Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Dec 07, 2011, 03:58 PM
crxmanpat is offline
Find More Posts by crxmanpat
Foam abuser!
crxmanpat's Avatar
With that equipment you're probably at around 14oz Al.

EDIT - Just went back through my original posts here. With a Scorpion 2215-32 motor and a 3S 1000mAh 25C lipo, I was at 13.4oz AUW.

Pat
Sign up now
to remove ads between posts
Old Dec 07, 2011, 04:09 PM
alpea 41 is offline
Find More Posts by alpea 41
check for reversed controls
alpea 41's Avatar
Thanks Pat , That big truck guy PM ed me with questions about weight and set up.
Old Dec 07, 2011, 04:27 PM
crxmanpat is offline
Find More Posts by crxmanpat
Foam abuser!
crxmanpat's Avatar
Talking to him too. Think we've got him all set up now.

Pat
Old Dec 07, 2011, 10:06 PM
Dennis Everett is offline
Find More Posts by Dennis Everett
Registered User
Dennis Everett's Avatar
Mines 12.9 -13 oz rtf , sure is a fun plane ! I just got some 55c 1000 mah 3s packs for mine , After seeing all the planes Al has that Pat sells , this bigger one flys pretty close to those , and they all fly great ! ... Dennis

Pat , pm me a cost on cases of foam if you will please .
Old Dec 07, 2011, 10:13 PM
crxmanpat is offline
Find More Posts by crxmanpat
Foam abuser!
crxmanpat's Avatar
PM'd.

Pat
Old Dec 10, 2011, 07:28 PM
Dennis Everett is offline
Find More Posts by Dennis Everett
Registered User
Dennis Everett's Avatar
Flew mine again today , but with a super park jet little screamer that was rewound to a prop's kv , perfect now !
Old Dec 10, 2011, 11:08 PM
alpea 41 is offline
Find More Posts by alpea 41
check for reversed controls
alpea 41's Avatar
Here's the video.
Flown by Dennis and then handed off to Bob Vincent . It has more pep now.
20111210 0184 (2 min 29 sec)
Old Dec 11, 2011, 01:11 AM
crxmanpat is offline
Find More Posts by crxmanpat
Foam abuser!
crxmanpat's Avatar
Looks like Dennis has found a new favorite plane.

Pat
Old Dec 11, 2011, 01:56 AM
alpea 41 is offline
Find More Posts by alpea 41
check for reversed controls
alpea 41's Avatar
It's just a matter of time till he tries your minni MOCHINE Pat. lol
Old Dec 11, 2011, 12:16 PM
Byrdman is offline
Find More Posts by Byrdman
Winter Haven FL
Byrdman's Avatar
Started last night and finished cutting this morning. Made out of foamboard from Michael's craft store (I had to do something while my wife was Christmas shopping yesterday) Since this is my first foam pusher, I will probably leave the paper on and get a bigger engine to make up for the weight. My flying skills are rusty anyway, so slower and heavier wont upset me. The next one will be lighter and fast. Feel free to offer suggestions and comments.
Old Dec 11, 2011, 12:23 PM
crxmanpat is offline
Find More Posts by crxmanpat
Foam abuser!
crxmanpat's Avatar
Very nice. But even with the added weight, the 2212-6 2200kv motor should work just fine. Bigger motor = bigger lipo = more weight anyway. With the 2212-6 you get about 24oz of thrust, and even if it weighs heavier at 18-19oz, you still have more than 1:1 thrust to weight ratio.

Pat
Old Dec 11, 2011, 12:42 PM
Byrdman is offline
Find More Posts by Byrdman
Winter Haven FL
Byrdman's Avatar
Quote:
Originally Posted by crxmanpat View Post
Very nice. But even with the added weight, the 2212-6 2200kv motor should work just fine. Bigger motor = bigger lipo = more weight anyway. With the 2212-6 you get about 24oz of thrust, and even if it weighs heavier at 18-19oz, you still have more than 1:1 thrust to weight ratio.

Pat
Thanks for the info Pat. Any recommendations I can get on electric setups, the better.

I flew nitro years ago, and I built (and crashed) a lot of SPADS. I got out of it because my local field closed down and it is a bit of a travel to the new field. Now my son is getting the fever, and we have a vacant subdivision next to our house, so I'm trying to get back into it with electrics. Thanks again!!
Old Dec 14, 2011, 01:32 PM
Flyboy Steve is offline
Find More Posts by Flyboy Steve
Registered User
Really like the looks of this plane! And the U Tube videos are awesome!!

I'm thinking about building a somewhat smaller version of the model featured in Post #1. Would like to use a "Blue Wonder" type 1700 KV motor w/ an 8 x 6 prop and an 850 mah Lipo.

What scale factor would you suggest? (I.e. what actual LENGTH should I use; I can scale the rest proportionately...)

Thanks!
Old Dec 14, 2011, 01:33 PM
Dennis Everett is offline
Find More Posts by Dennis Everett
Registered User
Dennis Everett's Avatar
Pat , have you ever ordered from rc foam ? If so , was wondering how long they take to ship ? I ordered last week , still dont have it .

A friend has a cnc machine and were gonna try to cut flat foamys out with it , lol , he uses the machine to make full size p-40 parts ...
Old Dec 14, 2011, 03:06 PM
crxmanpat is offline
Find More Posts by crxmanpat
Foam abuser!
crxmanpat's Avatar
Dennis,

No, I've never actually orderd from them directly. I've either had it delivered in person at a show, or get it from my local distributor who buys from them in bulk.

Pat


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video f-22 with average pilot leadfeather Electric Plane Talk 1 Apr 24, 2008 01:49 AM
Video RCSuperPowers F-22 with Vectoring Thrust RCSuperPowers Electric Plane Talk 25 Feb 18, 2008 05:00 PM
Wattage F-22 with mixed surfaces & 208 watts/lb!! (video) meteor Electric Ducted Fan Jet Talk 30 Feb 09, 2005 10:57 AM
Wattage F-22 with ducted fan The Blue Max Electric Ducted Fan Jet Talk 11 May 10, 2003 02:13 PM
f-22 with jeti brushless ivorz Foamies (Kits) 14 Oct 01, 2002 09:39 PM