUW 5oz
Aileron, elevator, and throttle
3mm Depron and carbon rod construction
GWS EDF-40 with 5800kV Feigao inrunner
3S TP 910, Berg 4L w/Lightenna, CC-10, BMS-303 servos
Last edited by Esprit440; Aug 13, 2007 at 09:31 PM.
Aug 14, 2007, 02:54 AM
TheyreComingToTakeMeAway!
derk's Avatar
if the plane isnt modeled after anything, is it ok to post it?
Aug 14, 2007, 03:31 AM
Registered User
Is it a working micro edf jet?


Never saw the word "scale" in there.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
micro EDF: how much pitch? steve glass Electric Ducted Fan Jet Talk 6 Oct 17, 2002 01:00 PM
Dime-store glider/GWS Micro EDF conversion... rlinscheid Electric Ducted Fan Jet Talk 9 Jan 19, 2002 08:33 AM
MiG-15 for EDF 50: micro EDF action! Thomas B Parkflyers 2 Dec 27, 2001 08:27 AM
micro edf opualuan Electric Ducted Fan Jet Talk 8 Sep 30, 2001 05:23 PM
homebuilt micro edf berniep1 Electric Ducted Fan Jet Talk 20 Aug 07, 2001 12:18 AM